cat 3520 e used for sale

Material: Normal steel Engine drive: 18.5 kW Dimensions: L 2000 mm x W 550 mm x H 1000 mm Kerb weight: approx. 300 kg Dimensions: L 2000 mm x W 550 mm x H 1000 mm Speed: 261 rpm Capacity: approx. 45 m3/h Operating voltage: 400 V Tech. Documentation: No Condition: Used Tech. Documentation: No Accessories: Conveying pressure 2 bar

Machine Size 2800 x 1940 x 2000mm Min. Size of machined panel 200 x 35 x 8mm Max. size of machined panel 3200 x 900 x 60mm

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axisPackage Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C ...

brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 93-1420 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel construction, machine platform, used steel scaffolding Manufacturer: EHINGER IMPIANTI Dimensions approx. 4.8 x 4.6 x 8.7 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

Following Winches For Sale Mkae:SEC Type:EAMW-62-120 & EMW 120

Variable area flow meter for heat transfer oil, H250/RR/M40/HT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C 6 months warranty We give yo ...

Technical data: Drive motors/ motors Number: 7 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/r/min 1461/228 KW 1.5 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully autom ...

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

Malt Mill Sommer Maltman 110, capacity 150 kg/h This Maltman 110 malt mill is suitable for micro- and small breweries and micro-distilleries Malt kernel is crushed to produce grit, whereby the flour proportion is low and the husk remains largely intact. This enables the ideal preparation of the malt for the brewing or distilling process, and it also provides a natural filter layer for purifying. It has two rolls which one is driven by an electric motor with belt drive. Rollers made of high-alloy steel - fully through-hardened and regrindable. Roller distance is infinitely variable and it can be quickly adjusted. Malt mill has inbuilt magnetic separator and foreign body ejector. Mill was manufactured in year 2019 by German Egon Sommer and it is in very good operational condition. Technical Characteristics Manufacturer Egon Sommer Maschinenbau GmbH Manufacturer’s model Maltman 110  ...

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/140 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully  ...

Technical data: Drive motors/ motors Type: three-phase motor Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/282 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully automa ...

Complete chocolate production plant, plant components: - Beetz MK 2/500 chocolate mixer, refurbished 2023 with new electrics and new dust filter. Connecting belt to the 3-roll mill - Bauermeister DW 51 three-roll mill, refrubished 2023 with new electric and water station, connecting belt to the 5-roll refiner - Bühler SFG 1000 five-roll mill, refrubished in 2023 with new electric and water station, connecting belt to the conche - Frisse DÜC 1R Conche, refrubished 2023 with new electrics and new metal sieve separator - RF Block Melter/Fat Melter, new 2023 - RF bag feeding station (suction conveyor system), new 2023 The entire system is dismantled and stored in our warehouse in Germany. Documentation available. The facility is sold in existing condition, free loaded truck, packing and/or, container stowage are not included in the price

2000 ESD open-fronted storage bins as good as new Manufacturer: UTZ Exterior dimensions : 350 x 210 x 145 mm Interior dimensions : 305 x 180 x 134 mm Material: PP conductive Side walls closed, 1 short side with opening Bottom closed 1 shell handle Colour: black Stackable Condition: Very good Negotiation price: € 6.2 net from stock Retail price per pallet: € 5.00 net from stock 121 pieces per pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Centrifugal pump Manufacturer: Fristam Type: ET232 N°: 55059 Power: 11 kW Speed: 2910 rpm

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

; Transport weight [kg]: 475

Type ECO II 40/40 SC

1 of used pneumatic, overhead mounted, moveable on rails, industrial manipulator / lifting device (balancer), make Dalmec, type Partner Equo PES, new 1993. Gripper-head with 4 length/width simultaneously adjustable suction cups (from 1.110 x 360 to 1.650 x 650 mm) with venturi vacuum generator for max. load 120 KG. Maximum turning radius 2.500 mm. Vertical stroke 1.250 mm. Tube length 5.000 mm. Last used for handling sheets of steel. Rails not included.

Key data: 400 KW

MAN E2842 LE322 Complete TRIGENERATION Plant Hours 14,500 Year 2017 Fuel NAT GAS Voltage: 400 V Scope of supply: The plant includes Engine, Alternator, Prefabricated Room, Intercooler, Skid, Aircooler, Gas Ramp, Radiator, Heat Exchanger, New / Exhaust Oil Exchange System, Exhaust Gas Chimney, Control Panel (Siemens), electrical panels, silencer, gas compressor, metering systems, pumps, chiller, afterburner, various stainless steel pipes. Capacity 401 kW. It is currently limited to 355 kW to work with low emissions. Also available in a cogeneration-only setup (180,000 €). Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...