cat 3520 e used for sale

Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: 3 ...

Esterer HDE71 Stroke 500mm fully hydraulic

Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...

Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The scr ...

9000 pcs SSI Schaefer Plastic Box EF4120 ESD Used goods, very good condition, see pictures Volume 10.1l Load capacity per crate 15 kg Outer length: 40 cm / Inner length: 35.6 cm Outer width: 30 cm / Inner width: 25.6 cm Exterior height: 12 cm / Interior height: 11.7 cm ESD Color: Black Dimensionally stable and robust Stackable on top of each other 144 pieces per pallet Negotiation price: € 4.50 net from stock Retail price: € 4,- net from stock upon acceptance of 1 pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices exc ...

Nr. 02 VERTICAL LATHES FAMAR MODEL: ERGO 230 SERIAL NUMBER: FAMAR NR. 20.09/1-20.09/2 SWITCHABLE Ø: 250 MM SWITCHABLE HEIGHT: 125 MM Ø SELF-CENTERING: 250 MM SPINDLE ATTACHMENT: 6 ASA ROTATIONAL SPEED: 6000 RPM TOOLHOLDER STATIONS: NR. 12 MOTORABLE: NR. 12. CONTROL: SIEMENS 810

Used Ciat LDC 100V EVO R410A air-cooled chiller on R410A built in 2016. Complete with 1 Copeland ZP120KCE-TFD-455 scroll compressor, condenser with 1 EBM-Papst A8D800-A101-05 fan - 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm and a total airflow of 16.700 m³/h, brazed heat exchanger as evaporator, Wilo MHIL502-E-3-400-50-2 water pump, expansion vessel, control cabinet with a Ciat Connect2 controller and a Schneider Electric VW3A4422. Specifications: Brand: Ciat Type: LDC 100V EVO R410A Product type: Air cooled chiller Capacity kW: 26,3 kW Capacity tons: 7,5 Tons Refrigerant: Freon Refrigerant type: R410A Weight: 388 kg Dimensions: 2050x1060x1500 mm (LxWxH) Compressors type: 1 Copeland ZP120KCE-TFD-455 Display: Ciat Connect2 Number of fans: 1 Fan specifications: 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm Amount in stock: 1

VERTICAL LATHE FAMAR MODEL: ERGO 210 YEAR: 1995 SERIAL NUMBER: FAMAR NR. 95/12 MAX MACHINABLE DIAMETER 200 MM LENGTH OF WORKPIECE MAX MACHINABLE 150 MM X-AXIS STROKE: 340 MM Z-AXIS STROKE: 215 MM FAST AT 60 M/MIN ASA CHUCK NOSE 6 " SPEED: 6000 RPM

EX Protected Forklift Battery 24V + Charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough No. 57534134010 Nominal voltage: 24 volts Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Charger Silent HFX 24V - 55 A Benning E230G24/55B-HFX 24 V 55 A Uses The EPzS series of traction batteries are ideal energy storage systems for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and high cyclic loads.  Technical features > Robust lead-acid technology with liquid electrolyte > Proven tube plate technology for long service life > Ful ...

weight max. in kg: 2500 kg stroke: 4150 mm load center: 600 mm free lift: 150 mm construction height: 2814 mm fork length: 1200 mm fork holder width: 1150 mm Frame width: 1050 mm daylight opening: 110-1320 IK-IK mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERMAK HGS 2600 X 6 guillotine shears built in 2006 in Turkey are designed for cutting sheet metal with a maximum thickness of 6 mm. The machine performs this process using precise cutting knives with an option to adjust the gap between the blades. The simple design, with an efficient drive system, further ensures trouble-free operation throughout its lifetime, while maintaining the highest cutting quality. The ERMAKSAN HGS 2606 guillotine shears weighs 5000 kg. Technical specifications of the ERMAK HGS 2600 X 6 guillotine shears - maximum workpiece thickness: 6 mm - maximum workpiece length: 2600 mm - number of strokes: 20/min - oil tank capacity: 150 l - motor power: 11 kW - power supply: 380 V - dimensions (L x W x H): 3395 x 1880 x 1550 mm - weight of machine: 5000 kg

Hollow hip machine Haas EWB Price: £25,000 Machines # 3379 Built: 1975 Power: 10 kg/hour Connection power: 2.5 KW Volt 3x 380 Natural gas:? Location: Poland Dimensions -Length: 3.20m Bed: 1.70m -Height: 1.40 m The machine is used to make holhippets between 50 and 220 mm in length. The thickness can be adjusted manually.

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Philips mobile C-arm BV Endura with Tube F 017 0.6/1.4 Image intensifier 23 cm Monitor trolley with double monitor (flat screen) • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Incubator with control up to approx. 80°C with approx. internal masses 400 x 500 x 350

Storage Tank 920 Litres with cooling jacket in AISI 304 NEW, incl. TÜV Certificate Standard Features: Total Height: 2460 mm Body Height: 1900 mm Diameter: 850 mm weight: approx. 240 kg max.working pressure product space: 6 bar Material of tank: 1.4301 max.working pressure cooling jacket: 1 bar max.working temperature to °C: 130 Surface inside: III C

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...

Corima (Marchesini Group) self-adhesive top labeller for cartons (vignettes, bolini etc), fitted with Argus code reader. Carton size range: Length - up to 100 mm Width - 70 to 200 mm Height - 10 to 100 mm Label Dimensions: Height - 10 to 50 mm Length - 20 to 80 mm Electrics - 380V/50Hz, 1kW. Infeed height 830 to 890 mm Machine footprint approx. 1100 x 1000 x 1750 mm (L x W x H) Net weight approx. 350kg Output up to 250 cartons per minute.

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Key data: 6000 mm, 4 mm

With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Couplings electromagnetic-mechanical-hydraulic for all machine tools

Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t  Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW

N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1

20,000 liters tank with thermal insulation not used tanks

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

1 pcs videojet inkjet printer untested, sale as spare dispense partr no nice optical condition 170i Excel

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm

For sale is a used high-temperature analyzer, from the manufacturer Elementar Analysensysteme GmbH. The liquiTOC trace is functional and ready for use. Year of Make: 2007 Mains voltage: 120-230 V AC +-10%, 50/60 Hz Connected load: approx. 1.9 kVA Operating Modes: TC, TIC, TOC, NPOC, POC Calibration: linear Sample volume: 0.05-4ml, depending on the concentration range Analysis duration: 6-22 min, depending on operating mode Sample storage type: PS 61E Weight: approx. 50kg The instruction manual is provided. Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation.  ...

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

Key data: 350 mm, 1470

Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...

High-frequency degaussing tunnel - 500x150 mm Properties Article number EDTR501505 Tunnel length 160 mm Passage size 500x150 mm Mounting interface Mounting hole Ø12.5 mm (8x) Material housing Polyurethanes (PUR) Surface treatment/finishing Painted Colour Red (Traffic red): RAL3020 Min./max. ambient temperature -10 to 40 °C Dust/water protection class IP55 Supply voltage 230V AC+N+PE; 50/60 Hz Apparent power 4268 VA Duty cycle 100%, 24 hours/day Control Not included Thermal protection Yes Indicator light demagnetizing on (blue) Yes Depth 230 mm Width 880 mm Height 467 mm Weight 135 kg Read more Price on request Article number: EDTR501505 Product These tunnels demagnetize long products and materials with an irregular surface. For thin-walled products up to 10 mm wall thickness or solid products up to 20 mm thick. High-frequency tunnels demagn ...

This 3-axis EMCO EmcoMill E900 was manufactured in 2018. The vertical machining center is equipped with a Siemens 828D control system and offers a spindle speed of up to 12,000 rpm and a torque of 83 Nm. It has a travel of X 900mm, Y 500mm, Z 500mm and a rapid traverse speed of 24m/min. The machine has a 360l coolant pan and a 20-cavity tool magazine. If you are looking for a high-quality milling machine, you should consider the EMCO EmcoMill E900 machine that we have for sale. Contact us for more information. Brand: SIEMENS Model: 828 D Spindle Speed Range: 50-12000 Number of axes: 3 X-axis travel: 900 mm X-axis rapid traverse: 24 m/min Y-axis travel: 500 mm Rapid traverse Y-axis: 24 m/min Z-axis travel: 500 mm Rapid traverse Z-axis: 24 m/min Outer length: 1000 mm Outer width: 520 mm Minimum distance between vertical spindle and table: 100 mm Maximum distance between ver ...