cat 3520 e used for sale

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 40 pieces expandable to 51 Filter pressure: 8 bar Expiration: closed Plate transport: automatic Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Cat. No. 13-0033 in a very good condition Typ: RF32DT71D4 Testing water by 22°C back pressure at 1 bar Pressure: 0,3 bar capacity: 5.100 litres/h Motor: 0,37 kW Connection: DN 40 - can be changed on request for an additional charge Measurements: with frame: pump: length: 33 cm 45 cm width: 20 cm 23 cm height: 84 cm 50 cm weight: 56 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Cover with filter Drain valve in the bottom high-quality Manufacturer: Fa Edak AG Schaffhausen Switzerland Jacket pressure: 2 bar Temp inside: 96 ° C Jacket: 96 ° C Capacity: 106 l No.: 1221 Year of construction: 1990 Dimensions: LWH = 800 x 600 x 1200 mm

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange

Maximum label roll diameter 350 mm Rollenkerndurchmeser 76 mm, incl. adapter for other diameters Stufenos adjustable wrap speed Dimensions 800 x 400 x 300 mm (L x W x H)

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Manufacturer: BUSCH Type: RC 0025 E501 Capacity: 25 m3/h Vacuum pump BUSCH type RC 0025 E501 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Cat No. 14-0007 in a very good condition Measurements and Weight: WxHxD: 600 x 460 x 400 mm Weight approx: 44 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

; ready for operation

; ready for operation

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

; ready for operation

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d63 DN50, PN 6, IP 65 P Max: 6 bar Quantity: There are 10 units available.

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

<br>Spinner for ECRM VR 36 / 46 silver, refrushed 2011, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36 HS, ECRM VR 36/46-HS, 30,000 RPM, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty.<br><br>Still in operation: Yes<br>Available: Yes

<br><br><br>Still in operation: Yes<br>Available: immediately

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

R26097/16 EDELMANN reel offset printing machine model: COLOR PRINT V72 SL age: 2008 paper web width: max. 720 mm printing width: max. 710 mm available: about 12/2011 Servo- drive microprocessing control reel/reel, reel/ sheet unwinder: reel diameter max. 127 cm BST web edge – and centre control Web length control 2 offset printing units automatic ink unit wash-up web turn hole punch device cross cutter UV dryer plow fold system Available: nach Absprache

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New