cat 3520 e used for sale

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Code: 0296 Brand: MSW - MOTOR TECHNICS Model: MSW - EDGE - DOOX3 - CE Standard Edge bander with glue pot - Single-phase V 220 motor - for furniture, panels, carpentry, custom-made furniture, DIY, doors and various - CE Standard - Year 2024 Technical data: Motor Single-phase V 220/50 Panel height 10/60 mm Edge thickness 0,3 - 3 mm Nominal power 2020 W Feed speed 0,5-5 mt/min Glue container volume 600 gr Upper and lower trimming unit Upper and lower brush unit End trimming shear unit with foot pedal Panel support roller conveyor Base with wheels Operating pressure 4-6 atm Overall dimensions mm 1570 x 585 x 1080 h Weight kg 90

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

General SKU390X1059 MakeAlfa Laval LocationBarneveld CEcheck TypeCB300-64H Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5 m2 Size length985 mm Sizes width365 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface5 m² Capacity17,87 / 22,08 l. Number of platens40 Plate sizes365 x 985 mm ConnectionsDN100 & DN65 Max. temperature—160 / 225 °C Information No.18306251 Year of construction2008 Mounted on framecheck Floorspace0,60x0,43 m Total height1,50 m Weight135 kg Extra SpecificationsPressure S3S4=-1/25-33 bar, test pressure 47 bar, S1S2=-1/16-16 bar, test pressure 29 bar Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...

General SKU279X358 MakeAlfa Laval LocationBarneveld TypeIV Pressure Vacuum possiblecheck Working pressure shell6.5 Bar Vacuum possible shellcheck Working pressure tubes6.5 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface3 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface3 m2 Tube capacity16 l. Max. temperature130°C Shell connectionsDN40 Cover connectionsDN40 Information No.18892 Year of construction1991 Mounted on legscheck Floorspace0,80 x 0,65 m Total height1,50 mShell and tube heat exchangersAlfa LavalHeat exchangers > Shell and tube heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU397X1110 MakeQVF LocationBarneveld CEcheck TypeSBD8199 / 6861 Pressure Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)glass Tube (Material)Stainless steel Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Stainless steel 1.4571 (316Ti) Heat exchangercheck Verticalcheck Tube capacity105 l. Max. temperature—20 / 150 °C Shell capacity33 l. Shell diameter300 mm Shell length1000 mm Max. temperature—20 °C/ 150 °C Information No.6826 Year of construction2010 Floorspace0,45x0,45 m Total height1,20 m Weight200 kgShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...

General SKU397X1143 MakeGab Neumann LocationBarneveld CEcheck TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Horizontalcheck Heating surface1,2 m2 Tube capacity11.7 l. Max. temperature-30°C/+180°C Shell capacity5,5 l. Max. temperature-30°C/+80°C Shell connectionsDN100 Cover connectionsDN50 Information No.28218-21618 Year of construction2010 Floorspace0,70x0,70 m Total height0,70 m Weight315 kgShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU379X947 MakeFeddem TypeFED 026 MTS Mach.No.201706041 Year of construction2017 Sizes Screw diameter26 mm Main Features Motor34 KW Inlet diameter42 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter26 L/D32/42 Co-rotatingcheck With vacuum pumpcheck Number of heating zones:10 Water coolingcheck AC-motor34 kW, (400 V, 1890 rpm) Screw speed1200 rpm Feeding with metering screwcheck MaterialStainless steel Information LocationBarneveld With switchgearcheck Without switchgear (as is) Sizes switchgear1,8 x 0,60 x 2,20 m Floorspace3,10 x 0,881 m Total height2,072 m Weight2200 kg CEcheckDouble screw extrudersFeddemExtruders > Double screw extrudersBrand > Feddem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU397X1113 MakeGab Neumann LocationBarneveld CEcheck TypeN-A-1,8 Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface1,2 m2 Tube capacity12 l. Max. temperature-30 /+180 Shell capacity5,5 l. Max. temperature-30 /+80 Shell connectionsDN50 Cover connectionsDN100 Information No.K25153 Year of construction2016 Floorspace0,70x0,70 m Total height0,685 m Weight320 kgShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU397X1114 MakeGab Neumann LocationBarneveld CEcheck TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface1.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface1,8 m2 Tube capacity10,5 l. Max. temperature-30°C/+180°C Shell capacity5,5 l. Max. temperature-30°C/+180°C Shell connectionsDN50 Information No.24981-19728 Year of construction2006 Floorspace0,70x0,70 m Total height0,60 m Weight320 kgShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

General SKU390X996 MakeWilhelm Deller LocationBarneveld TypeBEM 324/1350 Pressure Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes65 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,25 m² Tube capacity44 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1350 mm Max. temperature—10 / 330 °C Shell capacity24 + 8 Ltr. Shell diameter300 mm Shell length1900 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.38028/2 Year of construction2012 Mounted on framecheck Floorspace2,0 X 0,50 m Total height0,965 m Weight725 kgShell and tube heat exchangersWilhelm DellerHea ...

General SKU400X1196 LocationBarneveld CEcheck Pressure Working pressure24 Bar Main Features MaterialStainless steel Volume130000 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump MaterialStainless steel Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity30-130 m³/h With motor1,5 kW 400 V 1500 rpm With frequency invertercheck (as is) InletDN65 OutletDN65 Information MakeSeepex TypeBCSO Mach.No.198504 Floorspace1,35 x 0,20 m Total height0,25 m Weight75 kgEccentric Screw PumpsSeepexPumps > Eccentric Screw PumpsBrand > Seepex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU390X1020 MakeAsdorfer Eisenwerk LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes55 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,2 m² Tube capacity46 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1348 mm Max. temperature—10 / 330 °C Shell capacity70 Ltr. Shell diameter324 mm Shell length2006 mm Wall thickness shell5 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.077713-1 Year of construction2008 Mounted on legscheck Floorspace2,15 x 0,45 m Total height1,00 m W ...

This CASADEI Bordatrice E350PM was manufactured in 2022. It features a panel height range of 10-45 mm and supports edge band thickness from 0.4 to 2 mm. The machine operates at a feed belt speed of 7 m/min, with a glue pot heating power of 1490 W. Consider the opportunity to buy this CASADEI Bordatrice E350PM edgebander. Contact us for more information.

General SKU390X1013 MakeAsdorfer Eisenwerk LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes55 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,2 m² Tube capacity46 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1348 mm Max. temperature—10 / 330 °C Shell capacity70 Ltr. Shell diameter324 mm Shell length2006 mm Wall thickness shell5 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.077713-2 Year of construction2008 Mounted on legscheck Floorspace2,15 x 0,45 m Total height1,00 m W ...

This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine.

General SKU397X1137 MakeGAB Neumann LocationBarneveld TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite G16-5-180 Heat exchangercheck (cooler/chiller) Notified bodyGAB Neumann Heating surface1,2 m² Tube capacity11,7 Ltr. Number of tubes:1 Tube diameter180 mm Tube length700 mm Max. temperature–30 / +180 °C Shell capacity5,5 Ltr. Shell diameter600 mm Shell length244 mm Max. temperature–30 / +80 °C Shell connectionsDN50 Cover connectionsDN100 Information No.31786—22873 Year of construction2013 Floorspace0,7 x 0,7 m Total height0,7 m Weight300 kgShell and tube heat exchange ...

General SKU397X1135 MakeGAB Neumann LocationBarneveld TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite G16-5-180 Heat exchangercheck (cooler/chiller) Notified bodyGAB Neumann Heating surface1,2 m² Tube capacity11,7 Ltr. Number of tubes:1 Tube diameter180 mm Tube length700 mm Max. temperature–30 / +180 °C Shell capacity5,5 Ltr. Shell diameter600 mm Shell length244 mm Max. temperature–30 / +80 °C Shell connectionsDN50 Cover connectionsDN100 Information No.29593—22051 Year of construction2013 Floorspace0,7 x 0,7 m Total height0,7 m Weight300 kgShell and tube heat exchange ...

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

General SKU390X1032 MakeWilhelm Deller LocationBarneveld TypeBEM 324/1350 Pressure Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes65 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,25 m² Tube capacity44 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1350 mm Max. temperature—10 / 330 °C Shell capacity24 + 8 Ltr. Shell diameter300 mm Shell length1900 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.38028/1 Year of construction2012 Mounted on framecheck Floorspace2,00 x 0,50 m Total height0,965 m Weight725 kgShell and tube heat exchangersWilhelm DellerH ...

Used 5-stage evaporation station made by Unipektin. Technical data: - Year of manufacture: 1986 - 5-stage evaporator with aroma trap - Input: raw juice: 22730 l/h - Input: filtered juice: 12810 l/h - Output: juice after the first cycle: 13825 l/h - Output: concentrated juice 70 Bx: 3745 kg/h - Heating steam requirement: 5450 kg/h - Electricity requirement: approximately 150 kW (without refrigeration units) - Water requirement: 10 m3/h - Aroma yield (150 times) 150 l/h - Aroma outlet temperature: 7 degrees C - Condensation efficiency: 9,200,000 kJ/h

Camera module, max. passage width 650mm, max. 420mm camera scan width, own drive with servo motor, vacuum transport belt at the top, module length 800mm, order evaluation and documentation, connection to HHS quality assurance system possible.

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump

The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.

Erlab Captair Filtair 936 Filter Extractor Erlab's exhaust-free, filtering chemical extractors offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless benefits that provides end-to-end protection throughout the lab and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Pros Complete user protection Filtration safety : All models of captair filtair filter extractor comply with the AFNOR NFX 15-21 1 Class II standard. Pollutant retention capacity of chemical vapours in the working area, guaranteed by controlling the air velocity on the façade and complying with pollutant retention standards (XPX 15203, BS 7258, DIN 12927) Sampling valve for the expelled air allows the user to control the filter ...

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel Information No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt :Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKULX013 LocationBarneveld MakeClextral Specified Features - Double screw extruder Double screw extrudercheck L/D36 Number of heating zones:8 Electric heatingcheck (8 × 1.8 kW = 14.4 kW total) Water coolingcheck (2 m³/h, 4–6 bar, 11 kW) AC-motorcheck (14 kW, 2000 rpm) Screw speed1200 rpm (max) Number of temperature controllers:8 (for each heating zone) Information TypeEV 29/32 High Torque Mach.No.TD 4 004 427-0020 EN Year of construction2002 With switchgearcheck Weight2000 kg Extra SpecificationsLubricating unit Power: 0.3 kW Water flow: 0.13 m³/h Thermic power: 0.75 kW  : Hydraulic unit for barrel drive Power: 0.37 kW Oil capacity (ISO HV 46): 5 L Setting pressure: 187 bar  : Barrel cooling (extra details) Type: Electrovalve Number of cooling areas: 9  : Water pump Manufacturer: Clextral – DKM Type: SPK PP12 Flow: 19 L/h Maximum pressure ...

General SKU309N511 MakeGEA Ahlborn GmbH&Co Sarstedt TypeNT-250 S B-10 No.140/10838 Year of construction2007 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface79.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel (Sandvik 254 SMO) Plate heat exchangerscheck Heating surface79,9 m2 Capacity2x 151,8 Ltr Number of platens87 Connections(4x) dia.250mm Max. temperature60 Degr.C. Information Floorspace1,6x0,9 M Total height2,3 M Weight2322 KGPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU369X882 LocationBarneveld CEcheck MakeBüchi TypeE-916 Pressure Working pressure150 Bar Main Features MaterialGlass Volume0.04 Ltr. Specified Features - Extraction Extractorcheck Capacity10,20 and 40 mL Max. temperature30°C-200°C MaterialGlass Information No.1000054873 Year of construction2010 With switchcheck Floorspace0,70x0,50 m Total height0,75 m Weight98 kg Extra SpecificationsWith laptop, extra bottles, 6 positions, 4 solvent ports, : ExtractionBüchiColumns > ExtractionBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292W1597 MakeTransitherm LocationBarneveld TypeAD2000 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface25m² Tube capacity235 l. Number of tubes:91 Tube diameter25 mm Tube length3700 mm Max. temperature0°C/+300°C Shell capacity210 l. Shell diameter400 mm Shell length3840 mm Max. temperature0°C/+300°C Shell with expansion jointcheck Shell connectionscheck Information No.11043 Year of construction2004 Mounted on legscheck Floorspace0,70 x 0,70 m Total height1,20 mShell and tube heat exchange ...

General SKU252X211 MakeBuss TypeTCS30-17D No.452770 Year of construction1999 Mounted on framecheck Main Features Motor5.5 KW Inlet diameter40 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter30 mm L/D20 Number of heating zones:2 Electric heatingcheck DC-motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Inlet40x30 mm Feeding with hoppercheck Feeding with metering screwcheck Number of temperature controllers:2 Materialcarbon steel ST52 1.0570 Information LocationBarneveld With switchgearcheck Sizes switchgear350x250x230 mm Floorspace1,50x0,65 m Total height1,85 m CEcheckSingle screw extrudersBussExtruders > Single screw extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU219X100 LocationBarneveld MakeXplore Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel Information TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barDouble screw extruders-Extruders > Double screw extrudersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU359W977 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) Information TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU435U1404 LocationBarneveld MakeKrupp werner & pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwcheck brabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 Information TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgearcheck (as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU212T141 MakeSchmidt Bretten LocationBarneveld TypeSigma 65M SAL Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface40 m2 Sizes width485 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4306 (304L) Plate heat exchangerscheck Heating surface40 m² CapacityRoom 1: 128 Ltr., Room 2: 128 Ltr. Number of platens100 Plate sizes485x1650x4 mm Connectionsdia. 109 mm Max. temperature50 °C Information No.61/56709/06 Year of construction1991 Mounted on framecheck Floorspace1,2x0,8 m Total height1,95 m Weight1450 kgPlate heat exchangersSchmidtHeat exchangers > Plate heat exchangersBrand > Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU040F329 TypeSigma 17 RBL No.61/56219/06 Year of construction1990 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface4.4 m2 Size length190 mm Sizes width850 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangers(1x) make Schmidt Bretten GmbH Heating surface4,4 m2 Capacity6,5/6,0 Ltr Number of platens26 Plate sizes± 190x850mm Connections4x dia. 40mm Max. temperature100 Degr. C. Information Floorspace0,6x0,3 M Total height1,1 M Weight170 KG Technical specs Extra informationindicated size is platen sizePlate heat exchangersSchmidtHeat exchangers > Plate heat exchangersBrand > Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

General SKU202X013 LocationBarneveld CEcheck MakeSchott Engineering GmbH / QVF Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure vapour evaporator1 Bar Main Features Surface1.2 m2 Specified Features - Film evaporator MaterialBorosilicate Glass 3.3, Stainless steel 2.4602 (Hastelloy C-22) Film evaporators Falling film evaporatorcheck (with wiper system) Capacity1,2 m² Number of stages:1 Max. temperature150 °C Information TypeSonder DSV300/E Mach.No.95004 / 16128 Year of construction1995 Extra Specifications- Not complete system Volume: 147 l. Film evaporatorsNew arrivalsQVF GlasstechnikColumns > Film evaporatorsNew arrivalsBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

1 of un-used Warner Electric EC650 electro clutch assembly, KHS PN K0090039960, Warner Electric EC-650 clutch CL EC-650-28MM 24V SPECIAL (PN: 5281-111-003 / 5281-271-021), fitted with KHS 47-tooth sprocket PN: K0090039134.

General SKU201P051 MakeAPI Schmidt-Bretten GmbH & Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 degr.C. Information Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...