134,294 used machines on RESALE, but how to find them? Machine Search
Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89
pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg
Electric motor, three-phase motor -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg
Electric motor, three-phase motor -Motors: are unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 3x engines available -Price: per piece -Dimensions: 450/340/H300 -Weight: 50 kg
Electric motor, three-phase motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 9 mm -Construction: B34 -Protection class: IP 44 -Dimensions: 185/112/H145 mm -Weight: 3.5 kg
Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 590/380/H380 mm -Weight: 116 kg
Electric motor, three-phase motor with 2 speeds -Power: 0.48/1.6 kW -Speed: 720/2880 rpm -Shaft: Ø 16 mm -Construction: B5 -Protection class: IP 44 -pole changing -Dimensions: 440/200/H260 mm -Weight: 36 kg
used
Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2020 New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2012 Used, but with new tube bundles. So completely overhauled! Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 600/360/H370 mm -Weight: 116 kg
Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg
Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg
Three-phase motor, electric motor -Engine: unused -Power: 30kW -Speed: 2940 rpm -Protection class: IP 23 - Type: B35 -Shaft: Ø 55 mm - Bolt circle: 350 mm -Number: 2x available -Price per piece -Dimensions: 720/500/H400 mm -Weight: 210kg
Three-phase motor with 2 speeds, electric motor -Motor: is unused -Power: 12.5/18.5 kW -Speed: 970/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -pole changing -Dimensions: 740/390/H450 mm -Weight: 148 kg
Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2900 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 590/420/H380 mm -Weight: 88 kg
Three-phase motor, electric motor -Engine: is unused -Power: 45 kW -Speed: 2945 rpm -Shaft: Ø 60 mm -Height of shaft axis: 200 mm -Design: B35 -Protection class: IP 23 -Dimensions: 780/550/H460 mm -Weight: 250 kg
Three-phase motor, electric motor -Power: 0.8 kW -Speed: 940 rpm -Shaft: Ø 22 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 400/195/H240 mm -Weight: 22 kg
0: 300 mm 0: max./nom: 6.000/5.085 m³/h 0: v.V./nom: 2.950/2.400 Pa pa Filter capacity: 36,2 m² m² weight: ca. 1.300 kg Dimensions (L/W/H): 3.880 x 1.020 x 2.250 mm Dust extractor NE-J 300 3 ton. m. Jet filter regeneration -------------------------------------------------- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7 color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter servi ...
Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg
Electric motor, three-phase motor -Power: 5.0 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 445/330/H250 mm -Weight: 60 kg
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 415/283/H230 mm -Weight: 44 kg
GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...
Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg
electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg
Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 33 kW 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc oven is electrically operated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap guide
Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...
Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...
electric motor, three-phase motor -Power: 5 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Design: B5 -Protection rating: - Price: per piece -Quantity: 1 available -Dimensions: 440/360/H305 mm -Weight: 69 kg
electric motor, three-phase motor -Power: 6.8 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: EX -Dimensions: 490/340/H260 mm -Weight: 73 kg
Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1375 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4x available -Dimensions: 210/122/H190 mm -Weight: 4.25 kg
electric motor, three-phase motor -Power: 3 kW -Speed: 930 rpm -Shaft: Ø 30 mm -Design: B3 -Protection class: IP 44 -Dimensions: 440/340/H320 mm -Weight: 52 kg
Three-phase motor, electric motor -Power: 10 kW -Speed: 1465 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: EX -Number: 6x motors available -Price: per piece -Dimensions: 640/360/H430 mm -Weight: 112 kg
Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock
Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock
Key data: 90 KW, 1485 1/min
TECHNICAL SPECIFICATIONS Manufacturer: ELEKTRA Elektromotoren Dillingen Description: Electric drive motor Type: IEC squirrel cage motor (EN 60034) Power: 90 kW Speed: 1485 1/min Frequency: 50 Hz Standard voltage: 400 V Design: IM B3 Degree of protection: IP 55 Weight: 580 kg SPECIFIC COMMENT - Incl. 1 flywheel extra
Messsystem für Polar 155 EMC Duxon SMD / Measuring System for Polar 155 EMC Duxon SMD Serial-No. 022 490 Messsystem für Polar 155 EMC Duxon SMD Measuring System for Polar 155 EMC Duxon SMD Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
10,000 pcs Eurobox Schäfer EF 3120 Used goods good condition, see pictures Volume 4.2 l Load capacity per crate 15 kg Outer length: 30.0 cm / Inner length: 25.4 cm Outer width: 20.0 cm / Inner width: 15.4 cm Exterior height: 12.0 cm / Interior height: 11.4 cm Color: Black Dimensionally stable and robust Stackable on top of each other Negotiation price: € 2,20 net per piece from stock Larger quantities on request! Goods are in stock. Transportation available on request. Viewing possible at any time by appointment. More information on request. Constantly over 5000 linear metres of pallet racking from numerous manufacturers in stock.
Three-phase motor, electric motor -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 mm -Design: B35 -Protection class: IP 54 -Number: 15 electric motors available -Price: per piece -Weight: 26 kg
Three-phase motor, electric motor -Condition: unused -Power: 2.2 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B5 -Protection class: IP 54 -Number: 14 electric motors available -Price: per piece -Dimensions: 370/260/H260 mm -Weight: 23 kg
Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h Price: per piece -Quantity: 3 available -Weight: 0.2 kg
Electric heat exchanger, swimming pool heating, heat exchanger -400 VAC 26.0 A -Pressure: max. 3 bar -Dimensions: 980/180/H180 mm -Weight: 3.1 kg
Electric motor, three-phase motor -Manufacturer: EMF DORDT, electric motor type 226U 7.5/4 -Power: 0.55kW -Speed: 1395 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 280/220/H170 mm -Weight: 21.3 kg
electric motor, three-phase motor -Manufacturer: elsto, electric motor type AM-TK71BA2 -Power: 0.55 kW -Speed: 2640 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 55 -Dimensions: 300/185/H145 mm -Weight: 8.3 kg
Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
Three-phase motor, electric motor -Manufacturer: Elektrim, electric motor type SI63 4B -Power: 0.18kW -Speed: 1390 rpm -Shaft: Ø 11 x 20 mm -Type: B3/B5 -Number: 4x motor available, 1x broken foot -Price per piece -Dimensions: 205/124/H165 mm -Weight: 4.4 kg/pc.
Key data: 5 mm, 6 mm, 4425 mm
Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944
Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available
Funnel, extraction hood, filling funnel, drip tray -Extraction hood: can also be used as a filling funnel for e.g. conveyor systems -Design: sturdy steel frame, stainless steel funnel sheet -Opening: Ø 200 mm -Dimensions: see photos -Transport dimensions: 2020/910/H300 mm -Weight: 96 kg
electric motor, three-phase motor -Manufacturer: Motek, electric motor type ET564c-4 -Power: 0.12 kW -Speed: 1310 rpm -Shaft: Ø 9 x 20 mm -Design: B14 -Protection class: IP 55 -Dimensions: 190/110/H150 mm -Weight: 3 kg
maximum number of results exceeded
please refine your search
