cat 3520 e used for sale

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts

Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: --- kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

A stainless steel storage tank with an integrated agitator is available. Calibration: 1996, Volume: 2700l, Pressure: non-pressurized, Material: presumably V2A, Bottom outlet: DN50 milk pipe. An on-site inspection is possible.

This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a standard maximum transfer weight of 250 kg and a light axis maximum of 40 kg. The transfer path can be extended up to 2500 mm, accommodating various automation needs. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details.

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

new EcoCut V8 perforated sheet punch consisting of: - Eccentric punch with drive - Infinitely adjustable feed speed - Machine body: RAL 5003 / coarse structure / semi-gloss - Control cabinet: RAL 7035 / coarse structure / semi-gloss - Front panel: RAL 5003 / structure / semi-gloss - EcoOil Lubrication System for EcoCut Punching Machines - Integrated compressed air supply unit for EcoOil lubrication system - Machine table EcoCut for setting up automatic punching machine - Punching oil - standard 1 liter special cutting oil for optimal lubrication of all EcoCut tools - Round hole punching tool 7xd5 Sheet thickness steel :0.7 mm Sheet thickness aluminium :1,0 Sheet thickness front: 0.5 mm Colour: light grey/blue Total power requirement: 16 A Weight: 500 kg Dimensions: 910 x 1120 mm Projection: 280 mm Punching capacity 150 stroke/min Compressed air :2 - 5 bar Steples ...

Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

We are selling here a boiling kettle / pressure cooker from the manufacturer ELRO, type DBGN33-EDS-89.0-0 in a very good used and functional condition. Runs on 400 volts, 23.5 kW, year of construction 2005, 170 litre capacity, digital control, programmable, completely stainless steel, water inlet, workshop tested, immediately ready for use, dimensions W/D/H 140/85/100 cm, others on request.

Condition Unused Brand SEW-Eurodrive Type RX57 DRS71M4 / AND8 Voltage Volt 3 fase 380 volt 400 volt Force KW 0,55 KW Rotational speed RPM 364 RPM Shaft size mm 20 mm Length 40.00cm Width 23.00cm Height 20.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Condition New, old stock Brand SEW Eurodrive Type S37 DRN80M4/BE1/EI7C Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 363 RPM Shaft size mm 20 mm Version Brake Length 51.00cm Width 21.00cm Height 15.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -

Presse à injecter SANDRETTO Micro 30T E SANDRETTO micro 30T E247 Version 2 GEFRAN Interface robot Euromap 12 Boite à eau 4 voies Tableau de prises

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible.

Injection moulding machine Engel DUO 4550/800 BJ 2004

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

Laser Cutting Machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of Make: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting acrylic glass Laser source was renewed 5 years ago

Complete aseptic carton filling line, previously used for the production of aseptic juice products in carton packaging. The line is centred around an Shikoku / Elopak S-PS80HA PURE-PAK aseptic carton filler, designed for 500 ml, 750 ml and 1,000 ml Gable Top Diamond Curve cartons with screw cap. The installation includes a conveyor system with integrated buffering section, as well as three cap applicators (Elopak E-PLA-S30, year 2009, serial numbers 22184, 22185 and 22186) and a cap feeding bunker (Elopak CSFS, year 2009, serial number 28119). Downstream packaging is handled by a flexible cardboard tray packer (Oystar A+F Traypacker TF, year 2011, serial number 320 606 01), suitable for pack configurations of 4×3, 4×2 and 2×3 cartons per tray. The scope of supply further includes control cabinets and cabling, interconnecting piping and valves, as well as instruction manuals and spare  ...

Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

control: Fanuc 31/32 i : 2 chucking diameter: 170 mm swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm length: 2500 mm width: 1900 mm height: 2300 mm weight: 5500 kg turning height: mm turning diameter: mm swing diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wanner Mühlen E45.80 Series No. 140431, 140432 and 140265 Sale due to closure Location

- Optional T1 bending support holders - Optional T2 bending support holders - Motorized Crowning over controlled - Lazer safe CE-Safety - Hydraulic tool clamping 

A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.

Model: ESF400 Year: 2007 Condition: Used Serial Number: 2288 Stock Number: 3295 Belt width: 400 mm Capacity: max 30 strokes/min Hopper: 250 litres Water: max 4 Bar Compressed air: 6 Bar, 300 l/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2250 x 900 x 2350 mm Weight: 780 kg With bridge breaker

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Injection material blowing pressure: 0.5-6bar, Drive: variable gearbox Lenze, Elements: material hose, blow-out nozzle, directional valve, swivel lever, exhaust valve, valve, nozzle, pressure reducer, handwheel, slide gate, control cabinet, control switch, water hose, needle valve, nozzle mixing body. Overhauled by the manufacturer in 2014. With pressure vessel and documentation. An on-site inspection is possible.