cat 3520 e used for sale

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -

Lid labeller with ribbon and thermal transfer printer type ELS 320 TL2-DB1319-SMBS201TT. Good, fully functional condition. Demonstration possible. Support available from the manufacturer.

5.7" touchscreen 640x480 pixels, 1x CAN, 1x USB 2 A, 1x Ethernet, 1x VARAN, microSD still original, buffer cell freshly replaced, was hardly in operation.

Amsonic Hamo ECS40 Closed circuit cleaning system. Hydrocarbon-based solvent as cleaning medium Medium is distilled internally so that high medium quality is always available Process: Spraying, steam, flooding, oscillating, rotating, ultrasonic, vacuum drying. In any order and intensity.

the machine can lap and polish. There are a lot of accessories, including 3 lapping discs, various polishing felts, many masks for samples, many fluids, etc.

Machine Name : Chen Hsong EM120-V Year of Manufacture : 2011 Operating Hours : 58,209 Clamping Force (kN) : 1200 Injection Pressure (bar) : 1700 Cylinder Volume (cm³) : 203 Screw Diameter (mm) : 42 Horizontal Platen Size (mm) : 610 Vertical Platen Size (mm)  : 560 Tie Bar Distance Horizontal (mm) : 410

EREMA RECYCLING LINE for PE PP, Type RM80E, constructed in 2004, including :, loading bel with metal detector, compactor, extruder 85 mm screw Ø, non-stop hhydraulic screenchanger, water ring pelletizer, sacking station, electric cabinet, availability: immediate, conditions: stored

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

sheet width: 1360 mm plate thickness: 06,0 mm distance between columns: mm table width: 455 mm work height max.: 880 mm cutting angle: 1°30 ° rear stop: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 KW, 112 kVA, 400 V

Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ------------------------------------ Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) -------------------------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 m ...

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Engel Screw Barrel Bimetal, new and unused 105 mm diameter LD 22 4550 Unit: 3380 cm3 5550 Unit: 3700 cm3

Inv. Num. : 8736 Type: TURN E65 Producer: EMCO Created: 2018 Parameters: Control system: SIEMENS Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Maximum main spindle power: 22 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Length: 3335 mm Width: 2315 mm Height: 2450 mm Weight: 6500 kg

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible.

Offer 25376 Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 13 mm - Hydr. Cutting angle adjustment - Number of hold-downs 13 pcs - Front angle stop - 4 pieces of front support arms -Mot. Positioning-controlled backgauge 10 - 1000 mm - Cut line illumination - Rear space protection with side grilles + light barrier - E - Footswitch - Drive 400 V / 20 kW - Space requirement approx. W 4350 x H 2100 x D 2200 mm - Weight approx. 8.5 t

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Two cylindrical centrifuges with hinged lids from an unknown manufacturer, each equipped with two electric motors, are available. The centrifuges have fire damage, and the wiring and the hydraulic system must be renewed. An on-site inspection is possible.

Elb 6375 ND Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table : 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Weight: 3300 kg ACCESSORIES: Diamant tools Cooling system: yes

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

Paint System for Engines(Year of Manufacture: 2019) Technical Data: - Footprint: approx. 26m x 9m - 118 skids - Average cycle time: 49 seconds - Process time: 97 minutes (approx. 1.5 hours) - Maximum capacity (3 shifts): approx. 258,000 units/year Main Components: - Loading and unloading area with continuous floor conveyor system - Automatic robot paint booth with dry separation system incl. recirculating air unit - Painting robot Series T2 with hollow wrist - High-performance automatic spray gun LZ-2013 - b+m cap cleaner APRA 12 for automatic spray guns - Manual paint booth with dry separation system - Exhaust systems for manual paint and adhesive spray guns - Fresh air unit - Flash-off zone incl. recirculating air unit - Chiller 1 – recirculating air temperature 40°C - Chiller 2 – recirculating air temperature 20°C - Dehumidifier - Reverse osmosis system and water softener -  ...

Manufacturer: EOS Model: M 100 Year of Manufacture: 2016 Machine Type: Laser-Sinter System / Metal 3D Printer Build platform: Diameter 100 mm x Z 95 mm Technology: DMLS Materials: CoCr, 316L, option available for Ti64 Laser: Yb-fibre laser; 200 W CE Certified: Yes Electrical Specifications: - Voltage: 230 V 1~ / N / PE or 200–240 V 2~ / PE - Full Load Current: 8 A - Net Fuse: 16 A (1~) / 15 A (2~) - Frequency: 50 / 60 Hz - Nominal Power: 1.7 kW - Short Circuit Current Rating: 5 kA Physical Specifications: - Total Weight: 570 kg Condition & Notes: - Machine is fully functioning, but currently missing a filter, which is required for operation. - Last maintenance: 17/08/2024 — the machine has not been used much since. - No accessories included with the sale. - A Concept Laser QM powder sieve can be sold separately if required. Find more here - / Contact us at -

A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible.

bore capacity in steel (diameter): 80 mm arm length: 2000 mm workpiece height max.: ca. 1300 mm borehole diameter: in Stahl 80 mm borehole diameter: in Guss 100 mm threading in St 60: M 68 mm spindle turning speed range: 16 - 1250 U/min Spindle Speed: 32 Stück spindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mm number of feeds: 18 feed: 0,06 - 3,0 mm/U distance spindle/base plate: 480 bis 1800 mm column diameter: 500 mm spindle drive: 11 kW stroke drive: 4 kW total power requirement: 15 kW weight of the machine ca.: 8500 kg base area: 3190 x 1250 x 3600 mm with work table 1200 x 1200 x 720 mm, weight approx. 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 790 mm width: 500 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable and 1 box of magnetic prisms The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 90 mm

A first-class renovated extrusion recycling product EREMA Series Type 1109 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Capacity up to 450 kg/h, available at short notice. Electrics: 50 hearts. Note: The brand-new machine of the latest design costs more than 3 times the available machine. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827

Key data: 300 t, 800 mm

Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Hydraulic Press Emanuel 500 ton press Year of construction: 1976 Dimension table: 2500 x 1900 mm Light max: 1490 mm Light min: 550 mm Slide stroke: 940 mm Cushion stroke: 400 mm Side upright clearance: 900 mm

Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table : 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

For sale is a Coljan labeler Model No.: ETM Year of Make: 2014 Printer Manufacturer: Zebra Type: ZE500-4 Control: Siemens Condition: good For sale is a Coljan labeler Model: ETM. Year of manufacture: 2014 Printer manufacturer: Zebra Type: ZE500-4 Control: Siemens. Condition: good

Manufacturer: Reichenbacher Model: ECO RS3 Year of Manufacture: 2016 Type of Machine : 5 Axis Milling Machine CE Certified: Yes Find more here - / Contact us at -

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

There are over 50 EBG 15 of the company Knapp for sale. Built in 2010. The parts were regularly serviced by Knapp and in-house technicians.

SCREW PRESS EBERHARDT Dimensions of the press: L 1220 x W 1000 x H 1970 mm Number of Molds: 40 Dimensions of the moulds: L 1115 x W 190 x H 105 mm Surface of the moulds electrolytically polished Design: Closed, round sheet metal construction for filling with smoking foil or special paper for drying, smoking and cooking in a single operation. Weight: 400 kg The screw press is easy to operate. The machine is made of stainless steel and acid-resistant components. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

- 3 Guide ways construction - Double V Prima guide ways - Steady rest 600 mm - Steady rest 7800 mm - 4 Chuck 800 mm - Oil Country 160 spindle bore - Optional Larger chuck up to 1500 mm

Manufacturer: ESSEMTEC Model: Convection Reflow Oven Year of Manufacture: 2016 Type of Machine: Reflow oven soldering station Condition: Good Exterior Dimensions: - Width: 24.016 in (61.0 cm) - Depth: 35.827 in (91.0 cm) - Height: 16.929 in (43.0 cm) Weight: 331 lb (150 kg) Find more here - / Contact us at -

A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.

Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.

Relax Web guidance 2-sided Teknek web cleaner 8 x flexographic printing stations 8 x GEW UV Dryer Cooling rollers and coolers included 1 x punching station with Rotometrics Accutrack unit Waste rewinding Sheet station with delivery Rewind EL Scan Inspection Camera 7 x Sets of Printing Cylinder with Magnetic Cylinder

Earth drill suitable for 5-10t., Second hand

A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible.