131,120 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg
Rack Oven Miwe Rollin RI 1.0608-TL Electric A used rack oven Miwe Rollin electric 60x80 built in 2008 with 2 rack trolleys is currently for sale and immediately available in stock. Rack oven Miwe Rollin RI 1.0608-TL 60x80 Electric - Electric rack oven Rotary oven - Miwe Rollin 60/80 - for 58x78cm trays - Optionally with rack trolley - With drive-on ramp - With Miwe control - Nominal consumption : 72.6 kW - Year of construction 2008 More information and pictures on request
Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 320 mm turning height: 180 mm Control: SIEMENS 840 D chucking diameter: 315 mm 0: 4.000 U/min : 1.000 / 280 mm rapid power traverse in X-and Z direction: 60/30 m/min tool turret with 12 work positions: VDI 50 total power requirement: 65 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5,5 x 3,2 x 3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The MAFAC ELBA is a powerful spray cleaning system for the aqueous cleaning and drying of a wide variety of components. It is ideal for the thorough and gentle cleaning of format parts, filling valves, stainless steel containers, trays, sheets, knives, pipes, and fittings – even with complex geometries., The heart of the machine is the patented rotating spray and basket system, which ensures uniform wetting of all component surfaces. The workpieces are introduced into the system either as bulk material or as set material in standard baskets (600 × 400 × 288 mm)., Cleaning takes place in two separate baths:, - Bathroom 1: intensive cleaning to remove product residues, grease and impurities, - Bathroom 2: Rinsing to minimize residues and surface finishing, -, Integrated Fine filtration and a Coalescing oil separator ensure the long-lasting quality of the cleaning media and reduce chemi ...
Combi Steamer Rational SCC101G for 10×1/1 GN, Natural Gas, can be set to LPG, 230 V, 39 kW, 1.7 A, core temperature, steam, fan speed programmable, 1/2 energy, cool down, self-cleaning, and much more, incl. manual, dimensions 85x77x102 cm, suitable substructure 2367
x-travel: 1020 mm y-travel: 520 mm z-travel: 550 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Polar D 56 ECO, Year 2025 Display Program Table Table left Table right Etc. Available: at short term
Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...
Stainless steel machine for industrial filling of thin liquid products by gravity, Solenoid valve dispensers are specially designed for filling thin-liquid products. Partial dosing or full filling (cold or hot filling) can be used. in cans, jars and bottles take place., By using an interchangeable star and a manual height adjustment, a short-term changeover to a different can, jar, or bottle size. The dosing range can be expanded as required using time-controlled valves., 4-digit in-line filler for dosing liquids,, was used for brine for sausages in jars,, Diameter of the filling elements: approx. 20 mm,, power: up to 80 fillings / minute, Dimensions / weight: 2350 mm x 1250 mm x 2200 mm
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg
Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be ground: 3 / 200 mm, Ø min/max to be rectified: 3/200mm, Grinding wheel peripheral speed (m/s): Variable with regulator, Peripheral speed of grinding wheel (m/s): Variable with regulator, Width of regulating grinding wheel: 500 mm, Regulating wheel width: 500 mm, Number of regulating wheel speeds: Infinite, No. of regulating wheel speeds: Infinitas, Min/max. speed of regulating wheel (r.p.m.): 10 / 255 rpm, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Diamond dressing (auto/manual): CNC automatic on 2 grinding wheels, Diamond cutting (auto/manual): Automatic CNC 2 grinding wheels, Diamond speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto/manual): Automatic, Greasing (auto/manual): Automatic, Control type (cnc/manual): CNC, No. of cnc axes: 8, Plongée (auto/manual): Au ...
Grinding wheel dimensions (od x id x width): 508 x 304,8 x 254 mm, Ø min/max to be ground: 1,5 / 120 mm, Width of regulating wheel: 254 mm , Number of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Dimensions of regulating wheel (od x id x width): 305 x 190,5 x 254 mm, Grinding wheel width: 254 mm, Maximum length to grind in plongeé: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Length: 2.300 mm, Width: 1.885 mm, Height: 1,900 mm , Weight: 6,420 kg
Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15 ...
Hydraulic ruler holder, Automatic grinding wheel balancer, Cover, Hydraulic working grinding wheel cover, Equipment AEROEL measurement, Hydraulic table locking, Hoist for 1,000 kg, Refrigeration in electrical cabinet, Panel tire, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min / max to grinding: 3/200 mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, No. of regulating wheel speeds: Infinitas, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Dressing (auto / manual): Automatic - CNC, Diamond cutting (auto/manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto / manual): Automatic ...
Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 kg, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 254 mm, Ø min / max to grinding: 1.5 / 125 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Diamond dressing speed: 225 min1, Infeed (auto / manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 30 kW, Power hydraulic motor: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Weight: 8.375 kg
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min / max to grinding: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum infeed grinding length: 160 mm, Motor power grinding wheelhead: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, High: 1.440 mm, Weight: 3.000 Kg.
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclination of the working grinding head: +/- 5º, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
maximum number of results exceeded
please refine your search
