cat 3520 e used for sale

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 81000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system ...

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm   ...

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

marking: Banderolierer / Bornbinder Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

description: Binder and labelling system for beverage crates on pallets (or similar). The Bornbinder can tie a finished pallet by means of a cord in the upper area. In parallel, a banderole of foil can be attached in the middle area. This provides the basis for the Logopak to apply a label on both sides. The system is completed with a safety system consisting of a safety fence, muting light barrier at the entrance, muting light barrier at the exit. All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your ma ...

description: Modern, automatic high-performance filling lines place high demands on the smooth infeed and outfeed of the containers to be filled. The finely dosed application of aqueous lubricating solutions in exact concentrations according to requirements reduces the frictional resistance between the moving parts, reduces their wear and tear and thus prevents unnecessary production downtimes. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individua ...

dayligth: 420 mm Magnetic field: 420x200 mm grinding length: . mm weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Have different sizes of millstones in stock

Key data: 1280 KW

CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

with UniRobot FMB Control: SIEMENS 828D Circulation over bed: Ø 540 mm Circulation via face slide: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel distances: X= 210, Z= 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% ED) Speed range: 60 – 4200 rpm infinitely variable Max. torque: 192 NM C-axis Rapid Traverse: 1000 rpm TOOL TURRET 12 stations all powered Recording: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Inner cone: MK 4 Robot Cell FMB MH5L-XP With robot Yaskawa Motoman MH 5 L Max. load capacity: 5 kg Max. working radius: 895 mm Weight: 27 kg Workspace: S-axis (rotation): -170° ~ +170° L-axis (forearm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (ha ...

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: Elektronickarte DFD11B, Serial number: 0224906, Systemconfiguration: 08249725, Serial number: 0224906,

Manufacturer: Purete , Type: Einzellackwalze, Year: 2017, Control: Shllin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Shore: ca.40, Durchmesser Auftragswalze mm: ca.240, Dosierwalze verchromt: yes, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: yes, Carriage: yes, Year :2017

Manufacturer: Ernst, Type: Vakuumventilator, Year: 1993, Diameter intake mm: ca 120 mm, Engine power kW: 2,5, Flow rate approx. m3/h: 1500, V-belt drive motor: yes, Outlet side mm: ca.100, Year :1993

Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008

Manufacturer: Eckverbinder Presse pneumatisch,

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Pilz Netzteil C-P-EA4 Ein und Ausgabegerät , Type: C-P-EA4, Model: 24 Entstörfilter, Serial number: 306176,

Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006

Stainless Steel Storage Tank

Manufacturer: Homag, Type: Konvertierungskarte CPU/30/E16 4 x RS, Serial number: 4-086-05-0241, Year: 19.10.1994 K.kraft, Year :19.10.1994 K.kraft

up to 30.000 litres NW 65 Number available: 6 pcs.

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Wood EYE, Year: 2002, Brettbreite min-max mm: 30-90, Brettstärke min-max mm: 20-55, Brettlänge min-max mm: 500-5000, Year :2002

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

This 3-axis Enshu EV450 was manufactured in 2001. It features an X-axis travel of 560 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with tooling for keyway machining and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Enshu EV450 vertical machining center we have for sale. Contact us for further details.

Manufacturer: Heesemann , Type: LSM 8 mit EA Entstaubung, Year: 2002, Monting of the machine: Walze/Quer/lang/lang/Lang/3 X Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1300, Steel roller: 1, Transverse sanding units: 1, Längsschleifaggregate: 4, Bürstenaggregate: 3, Band 1 Leistung kW : ca.35, Belt 1 shoe unit: yes, Band 2 Leistung kW : 17, Band 3 Leistung kW : 17, Band 4 Leistung kW : 17, Struckturieraggregat: Möglich, Vacuum table: yes, Year :2002

We sell 2 x Fujitsu Eternus DX600 S4 Storage Systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all  ...

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Biesse Selco, Type: EBT 120, Year: 2008, Bench top saw: 4400x2200, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Saw blade protrusion: 122, Vorschub Sägewagen : 1-150, Min-max feed programming slider m/min: 100, Saw Blade Diameter mm: 430, Main motor kW: 15, Feeding speed continous adjustable: yes, Scoring Aggregate : 2,2 kW, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

Manufacturer: Stöber, Type: Elektrinikkarte, Model: FAS1015, Serial number: PF6-U1,

Manufacturer: Mattei Schraubenkompressor, Type: ERC 200 AP 200 H 4, Screw compressor: yes, Final sealing pressure bar 1: 9, Driving power kW 1: 37, Volume flow rate m³/h: ca.5, Compressed air min/max bar: 9, Dimensions mm: 2000 X 1000 X 1400, Available: sofort, Preis zzgl. Mwst: 1750,

Manufacturer: Bürkle, Type: Wellenträge Ersatzbürste, Year: ca.1998, FREETEXT1: Träger für Beizvertreiber Maschine, FREETEXT2: mit Schnellspan möglichkeit, Year :ca.1998

Manufacturer: Ernst , Type: AB 1 1300, Year: 1982, Control: no, Compressed air cleaning: yes, Number of units: 2, Units mounted upright: yes, Roll transport: yes, Feeding speed continous adjustable: gekoppelt an Schleifmaschine, rotor jets: Kanal, FREE TEXT: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.Turbine, Year :1982

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1300, Working height: links, Vorschub Transport m/min min - max: yes, Dosierwalze 1 m/min min-max: yes, Year :1995

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,