cat 3520 e used for sale

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 28 mm weight: 543 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Revolver hole punch, with 12 stations, D in mm 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Punching force: 25 t Punching capacity: D 50 in 3.5 mm Sheet thickness: 3 mm Colour: grey Total power requirement :16 A Machine weight: 3500 kg Projection: 700 mm Dimensions: 120 x 80 x 250 mm Punching diameter: 55 mm Machine Number: 18439-464

Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

liter capacity: . l feed pressure: . bar coolant capacity: . l The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are currently offering for sale an almost new 50 kW CHP plant from Tuxhorn. Specifications: - Model: E50SW (Natural Gas Version) - Year of Manufacture : 2022 - Commissioning Date: February 2023 - Operating Hours (BH): 45 - Number of Starts: 59 Special Features: - Equipped with a second exhaust gas SD, reducing exhaust noise to as low as 35 dB(A) for quieter operation. Condition: - Excellent: The unit is in like-new condition with minimal usage. Applications: - Ideal for industrial or commercial operations requiring reliable and efficient combined heat and power. Find more here - / Contact us at -

Refurbished pre-treatment system with a warranty of 12 months. Further technical details on request

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Inv. Num. : 8179 Type: AUTHOR X5 Evo Producer: Morbidelli Created: 2007 Parameters: Axis X: 4400 mm Axis Y: 1350 mm Axis Z: 1090 mm Weight: 5120 kg

Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120

I sell various belt conveyors suitable for industry, for example in wood industry or material manipulation, etc. Belt width 1350mm Lengths 1000-1500-2500-3000-4000mm. All fully fit for work. Available the same.

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Manufacturer: KW Energie Model: Smartblock Year of Manufacture: 2014 Type of Machine: CHP Plant Operating Hours: 17,000 Fuel Type: Natural Gas Engine: Kubota Electrical Output: 22 kW Thermal Output: 50 kW (with condensing boiler use) Fuel Input: 68.4 kW Condition: Fully functional Motor Data - Model: Kubota R24 - Type: Four-Stroke Otto Engine - Cylinder Count: 4 - Displacement: 2.4 Liters - Nominal Speed: 1500 rpm Efficiency Data - Total Efficiency: 105.3% - Electrical Efficiency: 32.2% - Thermal Efficiency: 73.1% - Primary Energy Savings: 34.1% - Primary Energy Factor: 0.36 - Overall Annual Utilization Rate: 105.3% Gas Connection Data - Gas Supply Pressure: 20-50 mbar - Gas Flow Pressure: 16 mbar - Volume Flow (at 0°C, 1013 mbar): 6.8 Nm³/h Temperature Data - Flow Temperature: Max. 85°C - Return Temperature: Max. 65°C - Combustion Air Demand: Min. 75 m³/h - Room A ...

Bausch and Ströbel Fully automatic pressure-sensitive labeling machine type ESF 1015 for self-adhesive labels (adhesive labels) The processing range is 16 -70 mm for the object diameter and 35 -320 mm for the object height

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

travel -x axis: 450 mm travel -y axis: 300 mm travel -z axis: 320 mm travel -u axis: +/- 50 mm travel - v: +/- 50 mm control: MGW-S3 positioning accuracy: +/- 0,015 mm repeatability: +/- 0,015 mm table dimension (L x W): ~ 580 x 730 mm max. size of workpiece LxWxH: ~ 730, 580, 300 mm max. workpiece weight: ~ 800 kg Overall size: ~ 3.100 x 3.100 x 2.300 mm weight of the machine: ~ 3.400 kg Wire Eroding Machine | MAKINO - EU43 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: EU 43 | EU-43 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: square: 110 x 110 mm capacity 90 degrees: flat: 140 x 110 mm capacity 45 degrees: flat: 140 x 90 mm total power requirement: 2,6 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 0,95 x 1,38 x 1,85 m Accessories: 1 used sawblade 350 mmø, coolant - with hydr. clamping of workpiece and hydr. feed of sawblade - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 530 KW, 400 V

MAN 140-730kWe CHP or power generation only application. 0! hours. NEW

Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency

Spiral mixer / dough machine Model: SP 75 ECO sophisticated technology ... already proven many times over! Manual control 2 gears, 2 clocks/ timers Kneading machine for doughs from 6 to 120 kg / 4-75 kg flour Flour dust hood, temperature display Stainless steel boiler and spiral Boiler capacity 175 litres mobile, with brakes DGUV V3 approved Dimensions: 800 x 1190 x 1280/1700 mm, WxDxH Connection 400V, 8.25 kW, 30Amp. 32A-CEE Plug Used machine overhauled with 3 months warranty +Spare parts service Option: Delivery Maintenance contract Service Package E-Box Instruction & Commissioning Visit our large spiral mixer exhibition!

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package Come and visit our bread slicer park!

Deck Oven Electric Oven Year 10/2016 Wiesheu Type: EBO 5-86 S&L Bottom heat and top heat can be controlled individually 5 baking levels each 1 x 600 x 800 mm Oven mobile with brake Upper exhaust hood with steam condenser Stove height top double 135 mm, middle 160 mm, bottom double 135 mm H Bottom proofer for 8 trays 600 x 400 mm Modular construction system Connection 400V, 27.4 kW, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain for DN 40 Dimensions: 1130 x 1060/1300 x 2120 mm, WxDxH Used oven cleaned 3 months warranty Option: Water Pull-off apparrat Loader manual Maintenance contract Delivery & Connection Instruction & Commissioning Visit our large exhibition!

Deck Oven Electric Oven Wiesheu Type: EBO 3-64 M Bottom heat and top heat can be controlled individually 3 baking levels each 1 x 600 x 400 mm Oven mobile with brake Extractor hood with capacitor top Proofer at the bottom Modular construction system Connection 400V, 3.x 6.1 kW, 3 x 16A-CEE plug Water connection 3/4 inch, water drain for DN 40 Dimensions: 930 x 1350 x 1900 mm, WxDxH Used oven cleaned 3 months warranty Option: Water Maintenance contract Instruction & Commissioning More ovens in stock!

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package Many more bread slicers in stock!

Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm

table length: 2000 mm table width: 2000 mm table load: 25 t table rotating: 360 ° Control: total power requirement: 4 kW weight of the machine ca.: 8,2 t dimensions of the machine ca.: 3 x 2,9 x 0,9 m Boring mill table Skoda E25A - Boring mill table Skoda E25A - Dead weight: 8,2t - Max. Clamping weight. 25t - First commissioning: 1996 - Decommissioned and stored since 2014 - All axes are electrically controllable and ready for operation - 360° rotary drilling table ready for operation - Dimensions: see data sheet - Heidenhain rotation measuring system with digital display ready for operation - Heidenhain linear measuring system with digital display ready for operation - Boring mill table fully functional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 180 mm Control: Fanuc 180-T grinding wheel width: 80 (100) mm grinding wheel diameter: 450 mm power capacity - grinding motor: 7,5 kW table speed -stepless-: 10 m/min grinding spindle head - swivable: +5 / -180 ° turning speed range - workpiece spindle: 10 - 800 U/min grinding head swivelling: 0 - 15 ° workpiece weight max.: 120 kg taper in tailstock-quill: MK 4 tailstock quill stroke: 35 mm dressing device: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,75 x 2,25 x 1,80 m band filter unit: 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: max. 320 mm grinding length: 1.500 mm centre height: 160 mm Control: Touch Jones & Shipman between centers: max. 100 kg table:: Traverse Z-Axis: 1.645 mm traversing speed: 0,0001 - 12 m/min swivable: +5 / -5 ° x-axis:: Traverse X-Axis: 260 mm traversing speed: 0,0001 - 6 m/min grinding head:: grinding wheel motor: 7,5 kW cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203,2 mm Tailstock:: Swivel range: -15 / +90 ° turning speed range: 0 - 660 U/min Torque: 27 Nm tool adaptor: MK 3 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,0 m paper band filter: magnetic separator for cooling water: Coolantsystem: Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) -  ...

bore capacity in steel (diameter): 70 mm throat: 420 mm bore stroke: 260 mm thread capacity: 50 M spindle taper MT: 5 MK column diameter: 220 mm bore spindle turning speed range: 51-966 U/min table-size: 600x600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 132-1852 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.