casadei busellato scm used for sale

Serial Number: AH/114081 Power supply: 400 V – 3 phases – 50 Hz Weight: 820 kg Status: In working order Documentation: Record available Auction-ID: A1-44895-36

Wide Belt Sander SCM Sandya 7 S | SCM Group | Sandya 7 S | 2007 | Serial Number: AE7029955 • Power: Unknown (400 V, 3-phase, 50 Hz electrical system) • Condition: Used • Additional Notes: Additional 6 pcs of sanding belts. Rated voltage 400 V, 3~ phase, 50 Hz. Nominal current 65 A. Short-circuit current rating 10 kA. Pneumatic system max pressure 8 bar. Control panel with programmable sanding units. Auction-ID: A7-40551-4

Max. panel width: 900 mm Max. feed: 48 m/min Trees: 1 Engine power: 18.5 kW Auction-ID: A1-45443-20

Auction-ID: A1-41991-9

Fast saw carriage speed max 150m/min; 115mm blade projection; Pusher speed: up to 80m/min; Main blade motor: 7,5kw: Pannel stack height: up to 600mm on the lifting table; Control and software: SCM Maestro Cut: Loading: Air-cushioned table with infeed roller; Grippers: Modular flexcut system (1/S or 1/D) for precise handling; Productivity: fearures like Hi-tronic device for precice blade control, syncronized rip/cross cuts, and optional Zero dust system; Power: 400V, 3phase, 46A; Auction-ID: A1-45636-1

Mounted in containers Auction-ID: A7-45702-38

- 4 trees - Capacity (mm) 240 mm x 120 mm - Input table dimension 2500 mm - Jointer: 5 kw - Right and left spinning top: 7.5 kw - Planer: 7.5 kw - Drive: 1.1kw - Input table dimension 2500 mm - Noise-canceling lips yes - Rack control - Speeds per drive - Up, down, digital planer shaft - Digital left top - SIKO mechanical digital counter with every axis movement and digital on the dashboard - Cutting tools Helical tool holders with carbide inserts - Suction diameter 4 of 120mm and 1 of 150mm - Dimensions 3900 mm x 1450 mm x 1540 mm - CE standard - Special data: Tabletop lubrication insert in the table // Jointer front drive roller with manual retracting // Polyurethane roller in the table at the outlet -motorized - Protector Yes - Amp Power: 55 Auction-ID: A1-45443-86

Machine: SCM NOVA SI 400EP sliding table saw Year: 2018 Sliding trolley: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0-45° Main Blade Speeds: 3000 / 4000 / 5000 RPM Ø scoring blade: 120 mm – 8500 rpm Parallel fence cutting width: 1270 mm Guidance: Manual parallel with micrometer adjustment, metric reading Table: outlet extension + squaring frame Safety: front and side emergency stop, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-45443-13

Machine: SCM MULTIFLEX Angular Center Year: 1990 Saw: Ø400 mm Tenon Shaft: L 320 mm, bore 50 mm Profiling Shaft: L 320 mm, bore 50 mm Glazing bead recovery shaft: Ø200 mm blade Pointing: Pneumatic Stop: revolver Grooved axle: 320 mm Max. working circle: 320 mm Spindle Profiling: 320 mm Max. working length: 2800 mm Workpiece width: min. 30 mm / max. 140 mm Splinter height: max. 115 mm Engine power: 4 PS Speeds: 3000 rpm cut-off saw, 3250 rpm slotted spindle Split spindle stroke: 265 mm Slotted spindle Ø: 50 mm Ø Grooving tools: 350 mm Suction: Ø120 mm x2 Feed speeds: 1.5 - 16 m/min Auction-ID: A1-45443-10

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-45443-72

Machine: Sliding table saw Carriage: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0 - 45° (manual) Main Blade Speeds: 3000 / 4000 / 5000 RPM Incisor: Ø120 mm, 8500 rpm, independent motor Parallel fence cutting width: 1270 mm Guide: manual parallel Ø40 mm with micrometric adjustment Table: outlet extension + squaring frame Safety: emergency stops, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-45443-28

SCM ME35 Edge Banding Machine 8–50 mm panels, 0.4–2 mm edges. Min. length 190 mm, min. width 110 mm. Forward speed 7 m/min. Belt training, edge dresser, pneumatic cutter, 1 kg bin gluing, 2 roller marouflage. Ø125 mm 12000 rpm butt cutter, top/bottom flush, straight scrapers and radius. Siko digital meters. Suction Ø60–80 mm. Total power 19 A. Weight 550 kg. Dimensions 3315 × 1450 × 1300 mm. Auction-ID: A1-45443-65

- Total installed power approx. 20 KW. - Dimensions of the work table 5200 x 1200 mm. - Passage height on panel 320 mm. - X-axis travel: 5330 mm, y-axis travel: 1300 mm, z-axis travel: 300 mm. - Maximum travel speed in x-y-z directions: 45-45-25m/min. - Tool magazine with 10 positions. - Electrospindle: motor power 7.50 KW-max. 18000 rpm, automatic tool change, for ISO 30 tool holders. - Horizontal milling unit with 2 outputs to work in front of and behind the workpiece: motor power 5.50 KW-max. 18000 rpm. - Vertical holes in the x-axis direction: 6. - Vertical holes in the y-axis direction: 4. - Horizontal holes in the x-axis direction: 2+ 2. - Horizontal holes in the y-axis direction: 1 + 1. - NUM 1060 numerical control. - Remote control panel. - 25 suction cups. - BECKER VTLF 250 vacuum pump with a capacity of 250 m³/h. - Tools featured in photos are included. - Op ...

• Serial number AA1/013786 • Working table dimensions 3050 x 1200 mm • Panel passage height 280 mm • Travelling way X-axis: 4420 mm, Y-axis: 1720 mm, Z-axis: 400 mm • Maximum travel speed in the axes direction x-y-z: 105-80-25 m/min • Tool magazine with 12 positions •  Electrospindle: power 11 kW, max, 18000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit with 2,20 kW motor • Vertical drilling spindles in X-axis direction: 5 • 2 heads for horizontal drills • NUM POWER 1040 numerical control • Software Windows / Xilog Plus • RIETSCHLE VTB 250 vacuum pump with capacity 250 m³/h • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-34