carto n used for sale

diameter range 6 mm number of dies 4 number of stations (incl. cut off) 5 max.width across flats 6 mm output - pieces/min 350 cutting length 4 mm thread diamter M2-M3

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500

diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520

diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200

wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, V-flange -Welding flange: DIN 2633 - PN16 -Type: PN16 DN250 / 267 C22.8 34526/1 GER. -Inside diameter: 255 mm -Hole circle O: 355/26 mm -Price per piece -Quantity: 1 pieces -Welding flange: other sizes in stock are available on request -Dimensions: O 405 / H67 mm -Weight: 17 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, -Rexroth: R15104D977/R15104D973 -Shaft: Ø 38 mm -Thread length: 1150 mm -Number: 2x spindles available -Price: complete -Dimensions: 1710/330/H250 mm -Weight: 54 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Block flame cutting nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxyfuel cutting system -Designation: Block nozzle A 40 - 60 mm -Cutting range: 40 - 60 mm -Pressure: 4 - 5 bar -Diameter: 20mm -Length: 64mm -Number: 3 pieces available -Price: complete -Total weight: 0.3kg

Block flame cutting nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxyfuel cutting system -Designation: Block nozzle A 40 - 60 mm -Cutting range: 40 - 60 mm -Pressure: 4 - 5 bar -Diameter: 20mm -Length: 64mm -Number: 3 pieces available -Price: complete -Total weight: 0.3kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

Adjustable traverse, crane traverse, indoor crane, workplace crane, crane hook traverse, load traverse, leveling traverse -Crane traverse: leveling traverse, for transporting a wide variety of loads -Load capacity: 15 t (6x 2.5t) -Load hooks: 6 pieces with sheet metal claws clamping range 0 - 25 mm, see photos -Dimensions: see photo techn. drawing -Dimension.: 10330/330/H680 mm -Own weight: 1700 kg

Bolts, Hex Bolts, Flange Nuts, Hex Nuts, Flange Nuts, Solar Fasteners -Hexagon screws/hex nuts: M 10 stainless steel 242 kg -Hexagon head screws: DIN 933 M10-1.5 x 100 1000 pieces / M10 x 60 2100 pieces. -Hexagonal nut: self-locking type M10 DIN 982 2700 pieces. -Hexagon nut: with flange and locking teeth M10 SW15 Din 6923 800 pieces -Price: complete -Transport dimensions: 1200/800/H230 mm -Total weight: 242 kg

Flange connection, V-flange, Sleeves, double nipples -Sleeves/double nipples: 1 to 3 183 pieces -Type: 20 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H350 mm -Weight: 183 kg

Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg

roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 started box/ total approx. 7000 pieces -Type: 3.0x25 A2 stainless steel -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm -Total weight: 12.7 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller and cage assembly, cylindrical roller and cage assembly, cylindrical roller bearings -Manufacturer: INA, needle bearing with inner ring unused OVP -Type: RNA/NA 4824 -Outer diameter: 150 mm -Inner diameter: 120 mm -Number: 6 needle bearings available -Price: per piece -Bearing dimensions: Ø 150 x 30 mm -Weight: 1.2 kg/piece

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm -Weight: 13.6 kg

Lightbus combo input/output module, input/output module, parallel input/output, analog output, input module, Lightbus analog input module, nput/output module -Manufacturer: tac, input/output module for DIN rail -Type: TAC Xenta 452 -Input voltage: 24 V DC -Number: 3x module available -Price: per piece -Dimensions: 110/90/H80 mm -Weight: 0.3 kg/piece

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 6 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615946 -Cutting range: 60-100 mm -Price/Delivery: complete -Transport dimensions: 120/90/H30 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 5 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615945 -Cutting range: 40-60 mm -Price/Delivery: complete -Transport dimensions: 120/90/H20 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Cutting nozzles: Flame cutting nozzles 56 pieces unused Ovp -Type/Quantity: see photos/parts list -Cutting range: 2 - 250 mm -Price/Delivery: complete -Transport dimensions: 200/150/H50 mm -Weight: 0.8 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 60 - 100 A 3 pieces -Cutting range: 60 - 100 mm -Pressure: 4.5 - 5.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type AB 10-25 mm 3 pieces -Cutting range: 10 - 25 mm -Pressure: 3.0 - 4.0 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 3 - 10 A 6 pieces -Cutting range: 3 - 10 mm -Pressure: 2.5 - 3.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 130/65/H20 mm -Total weight: 0.5 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 25 - 40 A 3 pieces -Cutting range: 25 - 40 mm -Pressure: 3.5 - 4.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 40-60 A 3 pieces -Cutting range: 25 - 40 mm -Pressure: 4.0 - 5.0 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Cutting nozzle, welding torch, heating nozzle, hand arc - piercing torch, gouging torch, gouging nozzle, burner nozzles, cutting nozzles, flame cutting system, burner, oxy-fuel cutting system -Heating nozzles: 49 pieces different sizes Ovp -Type/Quantity: see photos / parts list -Cutting range: mm -Price/Delivery: complete -Transport dimensions: 200/200/H50 mm -Weight: 1.1 kg

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.