carto n used for sale

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

Neri BL400 VTE tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons and 1 vignette/bollini label or similar on the upper face of the carton. Specifcation: - Labelling machine balcony construction stainless steel executed. - Electrical cabinet on machine board, Siemens S7-300 PLC controller with HMI touch screen - Laetus Argus 6012 bar code reader - Easy access from behind to electrical and mechanical parts - Positive transport of cartons with toothed belts. - Upper conveyor belt to keep carton stable during tamper evident seals application - Twin horizontal conveyor belt for products bunching at in-feed. - Mechanical timing device to dispense cartons on the main toothed conveyor belts. - Label dispensing with stepping motor drive. - Automatic work speed synchronization of motors. - Label length self-le ...

NANOFILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

GUSCOR HGM560 / SFGLD560 Part Number 7673532

Equipped for printing flexible packaging, laminates Web width max. 570 mm Print width max. 560 mm Configuration: Unwinding (Ø1000 mm, max. 350 kg) Feeding with Teknek Webclean + 2xCorona 9 printing units for flexographic printing with GEW UV incl. ink pumps on each printing unit UV tower for safe UV curing before lamination 1 MP unit (multi-purpose) for solvent- and water-based 2-component inks, varnishes, etc. incl. viscosity control Inline lamination (dry and wet lamination) Conversion Module Inspection Video 16" single die-cutter for labels with Kocher & Bech GapMaster (NB: width only 16") Retractor unit (Ø1000 mm, max. 350 kg) (on rails De/Relam for unit 1+2, 2 x towers (unwind + return) for cold foil) 17 sleeve sets for plates Everything is in excellent condition 101, 112, 126, 130, 134, 138, 140, 142, 144 17 anilox rollers in excellent condition Additional ink ...

ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...

Electric hot air steamer with direct steam Cooking mode ac (Automatic Cooking): automatic cooking system for recipes from all over the world with a photo showing the dish. Manual cooking with three cooking modes: convection from 30°C to 300°C, steam cooking from 30°C to 130°C, combination of convection and steam from 30°C to 300°C. Programmable operating mode: Cooking processes can be programmed and stored in automatic sequence (up to 15 cycles). Each program can be assigned its own name as well as illustrations and information about the recipe. Clima® - Automatic measurement and control system of the percentage of humidity in the cooking chamber. Fast-Dry® system for rapid dehumidification of the cooking chamber. Functionality Configurable display on demand, bringing the most frequently used programs to the forefront. Automatic start of the cooking process (Ac) wi ...

Stock# U2450-2 Used progressing cavity pump by Netzsch model NM045SH04S24H. Contact parts designed in stainless steel, hygienic design. Inlet has diameter 80 mm, connection with reduction to 50 mm. Outlet has diameter 50 mm. Pump is driven by reducer and el. motor 7.5 kW, 1445 rpm, 400/690 V, 50 Hz. Working screw rotation up to 188 rpm. This size of pump can reach output up to 20 m3/h at rotation 550 rpm. With current drive pump can reach output about 6.8 m3/h. Feeding pressure up to 24 bar. Pump is mounted on mobile stainless steel supporting frame. Included set of hoses: - 1 x dia. 80 mm x L 250 cm. - 1 x dia. 65 mm x L 250 cm - 1 x dia. 35 mm x L 250 cm - 1 x dia. 25 mm x L 250 cm - 1 x dia. 35 mm x L 120 cm Transport dimensions: L 280 cm x W 70 cm x H 95 cm.

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Manufacturer: Pilz Netzteil C-P-EA4 Ein und Ausgabegerät , Type: C-P-EA4, Model: 24 Entstörfilter, Serial number: 306176,

Manufacturer: Nolting, Type: SUR 2500, Year: 1999, Heating power in kW: 2500, Fuel type: Späne, Heating medium water: yes, Year :1999

CONTAINER ANLAGE 90 m2 plant, 6x 20 FT OfficeContainer Building / Office / Living Room, residential container workshop container container plant BJ 2005 - 6x 20 foot container (2.47 m wide, 6.00 m long, 2.90 m high) exterior size - 2.50 m high inner dimension - Residential container office container construction site container, container plant - complete price 6 pieces, excluding assembly - easy assembly - Construction Year 2005

Manufacturer: NUM , Type: 1040 W1, Model: 139241, Year: 2000, Year :2000

Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,

Manufacturer: Indramat Permanent Z Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Model: MDD071-17391, FREE TEXT: U/min 6000, Free text 1: 0,29 Nm/A,

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Motovario Neu, Year: Winkelgetriebe, Motor with gear: 20-1041169961, Ampere 1: 50/0,25 kw, Year :Winkelgetriebe

Manufacturer: Nilfisk Staubsauger, FREETEXT1: 220 Volt, FREETEXT2: 3 Motore a 100 Watt, FREETEXT3: rollbar mit Sauglippe, FREETEXT4: Auffangbehälter,

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Manufacturer: Venyeskob, Type: Rollbahn nicht angetrieben, Length-width mm: 980 X 1400 X 920, FREE TEXT: Maschine wird gereinigt und Lackiert,

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Rippert, Year: ca.1995, Diameter intake mm: 450, Engine power kW: 18,5, Flow rate approx. m3/h: 7500, rotations rpm: 1470, Year :ca.1995

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

Manufacturer: Bohrgetriebe, Stück Bohrgetriebe : 2, Number of drilling spindles: 19, Grid 32 mm: yes, FREE TEXT: Preis pro Stück 750 Euro,

Newmix Atmi life sciences Double jacketed paddle mixer Serial: 15883-005 2011, Stainless pharmaceutical mixer with 500L double jacketed mobile holding vessel, touch screen controls, Min - Max temp 0-90' degrees, jacket volume 6L, 1Ph

Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

Nilpeter FA5 Labelpress - 10 – Colour – 535mm Year of Manufacture: 2010 ________________________________________ Technical Description: Web specifications: • Number of printing units: 10 printing units for UV colour • Printing unit 1 and printing unit 10 UV ink and water-based ink (varnish) possible • Max. web width: 535 mm • Corona: Vetaphone 3.0 KW • Turning cross: yes - flexible on rails • DE - RE Lam Station: printing unit 1 + 2 + 3 + 4 • Double Layer Station: SpilkerCold embossing unit: yes, with rail-based unwinding and rewindingDie cutter: Kocher & Beck / Gap Master System • Register control: P2P/ P2C (manual and automatic electronic register system for each printing unit) • Drying: GEW - UV drying - Rhino system • Hot air drying: printing unit 1 and printing unit 10 • Cooling: Cooling water rollers in each printing unit  ...

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Electrical magnet size 1000 x 300m 110 volt supply IP 66

NILPETER FA2500 – 10-color Year of Manufacture: 2001 ________________________________________ Machine Specifications and Equipment:  10 colours  Max. material width - 280 mm  Max. printing with 260 mm  drying system GEW UV VPC  print repeat range Z60 - Z120 teeth  machine speed - 15 - 150 m/min  Rewinder & Unwinders Type and Reels Diam.  2 x UNWINDER / 1 x REWINDER / 800 mm max  web guides - 2 x ET  video system ET ELSCAN  magnetic cylinders: Z81, Z99, Z105.  Possible additional 3 magnetic cylinders for special price.  print cylinders and gears - sets of 8 pieces: Z82, Z92, Z95, Z97, Z99, Z101, Z105, Z110, Z115  Aniloxes: 1x 1,000 x 3.5 2x 1000 x 4 1x 1000 x 4.5 5x 300 x 6.6 2x 650 x 5.1 Machine is adjusted for MULTI LAYER PEEL OFF LABELS (2 unwinders). Machine is in very good condition

Nut bumper head for attachment to a machine with SK40 tool holder. The tool is suitable for pushing grooves. Manufacturer: ETS Perez 69 VILL.NNE BREVET19015 TYPE127745 How spiral groove works Accessories various groove shock steels M.3, M.4, M.6, M8 T.45, M8 T80, M10 T.80, M10 T80, M12 T.80, M.16 T.82 Special price

Complete control system, CP627, TO32F, NC306, Sigmatek, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in good condition and fully functional. Delivery consists of: 1 pc Sigmatek Rack MB 641 1 pc Sigmatek PT321 1 pc Sigmatek CP627 2 pcs Sigmatek BL100 1 pc Sigmatek NC306 Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital compone ...