133,845 used machines on RESALE, but how to find them? Machine Search
Equipped with multiple spools of twine, twine holder, thread guide. Auction-ID: A1-46064-81
Used and untested; 19012257 Auction-ID: A7-46481-132
Used and unchecked Table size 50 x 54cm 25003092 Auction-ID: A7-46481-20
Chiron FZ18W Magnum, rotopallet, 1999, CNC Siemens 840D, X 630 Y 400 Z 425, tables (2) 850x450mm, 20 tools, ISO 40 / 18kW / 140 Nm, 40m/min, HAWE hydraulics, automatic doors, swarf conveyor, 6 ton, 3,6 x 2,25 x 2,85, machine can be inspected under power in our warehouse, Mimu Machine Tools (Italy)
Used and untested 17013578 Without batteries Auction-ID: A7-46481-6
20012097, without batteries Auction-ID: A7-46481-327
CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.
Used and unchecked Table size 50 x 54cm 18009208 Auction-ID: A7-46481-10
Used and unchecked Table size 50 x 54cm 170164146 Auction-ID: A7-46481-1
Used and untested 23010500 Auction-ID: A7-46481-100
Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm
21032289 Auction-ID: A7-46481-1023
Used and untested 16002526 Without batteries Auction-ID: A7-46481-25
Used and unchecked Table size 50 x 54cm 19022343 Auction-ID: A7-46481-60
Used and untested; 20008332 Auction-ID: A7-46481-45
Used and untested; 18013406; Including 2 cutting discs Auction-ID: A7-46481-122
Thaler 2838 S Skidhole Loader – New Machine General data • Manufacturer: Thaler • Model: 2838 S • Condition: new • Emission standard: Stage V (DOC + DPF) • Operating hours: approx. 18 h • Available: immediately Engine & Power • Yanmar 3-cylinder diesel engine • Power: 28.2 kW / 38 hp • Water-cooled • Speed: 0–18 km/h Powertrain & Chassis • Hydrostatic all-wheel drive • 2-stage with inch pedal • Automotive drive • Planetary axes • Articulated pendulum steering (fully hydraulic) • Self-locking differential 40 % Brake system • Parking brake (drum, cardan shaft) • Service brake (multi-disc brake in oil bath) Hydraulics • Flow rate: max. 51 l/min • Joystick control with floating position • 3rd front control circuit (joystick function) • Pressureless return • Oil-water combi cooler • Hy ...
cutting angle: 90 ° cutting length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used and untested; 21016873; With accessories Auction-ID: A7-46481-1099
WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE WITH COMPLETE AUTOMATION 24000 WORKING HOURS ONLY MACHINE WILL BE AWAILIBLE IMEDIATELY
Used and untested 17016714 With batteries and charger Auction-ID: A7-46481-35
Used and untested; 23025014 Auction-ID: A7-46481-1070
Code: 0013 Brand: COSMEC - ITALY Model: SA/31-10 - CE Standard 3-axis CNC working centre with NESTING table for wood, furniture, panels, plastics, composites and various materials - CE Standard Table NESTING dimensions mm 3100 x 1000 X axis stroke mm 3250 - Y axis stroke mm 1400 - Z axis stroke mm 300 Feed speed X - Y mt/min 56 Feed speed Z mt/min 12 Maximum clearance above worktable mm 250 Milling unit Hp 10,7 (Kw 7,9) - ISO30 attachment at 18000 rpm Automatic tool changer with 6 positions - Inverter power Kw 11 - Rpm 500/18000 Vacuum pump 100 mc/h Numerical control OSAI series 10 Automatic lubrication Side guards Compressed air 8 bar Weight kg 3200
Used and untested; 17024078 Auction-ID: A7-46481-182
Trejon Multiforest MF950 timber trailer with crane V6500 – new machine General data • Manufacturer: Trejon Multiforest • Model: MF950 + crane V6500 • Condition: new • Available: immediately Technical data timber trailer • Payload: approx. 7,000 kg • Total weight: 9,500 kg • Net weight: approx. 1,425 kg • Loading area: approx. 2.15 m² • Tyres: 400/60-15.5 TRAC • Frame steering (45°) • Bogie axle with brake system Technical data crane V6500 • Range: 6.5 m • Lifting torque: approx. 48 kNm • Torque: 13.4 kNm • Operating pressure: 190 bar • Hydraulic consumption: 25–55 l/min Equipment & Features • Forestry crane with mechanical control • Timber grapple + rotator • Stable stanchions (incl. additional stanchions) • Extendable frame • Hydraulic support legs • Air and hydraulic brake • Lighting can ...
Mateng RFMax 280 – Front and rear mulcher (new machine built in 2025) - Suitable for large machines up to 220 hp General data • Machine type: Front / rear mulcher • Manufacturer: Mateng • Model: RFMax 280 • Year of construction: 2025 • Working width: 2,750 mm • Overall width: approx. 2,995 mm • Weight: approx. 1,560 kg • Condition: New machine Technical equipment • Suitable for tractors from approx. 120–220 hp • Front and rear mounting possible • Hydraulic side shift (left 506 mm / right 614 mm) • PTO drive: 1,000 rpm • CMR gearbox with freewheel • Automatic belt tensioning • 5 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,192 rpm • Rotor Ø: 203 mm (with flail Ø 455 mm) • 24 mallets, staggered • Flail weight: approx. 1.2 kg • Hammer bolt M16 • Adjustable back-up roller Ø 245 ...
Thaler 3448 T DPF Telehandler – New Machine General data • Manufacturer: Thaler • Model: 3448 T DPF • Condition: new • Emission standard: Stage V (DOC + DPF) • Available: immediately Engine & Power • Yanmar 4-cylinder diesel engine • Power: 35.4 kW / 48 hp • Speed: 0–20 km/h (optional 25 km/h) Powertrain & Chassis • Hydrostatic all-wheel drive (automotive) • 2-stage with inch pedal • Planetary axes • Articulated steering • Self-locking differential 40 % • Swing axle at the rear (more stability) Hydraulics • Flow rate: approx. 51 l/min • Joystick control with floating position • 3rd + 4th front control circuit • Electric telescopic arm • Pressureless return • Hydraulic device locking (Thaler + Euro mount) Equipment & Features • Cabin with heating • Air-sprung comfort seat with heated ...
Key data: 835 mm, 510 mm, 510 mm
Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.
Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle
Used and untested; 16009886 Auction-ID: A7-46481-1026
Numbering boxes brand SUNUM for Heidelberg GTO; 7 pieces. 4 pieces work forward and 3 pieces reverse. Can ship world-wide.
20012164, without batteries Auction-ID: A7-46481-328
Mateng Dynamic 220 – rear and side mulcher (new machine built in 2025) General data • Machine type: rear / side mulcher • Manufacturer: Mateng • Model: Dynamic 220 • Year of construction: 2025 • Working width: 2,200 mm • Weight: approx. 832 kg • Condition: New machine Technical equipment • Suitable for tractors of approx. 80–120 hp • Tilt angle: approx. -50° to +90° • Hydraulic side shift • Displacement: left 672 mm / right 1,528 mm • PTO: 540 rpm • CMR gearbox with freewheel • 4 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,047 rpm • Rotor Ø: 168 mm (with flail Ø 436 mm) • 24 mallets, staggered • Flail weight: approx. 1.37 kg • Hammer bolt M16 • Adjustable back-up roller Ø 168 mm • Two rows of counter blades for optimal shredding • Collision protection • Robust cons ...
maximum number of results exceeded
please refine your search
10 € 
