129,060 used machines on RESALE, but how to find them? Machine Search
Two cross folding systems MB Bäuerle are available. 1.1) Buckle folding machine Bäuerle prestigeFOLD NET 52, max. sheet format: 520mm/850mm, min. sheet format: 100mm/120mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 52/0/4-40. 1.2) Feeder FSA 52, stack capacity: 4500 sheets, max. speed: 150m/min. 1.3) Vertical sheet small format delivery SKM 36 NET, max. inlet width: 360mm. 2.1) Buckle folding machine Bäuerle prestigeFOLD NET 38, configuration: 6/4-FSA, max. sheet format: 380mm/750mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 38/0/4, module: PFNet 38/6 FSA. Including various spare parts. Documentation available. An on-site inspection is possible.
General SKU004F006 MakeVötsch Industrietechnik GmbH TypeNTU 60/40/60-S-GMP 400 C No.59526004580010 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Volume144 Ltr. Max.temp.400 °C Specified Features - Drying oven Drying ovenwith outlet-air heat exchange system (1x) Max. temperature400 Degr. C. Number of compartments:1 Capacity144 Ltr Internal width600mm Internal depth600mm Internal height400mm Electric heatingcheck Electric capacity21,6 KW, 400 Volt Number of doors:1 With fan(44 m3/Min) Motor1,5 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information With switchcheck Floorspace2,1x1,0 M Total height2,2 MDiscountDrying ovensVötschDiscountDryers > Drying ovensBrand > Vötsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 710 KW
Nei pebbles Ltd electrical machine cage rotor induction motor output 710 KW machine designed for heavy-duty applications, often utilized for driving compressors, fans, or pumps
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...
Resistance welding machine for structural steel wires from coil.
General SKU029F122 MakeEMDE Industrie- Technik Nassau TypeKH-300 + MDRD-120 + C-250 No.A 106.0212 Year of construction2006 Mounted in framecheck With 2 containers (dia. 800mm), type C-250 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillers Lifting + tilting machine/Container emptying station/vibro feeder (1x) Powder filler/Container emptying station/vibro feeder (1x) Dosingscale 15 KG Capacity250 Ltr. Dosing with vibro feederscheck With motor0,55 KW, 230/400 Volt Information LocationBarneveld Mounted on wheelscheck With switchgearWith vibro feeder type MDRD-120 Floorspace2,1x2,0 m Total height2,1 m Weight920 kg Extra SpecificationsContainers in stainless steel 1.4301 (304)DiscountPowder fillersEmde NassauDiscountPackaging machines > Powder fillersBrand > Emde Nassau What you can expect from ...
Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)
Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!
Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER
Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5
Insulated whirlpool for outdoor installation., Additional title: Trub removal, Capacity: 18200 l, Volume net: 15000 l , Height wort: 1700 mm , Height cylinder: 2000 mm, Material: Stainless steel 1.4301 (AISI 304), Position: outdoor, Base construction: cylindrical vessel, Features: insulation (100 mm mineral wool)
Manufacturer: NeoDen Model: IN6 Year of Manufacture: Type of Machine : Reflow Oven Key Technical Specifications - Power supply: 110/220 VAC, 1-phase (household power compatible) - Rated power: 2000 W maximum - Heating zones: 6 total (3 upper / 3 lower) - Heating type: aluminum alloy heating plate with nichrome wire - Cooling zones: 1, with bottom cooling fans at offload section - Conveyor speed: 5 to 30 cm/min (2 to 12 inch/min) - Maximum PCB height: 26 mm - Soldering width: 250 mm - Process chamber length: 680 mm (26.8 inch) - Temperature range: room temperature up to 300 degrees C - Temperature control accuracy: +/- 0.2 degrees C - PCB temperature distribution deviation: +/- 1 degree C - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Machine dimensions: 1020 x 507 x 350 mm (L x W x H) - Packing size: 112 x 62 x 56 cm - Net weight: 49 kg - Gr ...
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 3 live positions: yes number of c-axes: 3 number of y-axes: 3 WORKING RANGE TURNING turning diameter (max): 170 mm bar diameter (max): 45 mm worpiece length max.: 588 mm MAIN SPINDLE spindle revolutions (max): 6000 /min spindle bore diameter: 42 mm spindle positioning: 0.001 ° c-axis: yes COUNTER SPINDLE spindle revolutions (max): 6000 /min spindle positioning: 0.001 ° c-axis: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3400 mm space requirements -front/back-: 2000 mm total height: 1900 mm total weight approx.: 8000 kg
- Producer Heesemann - Type MFA 8, Quer/Längs/Längs/Bürste - Year of construction 1998 - 1. Unit - Cross belt - Electronic sanding beam CSD - Fins belt - Belt speed 1. Stufe 0,6-12 m/s - 2. Stufe 24 m/s - Measure sanding belt 4800 x 150 mm - Motor power 11/17 kW - 2. Unit - Length belt - Electronic sanding beam CSD - Fins belt - Belt speed 3,5/10 m/s und 20 m/s - Measure sanding belt 2620 x 1350 mm - Motor power 4,5/12/17 kW - 3. Unit - Length belt - Electronic sanding beam CSD - Distance follower roller 32 mm - Dedusting brush 1 Stk. - Touchscreen with graphic design - Table length extension - Aggregate height adjustment - Electric height adjustment - Feed speed infinitely adjustable 3 - 15 m/min - Vacuum transport belt - Connecting piece 4x180 + 1x146 mm - Air speed main collector 20 m/s - Consumption of compressed air ~ 134,5 + 72,0 m³/h - Length 2.385 mm - Width 2.300 mm ...
Nakamura NTJ-100Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mmTurning length : 678 mm____________Description:In General:Year of manufacture:2015Control system:Fanuc i 31-BTurning diameter:175 mmMax. turning length:678 mmSpindle:Technology:Motorised spindleSpeed:4,500 rpmPower:11 kWBar capacity:65 mmC-axis:0.001°Clamping cylinder:Hollow clamping cylinderChuck:Collet chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmPower:7.5 kWBar capacity:51 mmC-axis:0.001°Clamping cylinder:Semi-hollow clamping cylinderChuck:Collet chuckTool carrier I (X/Y/Z/B):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:330 mmY-axis:80 mm (+/- 40 mm)Z-axis:1,040 mmB-axis:182° (+/- 91°)Tool carrier II (X/Y/Z):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:127 mmY-axis:65 mm (+/- 32.5 mm)Z-axis:678 ...
A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible.
Size: Equipments: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)
turning diameter: 600 mm turning length: 1250 mm control: Siemens 840D radial face slide travel: 320 mm turning speed range: 5-3.000 U/min Number of tools: 8 St. steady: coolant device with chip conveyor: total power requirement: 42 kva weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6x2,15x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 kN, 40 mm
Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm
Key data: 2880 KW
Natural Gas Generator Niigata 2 x 2880 kW / 60 Hz with Auxiliaries Two well maintained natural gas generators manufactured by Niigata in 2005, electrical capacity 2 x 2880 kW / 60 Hz. The plant was operated till 2020 and maintained according to Niigata maintenance instruction, last scheduled 30000 hour maintenance for both engines was carried out in April 2019. Plant was professionally dismantled on 2022 and total 31000 operating hours with mechanical and electrical indoor auxiliaries. Plant control system, mechanical indoor auxiliaries, HV breakers and MCC cabinets belongs to the scope of supply Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets 2 pcs Running hours approx. 31100 – still in operation Voltage 3450V / 60 Hz Frequency 60Hz Alternator ...
Key data: 5760 KW, 3450 V
Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets ...
Key data: 1068 KW, 1335 kVA, 400 V
For sale is a Newage generator with the serial number A12H327489. This generator was coupled with a Jenbacher 320 engine with the design number O988. The generator delivers an output of 1335 kVA at an output voltage of 400 V. It was manufactured in 2012. The price for this powerful and hardly used generator is 7,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece
Nagel Citoborma 270 B, - 2-spindle paper drilling machine, - 380V model, - Floor model
Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI. Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5
Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - / Contact us at -
An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390
Nowicki vacuum tumbler, type: MA-1000 PS, factory number: 22003058, year of construction: 2003, 400 V, 3 Ph, 2.3 kW, weight: 632 kg, volume tumbler: 1000 liter, Busch vacuum pump, type: RC 0021 B 3Z3 APXX, year of construction: 1997, capacity: 21 m³ per hour, dimensions: 2550 mm x 1350 mm x 1620 mm.
Nuaire high capacity blower, dimensions: ø 800 mm x 350 mm.
2 Nijal vacuum filling machine with lifter for 200 liter meat bins, model: TENOR F 220. Including s/s tool trolley with rotors and s/s mobile mesh belt.
Key data: 6020 mm, 1 mm
used hydraulic Jorns long bending machine, with 5 wide stand units, with SN 1.25 motor scissors, bending beam width 16mm, with emergency/stop rail, foot switch, Control on the swivel bracket OP, with resettable sheet metal supports in the lower beam Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Projection 1000 mm Total power requirement 16 A Dimensions approx. 6800 x 1650 mm Weight 3200 kg Upper beam stroke (opening width) 200 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Color: Blue Machine number 9453-07
Key data: 4000 KW, 11000 V
Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...
Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats. It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...
Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included - ...
Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weight: ...
Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -
The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...
Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa ...
Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V ...
NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...
Manufacturer: NeoDen Model: YS350 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 400x240 mm - Printing area: 500x320 mm - PCB fixed system: pin positioning - Frame size: L 550-650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 230 kg - Gross weight: 280 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine throt ...
Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...
Manufacturer: NeoDen Model: YS600 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 600x240 mm - Printing area: 700x320 mm - PCB fixed system: pin positioning - Frame size: L 750-850 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 265 kg - Gross weight: 310 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine throt ...
The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thicknes ...
Manufacturer: NeoDen Model: YS1200 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 1200x240 mm - Printing area: 1300x320 mm - PCB fixed system: pin positioning - Frame size: L 1550-1650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 1600x700x1700 mm (L x W x H) - Net weight: 300 kg - Gross weight: 350 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine ...
The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...
maximum number of results exceeded
please refine your search
4.500 € 
