carto n used for sale

NERI DL400 type V duplex vignette labeller, for top labelling of cartons or similar. Fitted with two labelling heads, carton size range from 80 x 30mm (W x L)) to 180 x 120mm (W x L). Output up to 100 cartons per minute. All stainless steel construction.

Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

Make: Küba Type: CAV N10-1X1B Pipe capacity: 0.1 litres Price on request

Contact manometer NG100 0-4 bar

We offer you 10 used safety pins from the manufacturer Nedcon for sale. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Nedcon Type: AS Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.022 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Angle gearboxes / gearboxes NOSEN type. RN-4 M-I-LR-1:1 T shape / 1 shaft input - 2 wave outputs -Shaft diameter 19 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 10 kg -Max. Of torque at 1500 rpm: 31.9 NM used from inventory.

Angle gearboxes / gearboxes NOSEN type. RN-6 M-I-LR-1/1 T shape / 1 shaft input, 2 outputs of waves -Shaft diameter 25 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 23 kg -Max. Of torque at 1500 rpm: 96 NM

Stainless steel execution Infeed height: 400 mm Spout height: 1700 mm With drive motor With plastic mats chain Mobile on castors

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

50 lfm pallet rack Nedcon New, see pictures! A top shelving system from the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg Negotiation price: € 8.750,-- net from stock Offer consists of: + 19 st. frame pre-assembled, depth 110 cm, height 7 m +144 st. girder, length 2.7 m, 3050 kg load/compartment +288 St. Suspension fuses + 38 concrete anchors Payload signs documents etc. are self-evident. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Carrier orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and  ...