127,295 used machines on RESALE, but how to find them? Machine Search
Maximum temperature: 650°C Interior dimensions: Width 650 mm Depth 750 mm Height 600 mm electr. Connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm
turning length: 3.000 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5.000 mm y-travel: 3.100 mm z-travel: 1.200 mm Control: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mm T-slots: 11 T - slots - width: 22 mm table weight: 30.000 Kg rapid traverse X-axis: 20.000 mm/min rapid motion - y-axis: 30.000 mm/min number of spindle speeds: 6.000 U/min/rpm Spindle power: 32 kW taper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mm Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
On behalf of a customer, we are selling an EVO-tech EL-140 3D printer. The device was used as a dealer demo machine. Number of print jobs: 141, material used: approximately 2100m of filament. The machine is in perfect condition., Installation space in mm (x/y/z): 570 x 450 x 570 mm, Print volume: 140 liters, temperature of the print bed: max. 160°C, temperature pressure nozzles: max. 420°C, print volume: 140 liters, Automatic calibration: Yes: XYZ, Closed Loop Axis System: Yes, Temperature build chamber: max. 100°C, temperature of the construction chamber: max. 100°C, Filament sensor: Yes, Material recognition: Yes, Filament drying: Yes, Independent nozzles: Yes, 2 pieces, Size of the filament spools: 1KG to 10KG, Nozzle cleaning station: Yes, webcam: Yes, Copy mode: Yes, water cooling: Yes, filament sensor: Yes, Magnetic positioning: Yes, material recognition: Yes, filament ...
Aircooled chiller Climaveneta NECS R B 3218 746 kW Cooling capacity: 746 kW / 212.12 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module. Recuperation Refrigerant circuit: 4 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. COPELAND ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 12 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM160B14S3/3150 E3 Dimensions: 7.43x2.26x2.45 m Weight: 6850 kg Working hours: 6668/6668/6545/6791/6732/6732/6732/6732 h. Condition: Good
Aircooled chiller/Heat pump CLIMAVENETA NECS N B S 0512 127 kW / 144 kW Cooling capacity: 127 kW / 36.11 tons (12/7 — 35°C) Heating capacity: 144 kW / 40.95 tons (40/45 —7°C) Year of manufacture: 2012 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. ( 5 pcs. frequency inverter driven) Dimensions: 3.25x1.12x1.62 m. Weight: 1030 kg Working hours: 1985/1985 h. Condition: Good
Paper drill Citoborma 480 AB, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
- Doubled support carriage - CNC controlled measuring and correction probe - Chip conveyor - internal and external clamping jaws (wheel clamp in and out) - overhauling cost 850k EUR - Under power free 02.2026
- 4 Chuck 1400 mm - Steady rest 3 units Ø 100-1050 - Roller steady open 2 units Ø 1120 - KNOLL Chip conveyor 2022 - Boring bar Ø 260 x 3500 mm - Boring bar Ø 200 x 1500 mm - Boring bar Ø 150 x 1100 mm
- Fixed steady rest 4 units - Fixed table dresser for stone dressing - Face plate head and rear support ca 800 mm - Stone grinding speed 27-24 M/Sec - Coolant and filtration system - In feed stone 0,0025 mm - Acurite Dro with Heidenhain scales - Maximum segment wheel 1600 mm
- Grinded clamps 0,02 mm - Clamp force 2 T - Modulare setup - Flexibel& Compatibel
used
Paper drilling machine Citoborma 490 base year 2018 and Vario: year 2021, 4 spindle, height-adjustable table, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Inv. Num. : 8681 Type: S396/65 Producer: NABERTHERM Generated: Parameters: Power consumption: 24 kW Maximum temperature: 650 C Internal dimensions of the machine (LxWxH): 600 x 600 x 1100 mm Machine dimensions: 780 x 780 x 1730 mm Switching and control system with program controller
Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts
Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display
turning length: 1.300 mm spindle diameter: 120 mm spindle bore: 38 mm control: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours
Key data: 200 mm
Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm
Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422
Dishwasher Winterhalter GS 650 Energy+ Winterhalter Model: GS 650 - Floor-standing machine, stainless steel version - 3 washing programs - Powerful pump - 1 washing basket - Rinse Pump & Cleaner Pump large tank with Energy+ heat exchanger Connection 400 V, 32A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Water Delivery Maintenance contract Service Package E-Box for more safety Instruction & Commissioning
Aircooled chiller CLIMAVENETA NX2 G06 Y 0294T 270 KW Cooling capacity: 270 kW / 76.77 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 4 pcs. DANFOSS DSH295A4APC (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3 Dimensions; 4.34x2.25x2.29 m. Weight: 2580 kg. Working hours: 6233/6233/6233/6233 h. Condition: Good
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
For sale is an Evotech EL 102, an industrial FDM/FFF 3D printer made in Austria., The printer is suitable for prototype construction, small-scale production, and functional components with high quality requirements., Equipment & Special Features, - Stable all-metal construction for precise continuous operation, - Large, enclosed construction volume for demanding materials, - Dual extruder for multi-material and support structures, - Industrial-grade mechanics and controls, - Low vibration, quiet operation, - Ideal for prototype construction, small series and research/development, Condition & Availability, - Used and well maintained, - Functional, ready to use, - Operating hours: Information follows, - Viewing & test printing possible by arrangement, - Loading by forklift possible, transport can be organized within a radius of 350 km, Construction volume: approx. 260 �� 350 ï¿ ...
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 800 to PRESS TABLE table surface (left-right): 2600 mm table surface (front-back): 2000 mm height above floor level: 540 mm SLIDE stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 460 mm/s working velocity min.: 25 mm/s working velocity max.: 44 mm/s return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS total power consumption: 180 kW DIMENSIONS / WEIGHTS total weight approx.: 95000 kg ATTACHMENTS (PRESSES) press automation: yes gripper transfer system: yes acc. to actual accident protection regulation: yes European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnac ...
Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.
Ref. no.: 18565 Hersteller: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005
WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA
turning diameter: 190 mm turning length: 620 mm control: Fanuc Series 18i-TB total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5350X3350x2395 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 4 x 204 l Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 530 mm z-travel: 510 mm Control: M 730 BM MAPPS IV Main spindle:: max. spindle speed: 10.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm work table:: table surface area: 900 x 600 mm max. table load: 800 kg T-slots: 6x 18 x 100 mm distance spindle /table: 150 - 660 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 150 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: ca. 1,3 sec change-time chip to chip: ca. 3,45 sec feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 30.000 mm/min Tipp feed: 0 - 5.000 : 20 mm/min total power requirement: 30 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Documents: Chip conveyor: ...
DMG MORI NEF 400 CNC turning center was built in 2009 in Poland by FAMOT Pleszew S.A. The machine, distinguished by its compact design and high efficiency, is used for precision machining of workpieces with a maximum diameter of 350 mm. The machining process is performed inside a fully illuminated workspace by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. The extremely rigid design eliminates any vibration and oscillation, ensuring maximum process stability during even the most intense challenges. All these features make the DMG NEF 400 the best choice for any industrial plant. The GILDEMEISTER NEF 400 CNC lathe was used for prototyping and worked for a total of 6492 hours. The offer also includes extensive equipment, consisting of, among others, an advanced HEIDENHAIN CNC control, driven tools and a chip conveyor. Technical specificatio ...
x-travel: 870 mm y-travel: 370 mm z-travel: 400 mm table-size: 310 x 1370 mm distance vertical spindle / table: 50 - 450 mm feed - longitudinal/cross: 20 - 800 mm/min : 9 - 355 mm/min rapid traverse longitudinal and cross: 3000 / 1375 mm/min spindle taper: SK 50 spindle turning speed range: 40 - 1750 U/min spindle speed:: 12 Stück total power requirement: 5,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank
DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM
Tennant T350 Nano Clean ec-H2O Manufacturer: Tennant Model No.: T350 Type: Scrubber Dryer Technology: ec-H2O NanoClean Working width: 500 or 600 mm Fresh water tank: 53 litres Dirty water tank: 70 litres Brush speed: 215 rpm Hours: 260 Condition: used Location: Bremen
used
Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar
turning diameter: max. 900 mm turning length: 3100 mm swing diameter over bed slide: . mm Turning diameter over slide: 640 mm Turning diameter over crank: 1100 mm spindle diameter: 110 mm speed: 7-800 (24x) workpiece weight: . kg Holder Multifix: ja total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m : 50 voltage: 380 V Multi fix toolpost Rapid traverse 2-Axis D.R.O. 3-jaw chuck diameter: 400 mm 4-jaw chuck diameter: 800 mm Fixed steady rest diameter: 580 and 360 mm Following steady rest diameter: 230 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are in ...
Control Nakamura-Tome NT Smart X Travel X1/X2 axis: 135 mm Y1 axle: 62 mm Z1/Z2 axle: 503 mm W-axis: 865 mm Max. turning diameter Fjbrsxmuz Tj U S Dvmopn 190 mm Standard Turning Diameter 210 mm Max. turning length 503 mm Main spindle Max. spindle speed: 6,000 rpm Sub-spindle Max. spindle speed: 6,000 rpm Tool turret 2 pcs 12-speed revolver (24 stations index) 2 x 12 driven tool positions Drive power milling drive: 7.1/2.2 kW Max. speed driven tools 6,000 rpm More options Precast gripper type G incl. conveyor belt Part catcher type A Conveyor Bar loading magazine FMB Turbo 5-65/3200A, year 2019
For MUSSANA Whipped Cream Pump for Older Models NEW Unused
Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland
Key data: 610 mm, 1540 mm
Stock number: 3998 CNC LATHE Manufacturer: MORI SEIKI , Type: NTX 2000 / 1500 SZ MAPPS-IV CNC Year of Make: 2013 Specifications: Max. circumferential diameter 610 mm dia. Turning length 1540 mm Main spindle 4000 RPM - 26 kw Hole through drawing pipe 80 mm dia. Spindle bore 91 mm dia. C axis - head spindle movement 0.001 degrees X axis movement 675 mm Z ash movement 1562 mm Y axis +/- 125 mm mm B axis movement 120 degree - 0.0001 degree B axis spindle speed 12000 rpm B axis spindle effect 18.5 Sub-spindle 5000 RPM - 22 Kw Control MAPPS IV (MX711 ) 5 axis Fabr. Accessories: ATC Tool magazine with 76 stations Hydr. Chuck main spindle Kitagawa BB-210 - 250 mm/dia mm dia Hydr. Chuck Subspindle Kitagawa BB-208 - 200 mm/dia mm dia Car Door Chip conveyance. High pressure coolant pump 70 bar Measuring System Renishaw S ...
Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE (SIMATIC PANEL TOUCH SCREEN) control Year of Make: 2003 Spindle bore: 52 mm Center width: 750 mm Circumference Ø over bed : 320 mm Circulation O over face slide: 150 mm Face travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix tool holder with 2 inserts 3 jaw chuck SCHUNK ROTA plus 0 200 mm 2 set of soft top jaws Coolant Setup Chip rinsing gun 6 pcs. machine shoes Operating instructions The machine is in very good condition
A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h ...
Blister packaging system consisting of: Horn + Noack N 916 thermoforming blister machine and Uhlmann C 130 folding carton cartoning machine N 916 thermoforming blister machine: Set up for aluminium/PVC/PVDC/PP, 1-lane Roller sealing Film width max. 160 mm Film feed max. 138 m Drawing depth max. 12 mm Punching dimensions max. 150 x 136 mm Output max. 70 moulding cycles/min, max. 200 punching cycles/min Mould film Ø 700 mm, cover film Ø 250 mm 3 product feeders: aligned feeder, roller feeder, brush box with separate control (new in 2012) Single-colour printing unit for cover film Hapa H-216-C, built in 2000, incomplete (without technical inspection) Coding station with embossing printing unit Perforating station New in 2012: Laetus TLU LED PAL LXS MR colour camera with NAVIGATOR software and POLYPHEM wt evaluation unit/touchscreen fo ...
maximum number of results exceeded
please refine your search
