126,609 used machines on RESALE, but how to find them? Machine Search
NEW - Electronics 230V - from spare parts warehouse.
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg
NEW - Electronics 230V from spare parts warehouse.
Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed
150 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6 m Depth 110 cm, blue Beam length 2.7 m orange Rack with ballast /compartment 3050 kg Negotiation price: € 18.990,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 110 cm, height 6 m +216 pcs. beam, length 2.7 m, 3050 kg ballast/compartment +432 pcs. Suspension locks +220 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Key data: 320 mm, 750 mm
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
Nilfisk BA551D Floor scrubber Walk behind scrubber dryer, perfect for floor cleaning,
Position transducer, actuator for valves, valve drive, actuator, servomotor -Type: T 100 a 502 -Weight: 0.3 kg
Computer cabinet, server cabinet, control cabinet, network server cabinet, computer enclosure -Manufacturer: apra net -double opening -Dimensions: 600/600/H600 mm -Weight: 54 kg
Inv. Num. : 7310 Type: KX3 Producer: Numco Generated:- Parameters: Control system: MACH 3 Maximum bore: 20 mm Work table length: 450 mm Work table width: 160 mm Maximum vertical spindle speed: 5000 1/min X-axis travel: 300 mm Y-axis travel: 150 mm Z-axis travel: 290 mm Cone: MK3 Machine height: 1750 mm Machine length: 800 mm Machine width: 780 mm Machine weight: 220 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 8x available -Weight: 2.2 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: 300 mm -Width: 18 mm -Price: per piece -Quantity: 1 piece available -Weight: 1.9 kg
Nilfisk CTS40-LZ22 Industrial vacuum cleaner 2008, industrial vac cleaner, 4Kw rated, mobile, 3Ph
Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg
Key data: 13000 , 4200 , 110
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176
Heating hose, adhesive melter, gluing machine, hot glue machine, industrial hot glue gun -Type: FE-NW-2.4-8-N10 -Connection: 230 V 50 Hz 310 W -Heating capacity: 200 °C -Weight: 2.5 kg
Pneumatic pressure switches Type: Nautilus -Pressure: -1 to 0.8 bar -Operating voltage: 240 VDC -Quantity: 3 pieces available - Price: per piece -Condition: Stock item, unused -Weight: 1 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 250 mm -Width: 6 mm Price: per piece -Quantity: 40x available -Weight: 0.6 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 250 mm -Width: 8 mm Price: per piece -Quantity: 50x available -Weight: 0.9 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 250 mm -Width: 8 mm -Price: per piece -Quantity: 10 available -Weight: 0.9 kg
Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 50 mm -Outer diameter: Ø 200 mm -Width: 40 mm -Number: 12 grinding discs available Price: per piece -Weight: 2.1 kg
ammeter -Type: VQE 96 600/5A -Price: per piece -Quantity: 3 available -Weight: 0.4 kg/piece
NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 128 mm -Outer diameter: 360 mm -Width: 30 mm -Price: per piece -Number: 8 available -Weight: 2.7 kg/piece
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 250 mm -Width: 8 mm Price: per piece -Quantity: 100x available -Weight: 0.6 kg/piece
NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...
Combi with 11.1.018 Foil cutting & Wrapping machine Serial Number: 4395905 Weight: 1,1 tons Power: 46 kVA Length mm: 3000 Width mm: 2300 Height mm: 1800 Working height: 85 cm. Transport size L x W x H: 3,0 x 2,3 x 1,8 Min.-max. glass thickness: max 350 mm Min.-max glass size: max 1500 width Electric. Connection: 125A Documentation: Present Instructions: Present Electric diagram: Present Parts list: None Photos/film available: Photos available
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E -E-motor: 2.0 / 1.35 kW -Plate diameter: 700 mm -Transport dimensions: 1040/780/H1300 mm -Weight: 69 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E -Power: 2.4 kW -Plate diameter: 790 mm -Transport dimensions: 1190/1000 / H1410 mm -Weight: 87 kg
0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...
Power trowel, concrete trowel, screed trowel, concrete troweling machine, power trowel -Manufacturer: Noggerath, Hand-operated concrete power trowel type G 850 E -Power: 2.4/1.5 kW / 2820/1425 rpm -Plate diameter: 900 mm -Transport dimensions: 1550/1000/H1130 mm -Weight: 88 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm -Weight: 81 kg
x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Number: 2x discs available -Price per piece -Weight: 1.4 kg/pc.
Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel 20 Jot - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Weight: 1.3 kg
Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.
new
Key data: 3 KW, 4 kVA, 10000 V
Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.
NNP Ribbon blender 300Kg stainless ribbon blender, 4Kw motor, central bottom discharge door, safety mesh and lid, 3Ph
Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor type SK 0-63L74-016 Speed: 148 rpm -Power: 0.18 kW -Shaft: Ø 16 x 40 mm -Protection class: IP44 -Dimensions: 340/130/H170 mm -Weight: 9 kg
Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
maximum number of results exceeded
please refine your search
