carto n used for sale

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

NNP Holding tank Stainless 350l holding vessel, two half moon inspection lids on top, side bottom discharge

Variobackgerät für Tartletts, Fabr. Neumärker/Meistermarken,

Key data: 42 mm, 588 mm

bar capacity 42 mm - three x 12 position turrets (3 x Y axis +/- 31 mm) - LNS Sprint S3 new in 2007 with rear magazine - weel tooled - Fanuc 31iTA Control

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 2000 rpm -Max. Delivery rate: 10-50 l/min -without pump housing -Dimensions: 172/260/190 mm -Weight: 9.9 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 115 mm -Piston diameter: 50 mm -Number: 6x available -Price: per piece -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/piece

Repair and Exchange service Reparatur und Austausch Service Part: AD converter converter type BKO-NC6800 H51 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Part: AD converter converter type BKO-NC6800 H01 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 60 mm -Piston diameter: 40 mm -Quantity: 5 available Price: per piece -Dimensions: 255/55/H80 mm -Weight: 1.1 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm -Number: 2x available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Repair and Exchange service Reparatur und Austausch Service Part: Pre Amp for AD converter converter type BKO-NC6800 H11 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

scrubber-dryer, floor cleaning machine, mop -Scrubber-dryer with drive -Working width: 850 mm -Practical area coverage: 2860 m²/h -Charger -with drive -Special suction foot guarantees maximum suction power at low cost.

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -for T-slot: 48 mm -Clamping height up to: approx. 350 mm -Clamping depth: 120 mm -Price: per piece -Number: 5 pieces -Dimensions: 180/100/H510 mm -Weight: 4.2 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -for T-slot: 48 mm -Clamping height up to: approx. 300 mm -Clamping depth: 140 mm -Price: per piece -Number: 5 pieces -Dimensions: 200/100/H450 mm -Weight: 4.2 kg

Repair and Exchange service Reparatur und Austausch Service Part: Pre Amp for AD CONVERTER CONVERTER type BKO-NC6800 H61 For MAZAK and MITSUBISHI Other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

suction capacity: - volume capacity: 4500 l/min : 38 mm low pressure: kpa Electric capacity: 1400 W voltage: 220-240 V Weight: 14,5 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,57x0,39x0,52 m Condition: new / unused: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 220-240V, 50-60 / 16Hz Colour blue Safety vacuum cleaner H class asbestos 3-stage filtration mobile Vacuum cleaner is supplied against additional charge of 140,79 EUR with 1 pack safety dust bag! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -for T-slot: 45 mm -Clamping height up to: approx. 500 mm -Clamping depth: 120 mm -Price: per piece -Number: 4 pieces -Dimensions: 180/80/H650 mm -Weight: 4.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Number: 6x available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Manufacturer: Festo -Type: NVF3-MOH-5/2-K-1/4-EX -PN: 2-10 bar -Number: 2 valves available Price: per piece -Weight: 0.3 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Electric motor, three-phase motor, -Power: 1.1 kW -Speed: 930 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 370/300/H250 mm -Weight: 39 kg

gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19 rpm -Power: 0.37 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 395/160/H255 mm -Weight: 16 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Adjustable geared motor, variable speed geared motor, electric motor -for Harbs folding machine K2V -Motor power: 0.75 kW -Speed range: 4 - 28 rpm -adjustable -Drive shaft: Ø 25 mm -Dimensions: 630/480/H245 mm -Weight: 66.5 kg

RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Load capacity: 500 kg -Lifting height: 1490 mm -Dead height: 1920 mm -Width: 630 -Length: 1000 mm -Platform: 600 x 600 mm -with: hand pump -Dimensions: 630/1000/H1920 mm -Weight: 114 kg

Stud welding machine, stud welding compact system, stud welding machine, stud welding -maximum current: A -without a pistol -Housing: robust -for threaded bolts: max. 10 mm -Number: 3x stud welding machines available -Price: per piece -Dimensions: 420/220/H290 mm -Weight: 14 kg

RAFFEL NH3 – 648 m² Brand:RAFFEL Type:NH3 – 648 m² Stock number:M23-2489 Cooling capacity:105 kW Application:Freezing Number of fans:Frieren Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4650 x 2250 x 5080 (5340) mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 648 m2. Visit our website: used-refrigeration

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, wet vacuum cleaners -Connection: 220 volts -Plastic container: for vacuuming liquids Power: Watts -Dimensions: 520/650/H930 mm -Weight: 23 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

RAFFEL NH3 – 554 m² Brand:RAFFEL Type:NH3 – 554 m² Stock number:M23-2493 Cooling capacity:90.0 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4600 x 2000 x 5000 mm Number in stock:1 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 554 m2. Visit our website: usded-refrigeration

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

RAFFEL NH3 – 378 m² Brand:RAFFEL Type:NH3 – 378 m² Stock number:M23-2491 Cooling capacity:60.0 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3900 x 1850 x 5060 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 378 m2. Visit our website: used-refrigeration

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Line filter, power line filter -Manufacturer: Bosch Rexroth -Type: NFD03.1-480-007 -Connection: AC 480 V -7A + 10% -Hz: 50-60 Hz -Number: 2x available -Price: per piece -Dimensions: 190/90/H50 mm -Weight: 0.76 kg

RAFFEL NH3 – 276 m² Brand:RAFFEL Type:NH3 – 276 m² Stock number:M23-2492 Cooling capacity:45 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3200 x 1850 x 5160 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 276 m2. Visit our website: used-refrigeration

Gear motor, electric motor, three-phase motor, electric gear motor -Flat gear -Speed: 120 rpm -Power: 1.5 kW -Construction: B3 -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 54 -Dimensions: 410/290/H215 mm -Weight: 29 kg