carto n used for sale

Nilma Turboidrex vegetable washer and dryer Serial: 951154 Stainless veg washer and dryer, 90l drum capacity, washing capacity per cycle: leaf veg 4kg - heavy veg, fruit, meat 15Kg, wash time 3min, drying capacity 1Kg per 1min, 1Ph

; Gross weight [kg]: 917

; Gross weight [kg]: 481

Angle conveyor (roller-chain) - galvanized rollers - stainless steel chain - working length of the roll: 730 mm - roll diameter: 50 mm - lifting on chains: B08-1 - spacing between chains: 145 mm - number of chains: 5 - construction: stainless steel - includes 2 geared motors: - for rollers – SEWUSOCOME; 0.25 kW; 1300/77 rpm - for chains – SEWEURODRIVE; 0.25 kW, 1300/77 rpm

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Control Other MAPPS IVB Grinding length [mm] 150 Specifications: Grinding ø (max.) 350 mm Grinding length (max.) 150 mm Grinding wheels-ø 25-180 mm Swivel range grinding headstock (max.) 230° Grinding spindle: Technology internal grinding spindle Speed range 3-20,000 rpm Power (max.) 11 kW Grinding wheel holder HSK-A63 Drilling spindle: Drilling spindle technology Speed range 1,500-3,500 rpm Power (max.) 7.5 kW Tool holder HSK-A63 Workpiece spindle: Technology Direct Drive Clamping surface ø265 mm Table load (max.) 200 kg Workpiece Clamping Pneumatic Chuck General: Travel in X/Z 965/532 mm Rapid traverse in X/Z 24/20 m/mim Equipment/accessories: Direct displacement measuring system (glass scale) in X/Y Chip Management Magnetic Belt Conveyor Coolant management coolant system with paper belt filter and temperature control Workpiece Measurement P ...

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

M. No.: 3839/11

Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm

Type: Engine, Type number: TCD2015 V6 M

; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

Used Climaveneta NX2-G06/K 0676 air-cooled chiller on R454B built in 2021. Complete with 5 Bitzer GSD80485VLB4-2 & 1 Bitzer GSD80385VLB4-2 scroll compressors, condenser with 9 Ziehl-Abegg FN080-SDA.6N.V7P5 fans - 50 Hz - 1,9/1,1 kW - 870/630 RPM - diameter 800 mm that produce an airflow of 184.068 m³/h, shell and tube as evaporator and a control cabinet Carel controller. The chiller has a capacity of 636,3 kW at a water inlet/outlet temperature of 12°C/7°C and a condensing temperature of 35°C. Specifications: Brand: Climaveneta Type: NX2-G06/K 0676 Product type: Air cooled chiller Capacity kW: 636,3 kW Capacity Tons: 180,9 T Refrigerant: R454B Weight in kg: 3980 kg Sizes: 6260x2260x2550 mm (LxWxH) Compressors: 5 Bitzer GSD80485VLB4-2 & 1x Bitzer GSD80385VLB4-2 Display: Carel pGD1 Number of fans: 9 Fan specifications: 50 Hz - 1,9/1,1 kW - 870/630 RPM Year of built: 20 ...

Heidenhain Heidenhain ND780 520 010-01

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Please note: This is an original Neugart product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50 mm, centring 180 mm, pitch circle 215 mm, z=4, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law appl ...

Key data: 450 mm, 290 mm

Kiptisch

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR

Available in stock 1 x Used MAN NR34/S022 Turbocharger. Fully serviced at MAN and ready to be installed. The equipment is used but in good working conditions.

length in total: 3000 mm band width: 200 mm conveying height: 1900 total power requirement: 1 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 3x1x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

SHUZ TUNG NCR38B tube and profile bending machine was built in 2008 in Taiwan by SHUZ TUNG MACHINERY INDUSTRIAL CO., LTD. The machine, distinguished by its high precision and ease of operation, enables automatic bending and forming of arches from tubes or profiles with a maximum diameter of 38 mm. All process parameters, including even the most complex shapes, are programmed in the intuitive NC controller with memory for up to 500 work programmes. The NCR38B mandrel bending machine is offered with equipment, consisting of, among others, tooling for tubes with 16, 22 and 25 mm diameters. The total weight of the machine is 1500 kg. Technical specifications of the SHUZ TUNG NCR38B tube bending machine - bending capacity: 38×2 mm - bending angle: 0-190° - maximum bending radius: 170 mm - mandrel length: 1800 mm - bending speed: 45°/s - rotation speed: 240°/s - bending accuracy: ...

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document

REF-1059 CRM NEXUS 220 CHOP CUTTER Manufacturer: C.R.M. Model: NEXUS 220 Year: 2003 All stainless steel Power: 4 kW Voltage: 400 V / 3-phase Mobile on casters Max. product dimensions: length 100 cm, with 22.5 cm, height 27 cm Overall dimensions: length 221 cm, width 85 cm, height 136 cm

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

Manual cleaning system for printing tools Type: HC-1000 Year of Make: 2020 good condition, fully functional, incl. stainless steel castors and various accessories (see photos) This revolutionary cleaning system is ideal for thorough and gentle cleaning of printing tools. Thanks to its well thought-out design and equipment with durable components, it meets the highest standards of efficiency and ease of use. Its detergent is non-volatile (VOC-free), fully recyclable and NEVER needs to be replaced thanks to the integrated recycling system. This saves time, reduces operating resources and disposal costs and also protects people and the environment. Features: - Completely solvent-free - Cleaning agent is recycled - No liquid waste - No explosion protection necessary - No suction necessary Equipment: - Flexible hose holder for precise work - Four sturdy stainless stee ...

NNP Stainless hopper and screw Stainless 200Kg hopper with stainless screw outfeed, screw length 2100mm, screw diameter 90mm, mobile, 3Ph

Reference ID: PP-55532 Category: Label Printer Manufacturer: Nilpeter Model: FA 4250 Year Built: 2007 Colors: 8 Max. Size: 420 mm Condition: Good Location: Europe Availability: Immediately Machine Description • Working width: 420 mm • Number of units: 8 • 8 UV colour stations + hot air drying on 8th station • Installed new UV drying system: GEW E2C (year 2020) • Servo driven • Water cooling / chill rollers • Printing cylinders and anilox in sleeve version • Unwinding (max. roll diameter: 1000 mm) Equipment / Options • Roll splicing table • Corona • Lengthwise waste cutting with waste removal • Table for roll-sheet cutting • Software for cold foil printing • Winding with pressure roller (max. roll diameter: 1000 mm) • Video monitoring camera • Printing film: 25–300 my • Automatic register • Included: 10 anilox rollers  ...

DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of  ...

NAN-JHIEH NJ-900QE polystyrene pre-expander was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is used in the pre-foaming of polystyrene, which is the first stage in the production of styrofoam boards. The raw material in the form of granules is subjected to high-temperature steam, which causes it to increase in volume several times. The result is expanded polystyrene EPS in a spherical form with a number of valuable properties, such as insulation, durability and flexibility of use. The NJ-900QE EPS pre-expander weighs 2800 kg. The machine on offer is part of a larger EPS production line. It is also possible to purchase the entire technological line, consisting of the following components: – NAN-JHIEH polystyrene pre-expander – EPS granulate feeding system – styrofoam forming machine (5 units) – injection moulding machine – robot for injection mou ...

NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.

2 pieces NIRO belt conveyor belts - Length: approx. 2,000 mm - Width: approx. 600 mm - height adjustable The belt speed can be changed

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

Accident Protection IR Light Barrier Type4 Year of construction unfortunately unknown. Installation Reach : 2000mm Obstacle : Ø 40mm Supply, degree of protection and all other information can be found in the attached pictures. Yours sincerely,

Used belt press made by Monobelt, type NP12CK. New 2009. Weight 1620kg. Belt width - 1200 mm. Working flow - up to 10 m3 / h. Throughput max - 170-360 kg DM / h. Installed power: Press with 0.55 kW thickener 2.2 kW flushing pump Rinse water quantity 5 m3 / h Net weight / maximum usable weight 1620/2800 kg Sludge inlet connection DN80 1 ”GF rinse water inlet Filtrate outlet connection DN150 Manufacturer's documentation.

Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional

Engine Make CUMMINS Engine Type C1100 D5 Power KW / kVa PRP 888 / 1110 Fuel DIESEL Generator Model STAMFORD S6L1D F41 Volts 400 Hz 50 Year of Manufacturing 2022 Running Hours 0 NEW

We have available in our stock 2 units Wartsila Nohab WN 12V25 complete diesel engines 2760 Kw at 900 RPM Please contact us at: infofin-marine.com

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .

Normpack adhesive roll dispenser Two dispensers for installation position bottom / top Roll width 50mm