134,073 used machines on RESALE, but how to find them? Machine Search
Brand: Powerdale Nexxtender Max. power - 22 kW Width - 250 mm Height - 250 mm Installation side connection design: 3-phase Number of charging points: 1 Length of the charging cable: 7 m Degree of protection (IP): IP55 Note: the manufacturer of these charging stations is faiilite, it is possible that the functionalities no longer work. The charging station works normally when standalone. Auction-ID: A1-46359-9
Round Baler New Holland 658 CropCutter Year of Make: 2000 With cutting unit (CropCutter) – suitable for silage, hay and straw Network binding available Pick-up width: approx. 2.00 m Bale diameter: up to approx. 1.80 m Number of bales: approx. 30,000 Equipment: Bale ejector hydraulic pick-up Condition: Used general condition Signs of wear and tear due to age and use functional not tested Auction-ID: A7-46606-1021
SEIFERT 160/M2 – Workpiece X-Ray Inspection System General data: Manufacturer: Seifert Model: 160/M2 Machine type: Industrial X-ray inspection system (fluoroscopy cabinet) Technical details: X-ray tube type: MXR160/0.4-0.4 Maximum voltage: 160 kV Configuration: Fluoroscopy cabinet for non-destructive testing (NDT) Description: Industrial X-ray inspection system SEIFERT 160/M2 designed for non-destructive testing of workpieces. Equipped with MXR160 tube and enclosed fluoroscopy cabinet, the machine enables internal inspection of components for quality control and defect detection in manufacturing environments. Auction-ID: A7-46498-220
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power with 4 PV modules:1800 Wp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 1800 Wp. Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 21.8 Kg. Quantity: 4 pieces. Logistical data: Loose and unpacked for self-collection Weight: approx. 88kg Please come with suitable vehicle! Auction-ID: A1-46601-67
Brand: Powerdale Nexxtender Max. power - 22 kW Width - 250 mm Height - 250 mm Installation side connection design: 3-phase Number of charging points: 1 Length of the charging cable: 7 m Degree of protection (IP): IP55 Note: the manufacturer of these charging stations is faiilite, it is possible that the functionalities no longer work. The charging station works normally when standalone. Auction-ID: A1-46359-28
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power with 4 PV modules:1800 Wp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 1800 Wp. Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 21.8 Kg. Quantity: 4 pieces. Logistical data: Loose and unpacked for self-collection Weight: approx. 88kg Please come with suitable vehicle! Auction-ID: A1-46601-9
Allimex cable clamp Allin 2 boxes with 1000 pieces Total: 2000x bolt + 2000x knurled nut M8 Stainless steel Auction-ID: A1-46359-489
NABER N41 – Annealing and Hardening Furnace General data: Manufacturer: Naber Model: N41 Machine number: 67084 Year of manufacture: 1986 Machine type: Annealing and hardening furnace Condition: Used (heaters require renewal) Technical details: Maximum temperature: 1150 °C Power: 12 kW Voltage: 380 V Description: Industrial heat treatment furnace NABER N41 designed for annealing and hardening processes. Suitable for thermal treatment of metals and components. The unit requires replacement of heating elements before operation. Auction-ID: A7-46498-187
Unused Options: - Quick change system - 3 bins (wide, slotted and with teeth) - Sliding windshield - Boom movable - Tracks can be hydraulically widened - LED lights on roof and boom - Sliding blade can be widened Auction-ID: A1-40377-83
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power per pallet with 66 PV modules: 29,700 Wp / 29.70 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 29,700 Wp / 29.70 KWp . Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 22 kg. Number of units: 66 pieces. Logistical data: Number of pallets: 2 Pallet dimensions: approx. 1,800 x 1,200 x 1,500 mm. Weight: approx. 1600 kg Auction-ID: A1-46601-71
Bednar Swifter SO 6000 Profi – Year 2024 – 6 m – New High-quality seedbed combination with 6 m working width Year of manufacture 2024 – New machine / unused Hydraulically foldable for transport Equipment: Chassis with transport axles Air brake system Front dozer rail Flat bar bender roller Crosskill double roller at the rear Gamma tine fields Technology: Optimal seedbed preparation in one operation Uniform reconsolidation High area performance Auction-ID: A7-46606-1009
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power per pallet with 46 PV modules: 20,700 Wp / 20.70 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Power per solar module: 450 Wp. Total output: approx. 20,700 Wp / 20.70 KWp . PV module dimensions: 1,762 x 1134 x 30 mm. Weight: approx. 21 kg. Number of units: 46 pieces. Logistical data: Number of pallets: 1 Pallet dimensions: approx. 1,800 x 1,200 x 1900 mm. Weight: approx. 1100 kg Auction-ID: A1-46601-59
Valtra N155e Active Tow Tractor • Year of construction 2022 • Only approx. 80 operating hours (demonstration machine) • 114 kW / 155 hp • 50 km/h version • Powershift transmission (Active) with automatic functions • Load-sensing hydraulic pump 160 l/min • 4 DW rear control units • 1 DW control unit at the front • Front linkage • Air brake system • PTO 540 / 540E / 1000 rpm • Front axle suspension • Sprung cab • Air conditioning • Panoramic roof • DAB+ radio • Air-suspended driver's seat • Tyres: – Front 540/65 R28 Trelleborg – Rear 650/65 R38 Trelleborg • Colour: Olive green metallic • Very well maintained, almost as good as new condition • No automatic pull jaw included Auction-ID: A7-46606-1501
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal output per pallet with 24 PV modules: 10,800 Wp / 10.80 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 10,800 Wp / 10.80 KWp . PV module dimensions: 1,762 x 1134 x 30 mm. Weight: approx. 21 kg. Number of units: 24 pieces. Logistical data: Number of pallets: 1 Pallet dimensions: approx. 1,800 x 1,200 x 1,100 mm. Weight: approx. 590 kg Auction-ID: A1-46601-55
Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power per pallet with 12 PV modules: 5,400 Wp / 5.40 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Power per solar module: 450 Wp. Total output: approx. 5,400 Wp / 5.40 KWp. Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 21 Kg. Number of units: 12 pieces. Logistical data: Number of pallets: 1 Pallet dimensions: approx. 1,800 x 1,200 x 900 mm. Weight: approx. 290 kg Auction-ID: A1-46601-74
Excellent condition - Fully operational - Loading / Transport possible! Year of construction: 05.06.2018, max. spindle speed: 10,000 rpm, own weight: 3,070 kg, total weight: 3,500 kg, Operating hours read off: machine: 8,678:16 h, spindle: 3,567:18 h External dimensions: 2,500 x 3,000 x 2,500 mm, with MAX 5 single control, with WinMax software, 1 x 19" LCD color screen, with high-pressure cooling system for coolant supply through the spindle, Elmusion cooling lubricant, coolant pressure 10 bar, 20-station tool changer, Attention : Tools and tool holders are not included in the lot Integrated hydraulic tool clamping system, with workpiece length detection with a probe and tool length calibration with a laser, RENISHAW OMP60 workpiece probe system, RENISHAW Laser NC4 tool probe system, with chip worm, including digital operating manual on a USB stick Condition Note: Machine has never be ...
Excellent condition - Fully operational - Loading / Transport possible! Work table: Clamping surface: 790 x 560 mm Table load (max.): 600 kg Equipment / accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure Oil mist extraction: Mechanical separator Set-up mode: Electronic handwheel Further equipment: Flushing gun Transport dimensions: Machine: 2,800 x 2,000 x 2,700 mm, approx. 4,100 kg Chip conveyor: 3,000 x 1,000 x 1,650 mm, approx. 450 kg IKZ unit: 1,800 x 1,300 x 1,800 mm, approx. 450 kg
-Manufacturer: New Holland - Type: T3 -Category: Agricultural Tractor -ROPS structure: SLTV3 (CE certified, tested according to OECD/OSHA/SAE). . -Technical data (according to nameplate): -Front axle load: 2200 – 2850 kg -Axle load rear: 4600 kg -Permissible towing capacity unbraked: 3700 kg -With overrun brake: 8000 kg -With independent brake: 6000 kg -With assisted brake: 21000 kg Weight: -Permissible total weight: approx. 7000 kg (derived) -Net weight: not known Condition: -Visually used condition with usual signs of wear -Technical condition not checked Equipment: -Roll-over protection (ROPS) available -Notes: -Transportation by buyers . - Fork not included - Solenoid switch for quick forward and reverse gear change has a defect Auction-ID: A7-46022-10000
Including: 1 tank capacity: 400 L; flow rate: 1.5/6.6 m³/h. Equipped with Calpeda CM 22/1E pump (22O V, 50 Hz, 0.5 A) used to mix water/glycol. Including: 1 tank with electric liquid pump. Estimated weight: 210 kg Approximate dimensions: 1200x800xh1900mm 1500x800x2000 mm Auction-ID: A7-46655-22
Various designs and sizes; pre-treated white; without glass; FSC Auction-ID: A1-46266-383
Electrically heated convection chamber furnace Power (max.): 28 kW Temperature (max.): 450 °C Dimensions combustion chamber: 750 x 1,000 x 750 mm Combustion chamber volume: 500 l incl. connection cable 63A Transport dimensions: 1,600 x 1,850 x 1,980 mm, approx. 1,000 kg Auction-ID: A7-46660-11
Including: N°2 Metal Box for electronic components and N°1 16-port network switch of CENTRE COM brand.Serial: 3016TR Estimated weight: 23 kg Approximate dimensions: 800x600xh650 mm Auction-ID: A7-46655-217
ZERE X-85 HYD Forestry Winch – new machine General data • Manufacturer: ZERE • Model: X-85 HYD • Year of construction: 2025 • Condition: as good as new • Available: immediately Technical data • Pulling force: 8.5 t • Braking force: 106 kN • Rope speed: approx. 0.6 m/s • Rope: 100 m / Ø 12 mm (standard) • Max. rope capacity: 120 m / Ø 12 mm / 100 m Ø 13 mm • Tractor power: from 80 hp • Weight: approx. 550–590 kg • Cat.: II / III Equipment & Features • Electro-hydraulic operation • Radio remote control as standard • Hydraulic rope ejection • Automatic stop function (limit switch) • Rope ejection with speed regulation • Robust protective grille • Lower pulley • Towbar • Holder for chainsaw • PTO shaft included Options • Anti-tilt system Application area • Professional forestry work ...
Capacity: 150 Kg; minimum weight: 2.5 Kg; division: 50 gr; Weighing table size: 750 x 870mm. Serial: 206285/37 Estimated weight: 140 kg Approximate dimensions: 1200x800xh200 mm Auction-ID: A7-46655-106
Equipped with a mobile chassis, sealing bar (600 mm), conveyor belt, machine pneumatically and electrically controlled. Auction-ID: A1-46064-87
new Wacker Neuson cab - Perfect for replacement Auction-ID: A7-46022-2514
MLVI; 1 x left and 1 x right AFM. 880x2315 mm; 1 x Left; 1 x right dim. 930x2315 mm Auction-ID: A1-46266-321
Stekro Snow plough Vario 2.70 m – used General data • Manufacturer: Stekro • Model: Vario snow plough • Working width: 2.70 m • Year of construction: 2025 • Condition: used • Available: immediately Equipment & Features • Vario snow plough (infinitely adjustable) • Hydraulically swivelling • Electronic control • Robust steel construction • HARDOX wear parts • Rubber strip (protective strip) • Collision protection • Support legs for a secure stand • Marker lights • Side markings • Wheels for height control Application area • Winter service • Clearing snow on roads, yards and paths • Municipal and agricultural use Prerequisites • Suitable for tractors from approx. 50–110 hp Condition • Used machine • Very neat condition • Ready to use Contact Now Kristina Kreimer – Surplex / TBAuc ...
Samasz Snow Plough PSV 271 New Machine General data • Manufacturer: SaMASZ • Model: PSV 271 • Available: immediately Equipment & Features • Vario snow plough (adjustable) • Working width approx. 2.70 m • 3-point mount • Rubber strip (protective strip) • Hydraulically swivelling • Stable and robust construction • Boundary markings Application area • Winter service • Street and yard clearance • Municipal and agricultural use Condition • Ready to use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-46022-2024
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-46647-236
16002531/17034191 Note: Adapter for tripod needed, lamp holder not suitable for tripod! Auction-ID: A7-46481-137
V.v. Hard top cover; protective cover cover ; Bluetooth speakers; LED lighting; 5956 Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; massage pump 2x2HP; 3 Fontains + Waterfall; Balboa system; 64 hydraulic jets; 50Hz; CE; 3 seats; 2 lounge; LED level light 22pcs; 5956 Auction-ID: A1-46415-24
Power: 0.55 Kw; 0.75 hp; flow rate min/max 0.3 - 2.8 m³/h; Serial: 1998147276 Estimated weight: 25 kg Approximate dimensions: 400x200x200 mm Auction-ID: A7-46655-52
23019780 Note: The article is defective! Auction-ID: A7-46481-1067
MDCX 1x right 880x2315 mm, 1x right 930x2315 mm; 2x left 930x2315 mm Auction-ID: A1-46266-320
Left 880x2115 mm; pre-treated white; without glass; FSC Auction-ID: A1-46266-351
unused; Key lock ; 120L clean water tank; 120L holding tank; 6795 Auction-ID: A1-46415-299
Designation: Scale Length: 12 m Condition: Not specified Remarks: Sold as is, without warranty Auction-ID: A1-45887-1
SaMASZ Pruning Saw PT3-190F – New Machine (2025) General data • Manufacturer: SaMASZ • Model: PT3-190F • Year of construction: 2025 • Condition: New machine • Available: immediately Technical data • Working width: 1.90 m • Number of saw blades: 3 pieces • Max. branch thickness: up to approx. 120 mm • Required pump capacity: 55–70 l/min • Hydraulic pressure: 180 bar • Weight: approx. 195 kg Features & Benefits • Powerful pruning saw for efficient pruning • Robust design for professional continuous use • Three saw blades for high area performance • Clean cutting pattern even with heavier vegetation • Hydraulic drive for reliable performance • Compact design – ideal for working on field edges and roads • Suitable for attachment to booms (e.g. FISHER) • Equipped with Fischer adapter • Additional Euro mount f ...
Stick welding machine Estimated weight: 15kg Approximate dimensions: 800x600xh600mm Auction-ID: A7-46655-172
V.v. Hard top cover; protective cover cover ; Bluetooth speakers; LED lighting; 5956 Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; massage pump 2x2HP; 3 Fontains + Waterfall; Balboa system; 64 hydraulic jets; 50Hz; CE; 3 seats; 2 lounge; LED level light 22pcs; 5956 Auction-ID: A1-46415-23
930x2315 mm right Auction-ID: A1-46266-323
Stekro Snow plough Vario 3.20 m – used General data • Manufacturer: Stekro • Model: PVHU5P 3200 (Vario snow plough) • Working width: 3.20 m • Year of construction: 2025 • Weight: approx. 580 kg • Condition: used • Available: immediately Equipment & Features • Vario snow plough (hydraulically adjustable) • Hydraulically swivelling • Electrical/electronic control • Robust steel construction • HARDOX wear version • Rubber strip (protective strip) • Collision protection • Spring flaps for obstacle adjustment • Support legs • Marker lights • Warning signs Application area • Winter service • Clearing snow on roads, farms and business areas • Municipal and agricultural use Condition • Used machine • Signs of wear and paint chipping present • Technically ready for use Contact Now Kristina Kreim ...
Marpol PMTS10 – tandem tipper 13 t (new machine built in 2025) General data • Machine type: Tandem tipper • Manufacturer: Marpol Trailer • Model: PMTS10 • Year of construction: 2025 • Permissible Total weight: 13,500 kg • Net weight: approx. 3,500 kg • Payload: approx. 10,000 kg • Condition: New machine Technical equipment • Robust steel construction • Tandem landing gear for high stability • Hydraulic tipping function (rear tipper) • Large-volume body with high side walls • Tyres: 550/45-22.5 • Air brake system • Mechanical support leg • Lighting system with warning signs • Ladder for easy access to the trough • Tailgate oscillating / opening Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and powerful tandem tipper for agricultural transport work – ideal f ...
Mateng EMR 105-NL – Excavator mulcher (new machine built in 2025) General data • Machine type: Excavator mulcher • Manufacturer: Mateng • Model: EMR 105-NL • Year of construction: 2025 • Net weight: approx. 243 kg • Condition: New machine Technical equipment • Robust mulching head for excavator attachment • Suitable for grass, undergrowth and light vegetation • Hydraulic drive • High quality hydraulic motor (Made in Italy) • Compact and stable design • Low-wear design • Protective cover for safe working • Easy maintenance and easy access to components • Universal mounting plate for various carrier devices Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Compact and powerful excavator mulcher – ideal for maintenance work on embankments, ditches and hard-to-reach areas. C ...
Slurry separator FR-280 with submersible cutting pump – new machine General data • Model: FR-280 • Condition: unused • Available: immediately Technical data • Motor power: 5.5 kW • Pump power: 4 kW • Voltage: 380V / 50Hz / 3-phase • Processing: approx. 20–30 m³/h • Weight: approx. 650 kg • Dimensions: 2,420 x 830 x 1,320 mm • Screen size: 280 mm • Inlet: 76 mm • Outlet: 110 mm • Material: Carbon Steel + Stainless Steel (SS304) Equipment & Features • Incl. submersible cutting pump • Various screen baskets available • Robust construction • Easy maintenance Recommended Screen Sizes • Pig manure: 0.75 mm • Cow manure: 0.75 – 1 mm • Chicken manure: 0.5 – 0.75 mm Application area • Slurry separation • Agriculture / Biogas • Solid-liquid separation Condition • Ready to use Con ...
maximum number of results exceeded
please refine your search
1.000 € 
