137,181 used machines on RESALE, but how to find them? Machine Search
pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.
sheet width: 3000 mm plate thickness: 10 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The all-rounder combines outstanding workmanship with a wide range of work. Our machine also offers intuitive operation that optimizes your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. In addition, our active material preference device ensures optimal web tension for flawless packaging results. The extremely powerful brushless motors and the user-friendly color touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. Up to 50 different products can be stored. For this packaging line, we also offer fully and semi-automatic feeders, which we can also integrate for you at a later date. The machine is available in both directions and has a rotary cross seal with electroni ...
The machine is usually always in stock with us. Short delivery times are possible here. Features of the facility 1. Chain conveyor belt 2.5 meters long (other lengths possible on request) 2. Adjustable bag former 3. Double Film Loader + Automatic Film Centering Device 4. Rotary final sealing, single-sealing jaw 5. Solid, medium fin sealing structure 6. Four servo control drives - Active material preference shaft - Medium sealing - Final sealing - Conveyor belt 7. HMI Control Panel 8. Three individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depends on produ ...
Centrifugal pump Manufacturer: Hilge Type: Hygia II/30C Power: 11 kW Speed: 2930 rpm LBH: 650 x 400 x 410 mm
ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW
TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h
GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm Cutting width: 300 mm Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs Cutting chamber opening: 300x440 mm Main motor power: 11 kW Speed: cca 300-400 1/min Screen opening (standard): 6–8 mm, round Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase. Power: 3.1 kW Speed: 2830 rpm Volume flow: 2760 m³/h
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h
2018 Xeikon 3030 plus 5 colurs digital label press roll to roll Manufacturer: Xeikon Type: 3030 plus Web width: 330 mm Year of production Machine comes with 2 spare developers for Orange and green Key Specifications: Technology: Dry Toner, Full Rotary Print Resolution: 1200 dpi (with 4-bit variable dot density) Web Width: 330 mm (13 inches) Print Speed: Up to 15 meters/min (49.2 ft/min) Colors: 5 (CMYK + Opaque White or Spot/Gamut Color) Substrates: Wide range, including self-adhesive materials (BOPP, PVC, PET), paperboards, and papers (40-350 GSM) Toner: FDA-approved, food-safe Features: Variable repeat length, inline densitometer, potential for inline finishing, metallic label production via ColorLogic, microtext, variable data.
Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV Year of construction : 2012 Condition : New Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Cqs9sygju Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day
Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg
Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel
1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax
Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Lödige GmbH Model : FKM 300 D Ploughshare Mixer electr. Values : 400V 50 Hz, 3Ph Drum capacity : 300 l Capacity : 100 – 210 litres Details : - Parts in contact with the product are made of V²A - Front-mounted 2 cleaning flaps with safety switch - Feed nozzle with safety switch - Emptying opening in the bottom with manually operated emptying flap in cylindrical nozzle - Centrifugal unit with ploughshare blades (normal blades) - Bearings & Seals New (incl. gearbox & engine) - All screws New - Sandblasted and then Newly painted We offer this machine for sale "in overhauled condition" with a 6 month warranty on new parts. from the Hess warehouse. Lichtenau; unpackaged
sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical basket bottom discharge used centrifuge with scraper, mounted on inertia plate. Type RINA 300F-1000 manufactured by RIERA NADEU. It belongs to the 300 series for liquid-solid automatically separation processes.
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
Key data: 300
Dürr Eco+Energy ORC 300 HT. 2016 - 500 Hours Model: Eco+Energy ORC 300 HT KWK Year: 2016 Hours: 500 Capacity: 300 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC with oil pump skid. Price: €240,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange
sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GRANULATOR / EDGE STRIP CRUSHER The granulator is designed for grinding various plastic waste. Specifications: Motor power: 7.5 KW Capacity: 200 kg/h V-belt: 3 pcs. Speed knife shaft: 715 rpm Blower type: 7,055 kW Housing opening: 300 x 260 mm Rotating knives: 3 Fixed knives: 2 Sieve: 8 mm Weight: 800 kg Connection: 400 Volt, 50 HZ
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Specifications: - Three-jaw chuck 300 mm - Chuck manually rotatable 360° - Division grid 24 - Peak height approx. 185 mm - Duchgang / passage 55 mm - Total depth without baking approx. 270 mm - Total depth with jaws approx. 310 mm - Flange plate horizontal W 300 x D 145 mm - Flange plate vertical W 300 x H 335 mm - Weight 100 Kg - Space requirement W 320 x D 310 x H 335 mm
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of ...
New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...
Cantilever rack NEW Data: - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 300 cm made of IPE160. - 12 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insi ...
Oven ATA Maxi temperature: 300° C Power: 1,5 kW Voltage: 380 V Internal oven dimensions: Depth 500 x W 295 x H 200 mm External dimensions: L 600 x H 560 x Depth 800 mm Weight: approx 80 kg
saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 ...
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): ...
maximum number of results exceeded
please refine your search
