129,792 used machines on RESALE, but how to find them? Machine Search
Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor, Permanent Magnet DC Servo Motor -Max. Speed: 2000 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 685/142/H190 mm -Weight: 31 kg/piece
Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T
Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...
Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg
Thread cutting machine, pipe thread cutter, thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -for: Pipe size: max. 2 inches -Cutting jaws: 1/2-2 inch -Operating voltage: 240 volts -Dimensions: 1000/600/H1114 mm -Weight: 80 kg
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 275 mm -Piston diameter: 50 mm -Piston rod: Ø 20 mm -Quantity: 1 available -Price: per piece -Dimensions: 65/65/H530 mm -Weight: 4.85 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 300 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 522 mm -Total length extended: 822 mm -End position cushioning: adjustable on both sides -Dimensions: 70/64/H522 mm -Weight: 4.65 kg
X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -
MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece
Transnorm belt conveyor GF 3000-700-600 RA2225 Technical data: Conveyor length (NL): 3000 mm frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...
Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.
Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available -Price: per piece -Weight: 10 kg/piece
Cross-flow fan QLN 65/0012 A3-3038-33 tg (several available)
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Gear motor, electric motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -without breaks -Dimensions: 650/280/H300 mm -Weight: 50 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW
Servo drives from Indramat KDS 1.1-100-300-W1
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg
Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Recording with: Slotted hole -Length (unit of measurement): approx. 300 mm - Fine-tuning -Quantity: 2 available Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...
Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg
Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg
SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 3005/818/H800 mm -Height: adjustable -Plate thickness: 35 mm -Plate: with supporting ribs -7x dovetail: groove 38/48 mm -Groove length: 1820 mm -Weight: 1100 kg
Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg
Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg
Capacity up to 6 tons For more details contact with us
Key data: 4 mm, 80 , 20
Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).
maximum number of results exceeded
please refine your search
