carbon steel used for sale

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

USED GLATT STAINLESS STEEL 1000 LITRES BICONICAL MIXER REF.: C6525 Bicone mixer made of stainless steel manufactured by GLATT with a total capacity of 1000 liters. General characteristics: Manufactured by GLATT Type Biconical mixers Material Stainless steel Year built 1998 Weight 1030 kg Transport dimensions: Total height: 2200 mm Total length: 2430 mm Total width 1500 mm Bicone dimensions: Body diameter: 1300 mm Body height: 350 mm

CALEVA MODEL 380A STAINLESS STEEL SPHERONIZER REF.: E0013 Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet with local controls. General characteristics: Manufactured by CALEVA Model 380A Material Stainless steel Motor characteristics: Voltage 415 V Power 1.5 kW - 2 cv Frequency 50 Hz

USED STAINLESS STEEL 18.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C6286 Stainless steel vertical tank with a capacity of 18,500 liters with agitation and internal coil. Top Klopper head with central stirring flange, manhole, sight glass and flage nozzle. Klopper bottom with bottom discharge and interior coil. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 18.500 litros totales Bottom type Klopper Type of agitation Impeller Serpentine + On 4 brackets Man hole x1 Peepholes x1 Rompecorrientes X4 Vessel outside diameter 2.200 mm Vessel height 4.400 mm Vessel height + funds 7.700 mm Motor characteristics: Power 15 kW - 20 cv Rotational speed 1500 rpm Reducer characteristics: Rotational speed 160 rpm

USED STAINLESS STEEL 16.000 LITRES JACKETED TANK WITH INNER COIL REF.: C6285 Vertical tank made of stainless steel with a total capacity of 16,000 liters. Klopper top bottom with manhole, sight glass, sight glass for spotlight, lifting lugs, central stirring flange and flange-type connections. Jacketed klopper lower bottom with inner coil and bottom discharge. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 16.000 litros totales Bottom type Klopper Camisa En el fondo inferior On 4 brackets Ears x2 Man hole x1 Peepholes x2 Vessel outside diameter 2500 mm Vessel height 2750 mm Vessel height + funds (TOTAL: 4400 mm)

USED AGUILAR Y SALAS STAINLESS STEEL 11.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C9216 Vertical tank made of 304 stainless steel by AGUILAR Y SALAS with a capacity of 11,500 liters. With double height propeller agitation and internal coil at the bottom. On barckets. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel 304 Year built 1986 BODY COIL Design pressure atm 10 bar Design temperature 90 ºC 190 ºC Test pressure estanco 18.7 bar Volume 11.500 l 12 l Weight 1500 kg 30 kg Technical characteristics: Capacity 11.500 l Serpentine 12 l On Brackets Vessel outside diameter 2000 mm Vessel thickness 4 mm Vessel height 3500 mm Vessel height + funds 4320 mm Thickness top bottom 4 mm Bottom bottom thickness 5 mm Motor characteristics: Rotational speed 1390 rpm Reducer characteristics: Ratio 1-29 Rotati ...

USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm

USED STAINLESS STEEL 304 30.000 LITRES APQ TANK WITH INTERNAL COIL REF.: C9033 Vertical tank made of 304 stainless steel by NIPRO with a capacity of 30,000 liters. Heat-insulated body and bottoms, with a 13.5-liter internal coil on the lower bottom. General characteristics: Manufactured by NIPRO Material Stainless steel 304 Year built 1987 Weight 2.700 kg BODY COIL Design pressure atm 4 bar Design temperature 40 ºC 90 ºC Working temperature atm 4 bar Volume 30.000 l 13.5 l Weight 2.700 kg 15 kg Technical characteristics: Capacity 30.000 l Bottom type Flat Serpentine + Insulated + Man hole + Vessel outside diameter 2400 mm Vessel height 6600 mm Vessel height + funds 7000 mm

USED STAINLESS STEEL 10.000 LITRES TANK REF.: C4531 Vertical tank manufactured by PIERRE GUERIN in stainless steel with a capacity of 10,000 liters. Flat bottoms, with security camera and electrical resistors. General characteristics: Manufactured by PIERRE GUERIN Material Stainless steel Year built 2005 Technical characteristics: Capacity 10.000 L Bottom type Flat

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

Stainless steel work table with lower shelf with 1x drawer The others are unfortunately missing Very solid, stable robust and heavy! Metrics: Height: 90cm Width: 300cm Depth: 88cm

USED STAINLESS STEEL 450 LITRES TANK REF.: C6886 General characteristics: Material Stainless steel Technical characteristics: Capacity 450 litros totales Bottom type Klopper On 3 legs Vessel outside diameter 780 mm Vessel height 950 mm Vessel height + funds (TOTAL: 1650 mm)

Stainless steel work table with lower shelf with sheet metal storage Sheet metal dimensions: 47x60cm Height: 85cm Width: 160cm Depth: 80cm

Stainless steel work table Height: 85cm Width: 80cm Depth: 70cm

Stainless steel work table with lower shelf Height: 85cm Width: 128cm Depth: 80cm

Stainless steel work table with 2 drawers with lower shelf with jug- on rolls Height: 85cm Width: 200cm Depth: 80cm

Stainless steel work table 1x Drawers with sheet metal shelf for 60x40cm sheets Very Robust, Stable and Heavy Height: 84cm Width: 100cm Depth: 70cm

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Steel hall, steel construction, nacelle partly covered sandwich panels used Manufacturer: unknown partially covered sandwich panels welded Dimensions approx. 6.5 x 6.5 x 5 m The house was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Billboard steel construction galvanized used Manufacturer: unknown 8 elements U 120 1.5 x 6.05 m with DIBOND panels (Aulminium composite panels) Dimensions approx. 12 x 6 m approx. 6.5 t Changes and errors in the technical data, information and prices as well as prior sale reserved.

Stainless steel work table with jug- without drawers with sheet metal shelf for 60x40cm sheets Very Robust, Stable and Heavy Height: 80cm Width: 100cm Depth: 80cm

Stainless steel work table with jug- 2x Drawers with sheet metal shelf for 60x40cm sheets Very Robust, Stable and Heavy Height: 87cm Width: 100cm Depth: 80cm

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V

Steel construction - mezzanine, 500kg/m2, floor area approx. 6.440 m2 - used - : Special price ex location: only 350.000.- € (net), incl. disassembly, etc.! Manufacturer: Pro Man Type: Mezzanine Year of construction: 2007 stage load: 500kg/m2 Floor height (upper edge floor covering): 3.462mm Bottom Edge Carrier: 3.230mm Footprint: approx. 92,000 x 70,000mm Stage covering partly chipboard (38mm), partly gratings Accessories: stairs, railings, pallet transfer places, Bottom edge chipboard: white Plan of the stage as PDF on request Condition: very good Available: from about March 2022 Location: CZ

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Trough screw, washing screw, screw conveyor used Conveying length: approx. 6500 mm Diameter: approx. 700 mm Slope: approx. 400 mm Wing height: approx. 210 mm Wing thickness approx. 4 mm Stainless steel Geared motor SEW 3 kW 22 rpm 220/400 V Dimensions approx. 7800 x 1800 x 1800 mm The screw can be converted according to your wishes by our own special machine construction. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Overall size: 2160 x 370 x 140 mm Material quality: ~ S235 (ST32) Weight: 850 kg In stock: 2 pieces

Hand lever section steel scissors make MUBEA type 5 SN / 10 Rfor sheet metal, flat and bar steelKnife length: 175 mmcuts sheets up to: 10 mmFlat material: 80 x 13 mmRound material: 22 mmSquare material: 22 x 22 mmOutside dimensions with base (without lever): 1400 x 350 x 900 mmWeight without base: 106 kgWith- Undercarriage mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel bar shear Fabr. MUBEA-Matic type KFMAV 1300Machine -No: 42982L-profile: 30 x 3 to 180 x 18 mmU-profile: 40 x 4 to 220 mmI-profile: 80 - 220 mmI-PE: 80 - 220 mmFlat iron: 5 x 230 to 180 x 30 mmRound profile: 80 mmSquare profile: 70 mmConnected load: 11 kWExternal dimensions: 2200 x 1000 x 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever shears make NOSSEN type ScDH 10Cutting capacity sheets up to: 10 mmCutting capacity flat material: 50 x 15 mmCutting capacity round tubes: 24 mmCutting capacity square: 22 mmCutting capacity L-steel: 60 x 7 mmCutting capacity T-steel: 60 x 7 mmWith- heavy stable base self-builtused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

We offer you here a used Steel staircase for purchase. Included in delivery are: 01x Steel staircase/ machine step, used Total height: approx. 565 mm Total depth: approx. 600 mm Total width: approx. 950 mm Mesh size: approx. 33 x 33 mm Material color: hot-dip galvanized Step abbreviation: approx. 950 x 300 mm Number of steps: 2 pieces Tread height: approx. 280 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm

Size dia 1500x1900mm

Included in delivery are: 01x Steel beam, used Material color: orange Clear width: approx. 2,645 - 2,700 mm Height box profile: approx. 100 - 110 mm Width box profile: approx. 50 mm Note: - The steel beams can be slightly bent, as well as dents or others Have damage. An agraffe is welded on both sides.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.