carbon steel used for sale

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. container dia: 2800 mm Height: 1500 mm 0: 7825 l with stirrer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m

Description: 2 x Stainless Steel Work Tables Dimensions per table: 1020x620x840mm Weight per table: 45kg Approx. Onsite Dimension. (l x w x h): 1,020 x 620 x 840 mm, weight approx.: 90 kg

Description: Stainless steel kitchen equipment - sink , Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,040 mm, weight approx.: 45 kg

various sizes and thicknesses on 4 pallets, Please note! There are additional costs on this lot, this is €70 per pallet deposit

various sizes and thicknesses on multiple pallets, full plates + leftovers, everything from 1 rack, Please note! There are additional costs on this lot, this is €70 per pallet deposit

various sizes and thicknesses on multiple pallets, full plates + leftovers, everything from 1 rack, Please note! There are additional costs on this lot, this is €70 per pallet deposit

pressure: 60 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120 mm punching cross-cut in cmm: 28 in 15 mm throat: 220 mm flat steel: 300 x 15 mm oil volume: 45 ltr. total power requirement: 4,0 kW weight of the machine ca.: 1.250 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel conveyor screw with geared motor

Material WNr. 1.4301,AISI 304 (V2A),without seals More then 300 machines new and second hand on our seema .de

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Voltage: 220/ 380V, nominal current: 8/ 5A.

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

There are seven stainless steel tables available, dimensions table 1: 1890x800x960mm, table 2: 1490x800x900mm, table 3: 2150x740x840mm, table 4: 1900x800x960mm, table 5: 2900x1200x910mm, table 6: 2200x700x850mm, table 7: 200x800x940mm.

There are two basins available, dimensions basin 1/ 2: 1600x1300x100/ 1000x1100x1000mm, each with a Pump HYDROSTAL.

There are two identical silos available, capacity: 24m³, width: 3000mm, height: 4750mm, was used for storing polycarbonate.

Capacity: 2173l, diameter: 1500mm, height: 1230mm.

Capacity: 6200l, diameter: 2250mm, height: 2400mm.

There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, lantern, barrier pressure system and documentation, the tanks were used for 15 years.

Filling height: 1900mm, capacity: 39,520l, width: 3200mm, height: 2000mm, weight: 5.5t.

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 Rhymes steel external silos Ø 2,800 mm Content 51m³ = 30 tons of flour per silo Height per silo 12,500 mm Silos stand on frame for sale Price on request Phone +49 172 8345457

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Separator tank manufactured by AGUILAR Y SALAS in stainless steel with a capacity of 33 liters. Top bottom type klopper with two flange type tubulatures. Body with two flange-type side tubulatures. Lower bottom type klopper with discharge from the bottom with flange type tubulature. General characteristics: Maker AGUILAR AND ROOMS Material Stainless steel Year of manufacture 2003 Weight 75 kg Design pressure -1/+10 bar Design temperature 200 ºC Test pressure 16.9 bar Capacity 33 L Specifications: Volume 33 L Background type Klopper Upper bottom tubulatures x2 Lateral tubulatures x2 Lower bottom tubulatures x1

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank made of stainless steel by BACHILLER with a total capacity of 380 liters. Top klopper bottom with central flange for agitation, man's mouth and two flange connections. Bottom klopper with discharge from the bottom. On 3 legs General characteristics: Maker BACHELOR Material Stainless steel Year of manufacture 2005 Weight 225 kg BODY Atm design pressure Design temperature 50 ºC Watertight test pressure Volume 380 l Specifications: Volume 380 liters total Background type Klopper Type of agitation Propeller Agitation motor 0.75 kW Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth x1 Outer diameter body 710 mm Body thickness 4 mm Body height 800 mm Body height + backgrounds (TOTAL: 2300 mm) Top bottom thickness 4 mm Lower bottom thickness 4 mm Engine features: Tension 230/400 V Stream ...

Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar

Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM

Tank made of stainless steel with a total capacity of 180 liters (150 useful liters) Folding lid with cancamos for lid closure. With discharge through the background. On 3 legs General characteristics: Material Stainless steel Specifications: Volume 150 liters (180 liters total) Background type Klopper Envelope 3 legs Outer diameter body 545 mm Body height 680 mm (TOTAL: 1050 mm)

Square jacketed stainless steel tank with a total capacity of 25 liters for water bath. Top bottom with manually removable lid. Jacketed body and bottom (approximate capacity: 20 liters) Mounted on stainless steel structure with wheels. General characteristics: Material Stainless steel Specifications: Volume 20 liters (25 liters total) Shirt 20 liters approx Envelope Structure with wheels Outer diameter body 280x260 mm Body height 340 mm

Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)