carbon steel used for sale

General SKUR1205 LocationBarneveld MakeJeger AG (CH) Type4000 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4420 (4000 ltr nett) Vessel sizesdia. 1800x2000mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (1x) Outletdia. 80mm Half coil jacketed(90 Ltr) Max. temperature-30/200 degr. C With propellor stirrercheck Motor2.0 kW 220/380 Volt (Ex) Speed mixing shaft203 rpm. Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.5653 Year of construction1992 Floorspace2.4x2.4 M Total height3,2 M Weight1600 Kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceutic ...

General SKUR1192 MakeKleiser GmbH (DE) LocationBarneveld Type1600 Ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1860 Ltr (nett.1600 Ltr) Vessel sizesdia.1000 x2560mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 3x DN50 OutletDN80 With jacketcheck 23 Ltr. Max. temperature-30/200°C. With propellor stirrercheck Motor1,1kW, 220/380Volt, 1400rpm. (EX) Speed mixing shaft752 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.3071 Year of construction1991 Floorspace1,4x1,4m Total height2,8m Weight650 Kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLub ...

General SKU356S847 MakeEnco Energie Componenten GmbH (AT) LocationBarneveld Type509 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeDN200 Top connectionsDN125, DN100, (3 ...

General SKU345S710 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1250 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume6300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity6300 Ltr. (max. 7700 Ltr.) Vessel sizesdia. 2000x2940 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN150, DN80, DN50 OutletDN80 Half coil jacketedcheck (200 Ltr.) Max. temperature-30/200 °C With paddle stirrercheck (HWL 080-D) Motor15 KW, 400 Volt (EExdeII CT4) Speed mixing shaft62 rpm Information Year of construction1994 Floorspace2,5x2,5 m Total height3 m ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent ...

General SKUR0922 MakeW. Stoecklin AG (CH) Type6300 ltr. LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor13 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8500 Ltr (nett. 6300 Ltr) Vessel sizesdia.2000mm x3050mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections5x DN150, 2x DN250 Outletdia.125mm Half coil jacketed(280 Ltr) Max. temperature-30/200 degr.C. With paddle stirrerEkato EM100 Motor13,5 kW, 380 Volt (EX) Speed mixing shaft6,9-69 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.1333 Year of construction1985 Floorspace2,5x2,5 M Total height3,9 M Weight5000 Kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceutics ...

General SKU212T120 MakeEnco LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN100 OutletDN80 Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck (EKATO, EM 2060) Motor5,5 kW 400 Volt Speed mixing shaft59 rpm Information No.3385/42.1 Year of construction1990 Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigments ...

General SKU253N349 MakeChaudronnerie ABF LocationBarneveld Pressure Working pressure3.9 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactorcheck Capacity2500 Ltr Vessel sizes+/- dia.1400x1300mm Dished bottomcheck Dished top sidecheck Manholedia.350mm Top connectionsdia. (6x)120mm, (1x)200mm With jacketcheck Max. temperature20/250degr.C ,-25gr.C/250degr.C With paddle stirrercheck Motor5,5 KW, 230/380 Volt Information No.K 62 200 Year of construction1992 Mounted on legscheck Floorspace2,0x2,0 MCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & p ...

General SKU212T119 MakeEnco No.3385/50.1 Year of construction1990 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Manholecheck DN450 Top connectionscheckDN50, DN100 OutletDN80 (3x) Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck Motorcheck 5,5 kW, Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMiner ...

General SKUR0919 MakeWalter Stoecklin AG (CH) Type6300 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor13 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity8500 ltr (nett 6300 ltr) Vessel sizesdia. 2000x3050mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections2x DN250, 5x DN150 Outletdia. 125mm Half coil jacketed(280Ltr) Max. temperature-30/200 degr.C. With paddle stirrerEkato EM 100-D Motor13 kW, 380 Volt, (EX) Speed mixing shaft6.9/69 rpm Information No.1331 Year of construction1983 Floorspace2,4x2,4 M Total height4,9 M Weight4500 Kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCo ...

General SKUR0903 MakeWalter Stöcklin AG (CH) Type6300 ltr. LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor11.2 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity8500 ltr (nett 6300 ltr) Vessel sizesdia. 2000x2500mm Dished bottomcheck Dished top sidecheck Manholedia. 580mm, cover is missing Top connectionsdia. 160mm (5x), dia. 265mm (2x) Outletdia. 130mm Half coil jacketed(280 ltr.) Max. temperature-30/200 degr. C With propellor stirrercheck With paddle stirrerEkato EM 100 D Motor3,07/11,2 kW 380 Volt (Ex) (402 / 1465 rpm) Speed mixing shaft19 - 69 rpm Information No.1329 Year of construction1985 Floorspace2,6x2,5 M Total height4,8 M Weight5500 Kg ATEX compat ...

General SKU119S540 MakeJongia TypeLKP-40 No.87146 Year of construction1987 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4.5 Bar Main Features MaterialStainless steel Volume650 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity650 Ltr Vessel sizesdia. 900x1000mm Dished bottomcheck Dished top sidecheck Manholedia. 200mm Top connectionscheck Outletcheck With jacketcheck Max. temperature100°C With paddle stirrercheck Motor1,5 KW, 220/380-420 Volt Speed mixing shaft39-253 Rpm Stainless Steel Reactors MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace1,5x1,3 m Total height2,6 mCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorga ...

Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.

Haffmans/Norit inline carbonator, fo inline adding CO2 to beverages. Only used for R&D activity's. CO2 flowmeter is missing, otherwise in good condition.

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

- Standing glass cylinder - Without pressure reducing station for gas cylinder - Connections: 1 gas

Adsorption system (absorbing plant, absorption system) used for air purification, activated carbon filter and solvent recovery Air filter, odour filter AMEG Type: DAP 4 exSo "Optima" Dimensions approx.: 3400 x 1400 x 2700 mm Control cabinet: 800 x 600 x 1900 mm The plant cleans air from vapours of organic solvents by adsorption mittles activated carbon filter. A more detailed description of the process can be found in the pictures.

Groove electrodes, stick electrodes, carbon joint rods, carbon electrodes - Gouging carbon rods -1/4 x 12 -Dimensions: 250/170/H350 mm -Weight: 9.6kg

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

Carbon brushes, motor carbons, slip ring brush in a set PAGUS M65 1349295 grinding surface: 32 x 16 mm Connection cable: 2 x 80 mm pole shoe: M8 Set consists of 10 carbon brushes ! New ! Dimensions(set): 290 x 80 x 35 mm

Carbon brushes, motor carbons in a set PAGUS G163 grinding surface: 16 x 12.5 mm Connection: 1 x 80 mm pole shoe: M6 Set consists of 10 carbon brushes ! New ! Dimensions(set): 130 x 65 x 25 mm

Carbon brushes, motor carbons, slip ring brush in a set PAGUS M65 grinding surface: 40 x 20 mm connection: 2 x 80 mm pole shoe: M8 Set consists of 4 carbon brushes ! New ! Dimensions(set): 160 x 80 x 40 mm

Carbon brushes, motor carbons, slip ring brush in a set PAGUS G163W 1349759 grinding surface: 32 x 16 mm connection: 2 x 80 mm pole shoe: M8 Set consists of 18 carbon brushes ! New ! Dimensions(set): 270 x 100 x 50 mm

Carbon brushes, motor charcoal, slip ring brush in set PAGUS G163W 1349759 grinding surface: 32 x 16 mm Connection: 2 x 80 mm pole shoe: M8 Set consists of 10 carbon brushes ! New ! Dimensions(set): 150 x 100 x 50 mm

Carbon brushes, motor carbons in a set PAGUS G187 grinding surface: 32 x 16 mm Connection: 2 x 80 mm pole shoe: M6 Set consists of 6 carbon brushes ! New ! Dimensions(set): 130 x 100 x 40 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connectors set consists of 10 carbon brushes ! New !' Dimensions(Set): 120 x 60 x 50 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connectors set consists of 30 carbon brushes ! New !' Dimensions(Set): 240 x 90 x 40 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connectors Set consists of 50 carbon brushes ! New !' Dimensions(Set): 220 x 200 x 50 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connector set consists of 100 carbon brushes ! New !' Dimensions(set): 220 x 220 x 60 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) grinding surface: 16 x 10 mm Connection: 1 x 60 mm connectors Set consists of 20 carbon brushes ! New ! Dimensions(set): 150 x 100 x 30 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) grinding surface: 16 x 10 mm connection: 1 x 60 mm connectors set consists of 200 carbon brushes ! New ! Dimensions(set): 220 x 220 x 70 mm

Carbon brushes, motor carbons in a set PAGUS EG8067J CARBONE 323250Z grinding surface: 32 x 32 mm connection cable: 4 x 120 mm pole shoe: M8 Set consists of 10 carbon brushes ! New !' Dimensions(set): 200 x 160 x 80 mm

Carbon brushes, motor carbons, slip ring brush in a set PAGUS G158 grinding surface: 40 x 20 mm Connection cable: 2 x 70 mm pole shoe: M6 Set consists of 10 carbon brushes ! New ! Dimensions(set): 200 x 150 x 40 mm

Carbon brushes, motor carbons, slip ring brush in a set PAGUS EAi grinding surface: 50 x 25 mm connection cable: 2 x 70 mm pole shoe: M8 Set consists of 4 carbon brushes ! New ! Dimensions(set): 150 x 100 x 50 mm

Carbon brushes, motor carbons, slip ring brush in a set EKL, ELECTROCARBON LICHTENBERG M61 Grinding surface: 50 x 15 mm Connection cable: 1 x 70 mm Pole shoe: M8 Set consists of 5 carbon brushes ! New ! Dimensions(set): 160 x 80 x 40 mm

The Moravek BC15 is a single column carbonator designed for inline pre carbonation of beer or Cider (as well as mineral water) prior to counterpressure filling. Carbonation range 2g/litre to 8g/litre. This carbonator can be used for automatic saturation or re-saturation of water, mineral water, wine, juices, pre-mixed drinks and beer.

Output: 15000 U/h // Bottle Size: 1500 ML

Output: 9000 U/h // Bottle Size: 5ml-2l

Compressed Air Adsorption Dryer, Activated Carbon Adsorber with Secondary Filter BOGE Type DAZ 5-2For Particularly Dry AirFabr. No. 38315449 year of construction 2013Volume flow max. 250 litres/min. = 15 m³/hOperating pressure max. 16 barConnection thread G 1/4? Mains connection 230 volts, 50 Hz- pre- and post-olderSpace requirements L x W x H 400 x 210 x 580 mmWeight 15 kgGood condition; used

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.

Co² Carbonation Plant = Year of construction 2022 Performance values: Nominal output (at 10 degrees C) 650 kg/h liquid CO² is verdamot fund recycling Concrete granules added to reduce the environmental footprint consists of the components marked below: 1 Silo 4135 2 Gas pipeline 3 Hoppers 4 control cabinets electronics 5 Fuel parking space for refueling 6 Vaporizers 7 Collision protection 8 Co² Tank

Complete PET Bottle Filling Line for Carbonated Soft Drinks Manufacturer: SIPA / PROCOMAC Year of Manufacture: 2009 Location: Germany Availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: Capacity: Approx. 12,500 bottles per hour Bottle Sizes: 500 ml, 750 ml, 1,500 ml Neck Finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) Equipment & Features: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system, incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper, incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the filler, incl. ...

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 13.0x355 mm -Identification number: 515.0020 -Quantity: 5 packages available -Price: per package -Transport dimensions: 365/140/H75 mm -Weight: 4.6 kg/package

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 8.0x305 mm -Identification number: 515.0018 -Quantity: 10 packages available -Price: per package -Transport dimensions: 320/90/H50 mm -Weight: 1.6 kg/package

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 6.5x305 mm -Identification number: 515.0017 -Quantity: 5 packages available -Price: per package -Transport dimensions: 320/80/H45 mm -Weight: 1.3 kg/package

• Model: Speedlock CF HD (Heavy Duty) • Material: High-quality carbon (carbon fiber) – extremely torsion-resistant and lightweight • Connection: 100mm half shell (suitable for all common professional fluid heads) • Special feature: Thanks to the Speedlock system, both pull-outs can be adjusted in a flash with just one lever per leg • Condition: Used and in very good condition. Technically flawless. The clamps hold bombproof. Includes ground spreader for maximum stability Auction-ID: A7-45427-14

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils