carbon steel used for sale

Upholstered chair with cognac-coloured faux leather upholstery, integrated armrests and black metal frame. Suitable as a visitor chair, conference chair, dining chair, reception chair or chair for office and lounge areas. Auction-ID: A1-49989-91

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 8 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-22

Chair with black metal cantilever frame, upholstered black seat and backrest with mesh/mesh covering. Suitable as a visitor chair, conference chair, seminar chair or chair for waiting, office and meeting areas. Auction-ID: A1-49989-93

Steelcase Ace Lounge Chair Wooden base: H98.5 cm x W65 cm x D79 cm Seat height: 40 cm Seat depth: 48 cm Auction-ID: A1-49989-46

Dutch production; free span; trusses c.o.h. 5100mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE 300; 2 sets of IPE 200/180 end frames with wind posts, 1 set of which is equipped with a UNP180 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-4

Upholstered bench with metal frame – grey/ baige Auction-ID: A1-49989-101

New Steel construction 12 m x 20 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 5,2 m Wide – 2 m Hight – 1 m Auction-ID: A1-49902-29

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-2

Swivel chair with upholstered seat, armrests and brown faux leather cover. Equipped with a chrome-plated 4-star base. Suitable as a visitor chair, conference chair, lounge chair, reception chair or dining chair. Auction-ID: A1-49989-89

New Steel construction 18 m x 35 m Galvanised steel Side column 7 m high The structure is made of IPE 240 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 9,5 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-49902-14

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 4170 and 5010, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Z-profiles for the roof and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 7,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-49902-16

3 Steelcase Node Seminar Chair with Table in Grey. Images are for reference only, actual color may vary depending on screen and light. Auction-ID: A1-49989-67

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41459-30

2 Upholstered lounge chair with red fabric cover, wraparound backrest, armrests and separate seat cushion. Equipped with a swivel metal frame and chrome-plated 4-star base. Suitable for reception areas, offices, waiting areas, meeting rooms, lounges or lounge areas. Auction-ID: A1-49989-90

Material: 304 stainless steel Capacity: 150 hL (15,000 litres) Configuration: vertical cylindrical tank, flat bottom with box Diameter: 2800 mm Height: 4000 mm Roof: 2 lifting rings, 1 chimney with hatch Ferrule: 1 ladder support bar, 1 door rung, 1 rectangular door with external opening, 1 taster tap Bottom: flat with box, 1 stainless steel total drain valve on square flange, 1 sludge without cap Description: stainless steel vinification and storage tank, simple and robust design. Brushed stainless steel exterior with some marks of use and handling, clean interior. Solution immediately usable to complete an existing winery. Location: Civray site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment, sold as is Auction-ID: A1-49695-256

free span; trusses 5.00 meters; roof slope 15 degrees; consists of 7 sets of intermediate trusses with IPE240 uprights and trusses; 2 sets of end frames with wind posts in IPE160; including steel drawing; 3D drawing; 28 pieces of pressure tubes; 2 sections of wind bracing; 2 compartments of cross braces; purlin lips between the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-11

free span of canopy construction; trusses c.o.h. 5000mm; front height 4450mm, rear height 3650mm; 4 sets of intermediate trusses HEA140; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-14

2 pieces Steelcase Node seminar chair with table in yellow. Images are for reference only, actual color may vary depending on screen and light. Auction-ID: A1-49989-66

Decorative table fireplace in modern stainless steel and glass design. The fireplace consists of a stainless steel burner with all-round glass panes and is intended for use with suitable fuel. Auction-ID: A1-49989-136

Steelcase Cavatina Four-legged Caster Auction-ID: A1-49989-97

New Steel construction 12 m x 44 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 6,2 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-49902-11

New Steel construction 14 m x 40 m Galvanised steel Side column 5 m high The structure is made of IPE 180 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 7,2 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-49902-17

New Steel construction 10 m x 20 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 5,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-49902-24

New Steel construction 14 m x 60 m Galvanised steel Side column 5 m high The structure is made of IPE 180 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 7,2 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-49902-23

7 Steelcase Node Seminar Chair with Table in Orange. Images are for reference only, actual color may vary depending on screen and light. Auction-ID: A1-49989-68

Modern decorative table fireplace with black metal frame, stainless steel burner insert and side glass panels. The fireplace is freestanding and intended for decorative use indoors. Auction-ID: A1-49989-138

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 4170 and 5010, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 7,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-49902-32

New Steel construction 20 m x 45 m Galvanised steel Side column 7 m high The structure is made of IPE 270 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 10,5 m Wide – 2,3 m Hight – 2 m Auction-ID: A1-49902-33

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 6 sets of intermediate trusses IPE 270/220; 2 sets of IPE 180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41459-6

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Z-profiles for the roof and fastening bolts, screws, and nuts are not included. Space need for loading Lenght – 6,2 m Wide – 2 m Hight – 1,2 m Auction-ID: A1-49902-4

Steel plate and chain belt conveyor belt Manufacturer: FMW Förderanlagen GmbH Year of construction: approx. 2019 Total length approx. 45,000 mm Width: approx. 2000 mm For sale here is a steel plate and chain belt conveyor belt with a total length of approx. 45 m and a width of approx. 2 m. For exact data, please refer to the drawing. The conveyor belt is currently still set up and can be visited on request. Disassembly is not included in the price.

Steel structure: • 8 roller doors: 3 x 3 meters • 8 loading pits (loading docks) with flaps, collision protection and shock absorbers Ideal for transport companies, distribution, storage or as an extension of your current business. The warehouse is fully functional and equipped with all necessary charging facilities. Condition: • The shed has been dismantled and is ready for transport. Auction-ID: A1-47416-250

Note: This listing is for the Storage Tent 30 x 85 x 15 ft (approx. 9.15 x 26.00 x 4.50 m), model 308515R . In a separate auction, another storage tent measuring 30 x 65 x 15 ft will also be offered. Please note that these are two different sizes and separate auctions. Robust storage tent in industrial design with galvanized steel construction and durable PE tarpaulin. Ideal as a warehouse, machine shelter, vehicle shelter or construction site warehouse. The kit is in its original packaging in the transport rack. ✔ Highlights ✅ Model 306515R ✅ Dimensions: approx. 9.15 x 26.00 x 4.50 m (30 x 85 x 15 ft) ✅ Robust round arch steel construction ✅ Galvanized steel pipes for high corrosion resistance ✅ Durable 300 g/m² PE fabric tarpaulin ✅ Large driveway with roller door ✅ Ideal for agriculture, commerce, industry and construction sites ✅ Supplied a ...

Brand : CHALVIGNAC Material : stainless steel Capacity : 165 hL (16 500 litres) Configuration : vertical cylindrical tank, flat bottom Diameter : 2600 mm Height : 3800 mm Roof : 1 chimney with stainless steel hatch, 1 footbridge support Ferrule: 1 ladder support bar, 1 rectangular door flush with the bottom, 1 tap and level ruler, 1 taster tap, 1 pumping column Bottom: flat, 1 total drain valve with decanter elbow and filtration grid Description: stainless steel storage tank stored outside on pallets, pumping column and walkway support in the upper part. Brushed stainless steel exterior with marks and handling blows. Suitable for storing liquids in a wine-growing environment. Location: Civray site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment, sold as is Auction-ID: A1-49695-271

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Brand: RURALINOX Year: 2005 Material: stainless steel Capacity: 155 hL (15,500 litres) Configuration: closed vertical cylindrical tank, conical bottom with triangular box, on stainless steel legs Diameter: 2450 mm Total height: 4000 mm Roof: closed tank Ferrule: 1 rectangular door with external opening positioned 1450 mm from the ground, 1 door bar, 1 taster tap, 1 partial steel drain valve on square flange Bottom: conical with triangular box, 1 steel total drain valve on square flange, stainless steel feet Description: stainless steel storage tank installed in a battery under the building, rectangular door with porthole, RURALINOX manufacturer's plate on the ferrule. Brushed stainless steel exterior with traces of use. Suitable for the storage of liquids in wine and agri-food environments. Location: Pauillac site (France) Loading: at the expense of the buyer, not included in the price ...

Professional dishwashing area with Rhima dishwasher and stainless steel workbenches Features: 1 Rhima DR60 rack dishwasher 1 stainless steel feed sink, dim. approx. 75 x 160 cm 1 stainless steel drainage table, dim. approx. 75 x 105 cm Pull-out flush valve 1 stainless steel workbench with waste hole, dim. approx. 160 x 70 x 75 cm 1 stainless steel workbench in corner unit, dim. approx. 200 x 270 x 85 cm 1 Gamko refrigerator, dim. approx. 200 x 51 x 85 cm 1 stainless steel workbench, dim. approx. 160 x 70 x 71.5 cm Particularities: Concerns a professional catering dishwashing/kitchen setup Auction-ID: A1-47444-73

Specifications: Version: Upright stainless steel refrigerator Dimensions: approx. 138 x 215 x 82 cm Features: Stainless steel housing Double door Integrated cooling installation Digital temperature control Internal shelves Auction-ID: A1-47444-75

Brand : CHALVIGNAC Material : stainless steel Capacity : 165 hL (16 500 litres) Configuration : vertical cylindrical tank, flat bottom Diameter : 2600 mm Height : 3800 mm Roof : 1 chimney with stainless steel hatch, 1 footbridge support Ferrule: 1 ladder support bar, 1 rectangular door flush with the bottom, 1 tap and level ruler, 1 taster tap, 1 pumping column Bottom: flat, 1 total drain valve with decanter elbow and filtration grid Description: stainless steel storage tank stored outside on pallets, pumping column and walkway support in the upper part. Brushed stainless steel exterior with marks and handling blows. Suitable for storing liquids in a wine-growing environment. Location: Civray site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment, sold as is Auction-ID: A1-49695-270

Professional stainless steel catering refrigerated / workbenches and work island Features: 1 Combisteel stainless steel cooling/workbench with 4 drawers, dim. approx. 90 x 70 x 80 cm 1 Gamko 2-door refrigerator, dim. approx. 110 x 90 x 90 cm 1 Palux L-shaped stainless steel cooling/workbench with 3 drawers and 1 cabinet, dim. approx. 255 x 270 x 80 cm 1 Palux stainless steel refrigeration/work island, dim. approx. 128 x 135 x 100 cm 1 stainless steel L-shaped workbench with sink, tap and 1 drawer, dim. approx. 210 x 164 x 85 cm 1 Water hose snack with gun Particularities: This is a professional stainless steel catering kitchen setup as shown NOTE: lot must be dismantled by the buyer himself Buyer must take care of disassembly and disposal himself Auction-ID: A1-47444-72

Brand: MANGEARD Year: 1998 Material: stainless steel Capacity: 155 hL (15,500 litres) Configuration: vertical cylindrical tank, conical bottom with box, on stainless steel legs Diameter: 2450 mm Total height: 4000 mm Roof: 1 chimney chimney Ferrule: 1 ladder support bar, 1 door rung, 1 rectangular door with external opening, 1 taster tap, 1 stainless steel partial drain valve on square flange Bottom: conical with box, 1 stainless steel total drain valve on square flange, 1 sludge, stainless steel feet Description: stainless steel storage tank installed in a battery under the building, brushed exterior finish, identification plate on the ferrule, door handle and stainless steel taps. Suitable for the storage of liquids in the wine and agri-food environment. Location: Pauillac site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment,  ...

Multifix steel bracket base body Size D1 complete with 2 steel brackets Auction-ID: A7-49782-484

Note: This listing is for the storage tent 30 x 65 x 15 ft (approx. 9.15 x 20.00 x 4.50 m), model 306515R . In a separate auction, another storage tent measuring 30 x 85 x 15 ft will also be offered. Please note that these are two different sizes and separate auctions. Robust storage tent in industrial design with galvanized steel construction and durable PE tarpaulin. Ideal as a warehouse, machine shelter, vehicle shelter or construction site warehouse. The kit is in its original packaging in the transport rack. ✔ Highlights ✅ Model 306515R ✅ Dimensions: approx. 9.15 x 20.00 x 4.50 m (30 x 65 x 15 ft) ✅ Robust round arch steel construction ✅ Galvanized steel pipes for high corrosion resistance ✅ Durable 300 g/m² PE fabric tarpaulin ✅ Large driveway with roller door ✅ Ideal for agriculture, commerce, industry and construction sites ✅ Supplied a ...

Material: 304 stainless steel Capacity: 150 hL (15,000 litres) Configuration: vertical cylindrical tank, flat bottom with box Diameter: 2800 mm Height: 4000 mm Roof: 2 lifting rings, 1 chimney with hatch Ferrule: 1 ladder support bar, 1 door rung, 1 rectangular door with external opening, 1 taster tap Bottom: flat with box, 1 stainless steel total drain valve on square flange, 1 sludge without cap Description: stainless steel vinification and storage tank, simple and robust design. Brushed stainless steel exterior with some marks of use and handling, clean interior. Solution immediately usable to complete an existing winery. Location: Civray site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment, sold as is Auction-ID: A1-49695-255

Brand : CHALVIGNAC Material : stainless steel Capacity : 165 hL (16 500 litres) Configuration : vertical cylindrical tank, flat bottom Diameter : 2600 mm Height : 3800 mm Roof : 1 chimney with stainless steel hatch, 1 footbridge support Ferrule: 1 ladder support bar, 1 rectangular door flush with the bottom, 1 tap and level ruler, 1 taster tap, 1 pumping column Bottom: flat, 1 total drain valve with decanter elbow and filtration grid Description: stainless steel storage tank stored outside on pallets, pumping column and walkway support in the upper part. Brushed stainless steel exterior with marks and handling blows. Suitable for storing liquids in a wine-growing environment. Location: Civray site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment, sold as is Auction-ID: A1-49695-272

Brand: RURALINOX Year: 2005 Material: stainless steel Capacity: 155 hL (15,500 litres) Configuration: closed vertical cylindrical tank, conical bottom with triangular box, on stainless steel legs Diameter: 2450 mm Total height: 4000 mm Roof: closed tank Ferrule: 1 rectangular door with external opening positioned 1450 mm from the ground, 1 door bar, 1 taster tap, 1 partial steel drain valve on square flange Bottom: conical with triangular box, 1 steel total drain valve on square flange, stainless steel feet Description: stainless steel storage tank installed in a battery under the building, rectangular door with porthole, RURALINOX manufacturer's plate on the ferrule. Brushed stainless steel exterior with traces of use. Suitable for the storage of liquids in wine and agri-food environments. Location: Pauillac site (France) Loading: at the expense of the buyer, not included in the price ...

Krone EasyCut 280 CV mowing conditioner – 2007 – 2.80 m – steel conditioner fingers Specifications: Brand/type: Krone EasyCut 280 CV Year of construction: 2007 Serial Number: 733401 Working width: approx. 2,800 mm Transport width: approx. 3,000 mm Number of cutting discs: 4 Number of mower drums: 2 Conditioner: steel conditioner fingers Conditioner speed: approx. 600/900 rpm Power requirement: approx. 51 kW / 70 hp Coupling: Cat. II Own weight according to specification: approx. 1,200 kg Dimensions as specified: approx. 4,000 × 2,000 × 1,000 mm Features: Center suspension Mechanical spring relief Hydraulically Folding Guards Associated PTO shaft Auction-ID: A1-47389-196

Brand: MANGEARD Year: 1998 Material: stainless steel Capacity: 155 hL (15,500 litres) Configuration: vertical cylindrical tank, conical bottom with box, on stainless steel legs Diameter: 2450 mm Total height: 4000 mm Roof: 1 chimney chimney Ferrule: 1 ladder support bar, 1 door rung, 1 rectangular door with external opening, 1 taster tap, 1 stainless steel partial drain valve on square flange Bottom: conical with box, 1 stainless steel total drain valve on square flange, 1 sludge, stainless steel feet Description: stainless steel storage tank installed in a battery under the building, brushed exterior finish, identification plate on the ferrule, door handle and stainless steel taps. Suitable for the storage of liquids in the wine and agri-food environment. Location: Pauillac site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment,  ...

Features: Various Palux stainless steel refrigerated / workbenches and work islands Combisteel stainless steel cooling/workbench Various Gamko coolers Ecofrost cooler/workbench Palux frying unit Palux neutral unit Palux WS stainless steel warming/workbench, year of construction 2019 2 Gruko hot plates Stainless steel extractor hood, length approx. 410 cm Nu-Air control box for extraction system Rhima DR60 rack dishwasher Stainless steel inlet and drain sinks Pull-out flush valve Various stainless steel workbenches Stainless steel L-shaped workbenches Sink with tap Various cooling drawers, drawers and cupboard spaces Particularities: This is a combination lot consisting of 3 separate catering lots Extensive professional stainless steel catering kitchen and sink setup as shown on the underlying plots PLEASE NOTE: installation and kitchen parts ...

Brand: MANGEARD Year: 1998 Material: stainless steel Capacity: 155 hL (15,500 litres) Configuration: vertical cylindrical tank, conical bottom with box, on stainless steel legs Diameter: 2450 mm Total height: 4000 mm Roof: 1 chimney chimney Ferrule: 1 ladder support bar, 1 door rung, 1 rectangular door with external opening, 1 taster tap, 1 stainless steel partial drain valve on square flange Bottom: conical with box, 1 stainless steel total drain valve on square flange, 1 sludge, stainless steel feet Description: stainless steel storage tank installed in a battery under the building, brushed exterior finish, identification plate on the ferrule, door handle and stainless steel taps. Suitable for the storage of liquids in the wine and agri-food environment. Location: Pauillac site (France) Loading: at the expense of the buyer, not included in the price Condition: second-hand equipment,  ...