carbon steel used for sale

Thickness: 2.5 mm.

Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging

floor plate size 100x100 cm

Galvanized steel; IPE 100

1x HEA beam 20x20x679cm, 2x H-beam 20x19x1065cm

Thickness: 2.5 mm.

Thickness: 3 mm.

Grinding wheel diameter: approx. 60 mm

Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives

T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

Thickness: 2.5 mm.

Thickness: 3 mm.

Galvanized steel; length approx 9000mm

Thickness: 3 mm.

Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Stainless Steel Elevator

Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm

The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call

max. container dia: 2800 mm Height: 1500 mm 0: 7825 l with stirrer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 2.5 mm.

Thickness: 2.5 mm.

One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

Stainless Steel Pump GRACO pneumatic / 4 Ball

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Stainless steel shelf PAGUS 1280 x 550 x 890 mm with transparent cover plate and a plastic base Dimensions: 1280 x 550 x 890 mm

Stainless steel cylinder, pneumatic cylinder, double-acting FESTO CRDNG-32-125-PPVA 160884 UN08 stroke 125 mm rod diameter Ø 12 mm Dimensions: 510 x 55 x 27 mm

Stainless Steel Control Box, Control Cabinet PAGUS 600 x 210 x 480 mm Dimensions: 600 x 210 x 510 mm

Control cabinet PAGUS 2 doors stainless steel control cabinet Dimensions: 800 x 400 x 1975

Steel bottle cart PAGUS for 10 - 40 liter bottles bottles Ø max 240 mm Dimensions: 750 x 770 x 1340 mm

Stainless Steel Basket, Dipping Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 10 x 10 mm Stainless Steel ! Dimensions: 500 x 330 x 400 mm

Stainless Steel Basket, Dipping Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 12 x 12 mm Stainless Steel ! solid design ! Dimensions: 500 x 330 x 400 mm

Stainless Steel Basket, Immersion Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 10 x 10 mm Stainless Steel ! Dimensions: 500 x 330 x 400 mm

MIG Stainless Steel Welding Wire PAGUS DT 1.4316 AWS 308LSi Diameter: Ø 1.0 mm coil K300 Quantity: 12 kg New ! Dimension: 300 x 300 x 105 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG Si 1.4576 Diameter: Ø 1.0 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Stainless Steel Welding Wire BÖHLER SAS2-IG 1.4551 Diameter: Ø 1.2 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG 1.4576 Diameter: Ø 1.6 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

Flange Ball Valve PAGUS DIN3357-F2D stainless steel ! FK DN50 PN40 Dimensions: 150 x 220 x 165 mm

Ball valve WHITEY SS-45S12MM 172 bar diameter: 10 mm stainless steel ! Dimensions: 120 x 80 x 40 mm

Ball valve WHITEY SS-43S8MM 207 bar diameter: 4.7 mm stainless steel ! Dimensions: 65 x 50 x 25 mm

Stainless Steel Ball Valve, Two-Way Ball Valve FK ZR1543 DN15 PN40 1.4408 V4A ! flange: Ø 94 mm Dimensions: 250 x 130 x 94 mm

Stainless Steel Control Box, Control Cabinet PAGUS 6AV3515-1MA22-1AA0 with Control Panel SIEMENS Operation Panel Coros OP 15-C2 SIEMENS Bus Terminal RS485 6GK1500-0AB00 used, tested ! Dimensions: 785 x 180 x 885 mm

Stainless Steel Filter Press Manufacturer : Seitz Type: 40x40 Technical specifications : Stainless Steel Filter Press 40x40 4 filter plates 2 end plates VA Length 1,200 mm (for 12 plates) Wheel-to-wheel width 720 mm

Stainless Steel Control Box, Control Cabinet PAGUS 600 x 245 x 775 mm ( 600x245x775mm ) with control panel SIEMENS Operation Panel Coros OP 15-C1 6AV3515-1MA20-1AA0 SIEMENS 6ES7 214-1AC01-0XB0 6ES7 223-1HF00-0XA0 Dimensions: 600 x 245 x 775 mm

Filter press stainless steel Manufacturer : Seitz Type: A20 Z Technical specifications : Stainless Steel Filter Press 4x filter plates 2x End Plates

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors without side walls can be combined with S377 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors one side wall can be combined with S376 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm