carbon line used for sale

Carbon brushes, motor carbons, slip ring brush in a set EKL, ELECTROCARBON LICHTENBERG M61 Grinding surface: 50 x 15 mm Connection cable: 1 x 70 mm Pole shoe: M8 Set consists of 5 carbon brushes ! New ! Dimensions(set): 160 x 80 x 40 mm

Compressed Air Adsorption Dryer, Activated Carbon Adsorber with Secondary Filter BOGE Type DAZ 5-2For Particularly Dry AirFabr. No. 38315449 year of construction 2013Volume flow max. 250 litres/min. = 15 m³/hOperating pressure max. 16 barConnection thread G 1/4? Mains connection 230 volts, 50 Hz- pre- and post-olderSpace requirements L x W x H 400 x 210 x 580 mmWeight 15 kgGood condition; used

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 13.0x355 mm -Identification number: 515.0020 -Quantity: 5 packages available -Price: per package -Transport dimensions: 365/140/H75 mm -Weight: 4.6 kg/package

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 8.0x305 mm -Identification number: 515.0018 -Quantity: 10 packages available -Price: per package -Transport dimensions: 320/90/H50 mm -Weight: 1.6 kg/package

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 6.5x305 mm -Identification number: 515.0017 -Quantity: 5 packages available -Price: per package -Transport dimensions: 320/80/H45 mm -Weight: 1.3 kg/package

A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

The Moravek BC15 is a single column carbonator designed for inline pre carbonation of beer or Cider (as well as mineral water) prior to counterpressure filling. Carbonation range 2g/litre to 8g/litre. This carbonator can be used for automatic saturation or re-saturation of water, mineral water, wine, juices, pre-mixed drinks and beer.

Activated carbon filter for the treatment of drinking water after treatment with chlorine dioxide, with pressure gauge and various connections., Additional title: drinking water treatment, Volume: 2250 l, Max. working temperature: 120 °C, Max. working pressure: 6 bar, Width: 1 m, Height: 3,5 m, Weight: 300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: pressure gauge, various connections

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-48581-673

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-48581-804

The LPCF12 170 is a 12V/170Ah VRLA Lead Carbon front-terminal battery, developed for stable performance and long life. Thanks to Lead Carbon technology, this battery offers an improved cyclic life over conventional AGM solutions and maintains low internal resistance, ensuring reliable performance at high currents. Key features: Designed lifespan up to 15 years at 25°C, suitable for long-term deployment. Excellent cyclic performance, including high durability at partial and deeper discharges. Carbon-enriched plate construction, which contributes to efficient charge intake and electrical stability. Reliable performance with high charge and discharge currents. Robust internal construction for safety, consistent performance and operational reliability. The battery is specified for use within a wide temperature range and features a closed, maintenance-free VRLA construction. All technical ...

The LPCF12 170 is a 12V/170Ah VRLA Lead Carbon front-terminal battery, developed for stable performance and long life. Thanks to Lead Carbon technology, this battery offers an improved cyclic life over conventional AGM solutions and maintains low internal resistance, ensuring reliable performance at high currents. Key features: Designed lifespan up to 15 years at 25°C, suitable for long-term deployment. Excellent cyclic performance, including high durability at partial and deeper discharges. Carbon-enriched plate construction, which contributes to efficient charge intake and electrical stability. Reliable performance with high charge and discharge currents. Robust internal construction for safety, consistent performance and operational reliability. The battery is specified for use within a wide temperature range and features a closed, maintenance-free VRLA construction. All technical ...

The LPCF12 170 is a 12V/170Ah VRLA Lead Carbon front-terminal battery, developed for stable performance and long life. Thanks to Lead Carbon technology, this battery offers an improved cyclic life over conventional AGM solutions and maintains low internal resistance, ensuring reliable performance at high currents. Key features: Designed lifespan up to 15 years at 25°C, suitable for long-term deployment. Excellent cyclic performance, including high durability at partial and deeper discharges. Carbon-enriched plate construction, which contributes to efficient charge intake and electrical stability. Reliable performance with high charge and discharge currents. Robust internal construction for safety, consistent performance and operational reliability. The battery is specified for use within a wide temperature range and features a closed, maintenance-free VRLA construction. All technical ...

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

General Description Automatic bun making line manufactured by Fortuna , designed for the production of Kaiser rolls and similar bakery products. The modular line consists of a dough divider, dough rounder, intermediate proofer, and conveyor sections, providing automated dividing, rounding, proofing, and conveying of dough pieces with a product weight of up to 120 g . The exact model could not be identified from the available photographs. Technical Details Manufacturer: Fortuna Model: Not visible Machine type: Automatic bun making line Configuration:   - Dough divider   - Dough rounder   - Intermediate proofer (vertical chain type)   - Conveyor sections Product: Kaiser rolls and similar buns Maximum dough piece weight: Up to 120 g Condition: Used Condition Overall good used industrial condition. Stainless steel food-contact surfa ...

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

Pastry Line Refurbishment Line Rondo Jumbolino SPF 610 C Year of Make: 2002 Condition: functional Incl. cutting rollers, folding shoes, accessories, etc. Double cutting station Residual dough/waste marker with collection container Sprayer Pneumatic Filling Device Spreading device Roll-up Guillotine Belt travel direction left Belt width approx. 640 mm Total length approx. 8250 mm 

equipped with dough portioning machine with feed hopper; dough band former; centering band; multiroller; cross roller; working width approx. 1050 mm; calibration station; dough strips cutter; guillotine cutting station; long maker and decoration spreading station; incl. control box; Hygiene lock and various accessories Auction-ID: A1-46854-1

Auction-ID: A1-48386-522

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

An entire line for sale