133,386 used machines on RESALE, but how to find them? Machine Search
X-travel 420 mm YWeg 270 mm Table size 254 x 482 mm Projection 254 / 318 mm Grinding spindle speeds 12 - 60,000 rpm Spindle stroke 92 mm Spindle speeds 90, 136, 184, 280 rpm Stroke rate, adjustable 2 - 120 strokes at 51 mm Accuracy 1.25 μm at 30 mm Compressed air connection 7 bar Machine weight approx. 1700 kg Dimensions approx. 1.45 x 1.2 x 2.4 m
grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm max. workpiece weight between centres: 250 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine mit sehr wenigen Betriebsstunden nach Überholung beim Karstens Fachbetrieb. Zustellsteuerung Jetter Digitalanzeige Innenschleifvorrichtung Reitstock mit Zylindrizitätsfeinverstellung Hydraulische Reitstockpinole Etc... Luftkissenschnellverstellung Schleifspindelstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 400 mm grinding length: 1000 mm centre height: 200 mm control: Fanuc 0i-F workpiece weight: 100 kg travel -z axis: 1150 mm measuring system resolution capability: 0,0001 mm rapid traverse: 20 m/min travel -x axis: 365 mm rapid traverse: 20 m/min grinding wheel size: 500 x 80 mm b-axis indexing accuracy +/-: 1 ° spindle motor: 7,5 kW workpiece turning speeds: 1 - 100 U/min grinding head swivelling: 240 Grad tail stock: taper in tailstock MT: 4 tailstock quill stroke: 49 mm total power requirement: - kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,4 x 2,2 m 3-axis cylindrical grinding machine equipped with: - CNC control Fanuc 0iF - B-axis - Coolant belt filter system - Tail stock - UR grinding head for internal, external and surface grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice
These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive
Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...
Tripet TST201CNC nr 3520.17.137 BJ.1987
Inv. Num. : 8806 Type: XZMP 3150/16 Producer: PIESOK Created: 1982 Parameters: Working length rollers: 3150 mm Max. sheet thickness: 16 mm Number of driven rollers: 3 pieces Weight: 40000 kg
Bending length: 4200 mm pre-bending: 34 mm Bending strength: 38 mm power capacity: kW Number of rollers: 4 Stk Adjustable rollers: Stk diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 365 mm work speed: 0 - 8 m/min total power requirement: 55 kW weight of the machine ca.: 35 t Control: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 m Equipped with: - Haeusler BENDtronic 2.0 control system - Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending on springback) - Roller bearings: Self-adjusting roller bearings - Max. cylinder force against upper roller: 3,245kN - Roller material: 42CrMo4 (1.7225) - Speed compensation between upper and lower roller: automatic when the two-roller drive option is selected - Roller adjustment: hydraulic - Tilting of the lower roller and both side rollers for cone bending: infini ...
Key data: 2540 mm, 8 mm
Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Upper roller diameter: 200 mm Clockwise and counterclockwise rotation via footswitch Safety rope hoist Conical rounds possible Motorized rear roll infeed Lower roll feed via handwheel with position indicator Weight: approx. 4,500 kg
grinding diameter: 360 mm grinding length: 3000 mm centre height: 180 mm total power requirement: 17 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Properties: Volume 110 L Material V2A (AISI 304) 1.4301 Horizontal design Total height 500 mm Depth 900 mm Width 400 mm Exterior Surface 2B=IIIC Surface inside 2B=IIIC Description MJ UNI-DIV In front: Threaded Socket DN 25 Manhole 100 x 160 mm oval Sewage drain DN 25 Airlock top 40 mm
workpiece diameter: 1000 mm workpiece weight: - kg workpiece height: - mm Control: grinding wheel motor: 11 kW total power requirement: 25 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4100 x 3200 x 2600 mm Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1500 mm centre height: 180 mm weight of the machine ca.: 3,9 t dimensions of the machine ca.: L: 4900 x 1650x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1050x850x1300 mm Weight: 420 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x1000x1350 mm Weight: 420 kg Total power requirement: 2,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 920x760x1000 mm Weight: 250 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x900x1400 mm Weight: 680 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / ...
Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers
Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers
Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers
Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers
Key data: 610 mm, 500 t
From MTrent Machining Centers UE 110-5A Year of construction 2012 Diameter 610 mm With extended clamping surface 1100 x 610 mm Weight 850 kg
grinding length: 160 x 400 mm mechanical: ja weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter of bending rollers 550 mm Drive Type Hydraulic Main motor power30 kW
Round feeder for dosing difficult-to-flow materials, trough diameter: 950 mm, trough height: 800 mm, trough capacity: approx. 0.5 m³, plate diameter: 1,200 mm; discharge via 3-arm soil agitator with wall-mounted scraper and adjustable pusher / weir. Drive via SEW adjustable gear motor with 5.5 kW. Workshop overhauled in 2017 by Belgian specialist company, not used since then.
internal diameter: 99999 mm grinding depth: 99999 mm swing diameter: 99999 mm grinding diameter: 99999 mm grinding length: 200 mm centre height: 175 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle speed-12000 rpmSpindle ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel
plate thickness: 1,7 mm roll diameter: 50 mm Dimensions (L/W/H): 1600 x 600 x 1500 mm weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.
max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg
Round end tenoner with 2 benches BALESTRINI mod. PICO - Maximum tenon size: 100 x 30 mm - Maximum table tilt: 20° - Workpiece support guide tilt: 45° - Hourly production: 600/700 tenons - Cutter rotation: 9,000 rpm - Cutter motor power: 4 hp
maximum number of results exceeded
please refine your search
