car used for sale

REF-2103 DOUBLE TWIST HARD CANDY WRAPPER CM•500 Double twist hard candy wrapper. Brand: S.A. Carle & Montanari. Model: CM-H500. Series number: 01/E. Machine number: 2001. Dimensions: 1.100mm width, 1.600mm length, 1.850mm height.

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

pressure: 650 t passage width: 920 mm stroke: 1500 mm Table area: 2000x1500 mm ram surface: 2000x1500 mm dayligth: 2100 mm light-barrier: hydraulic: 250 bar closing speed: 500 mm/sec pressing speed: 0,5-10,4 mm/sec hole in plunger diameter/depth: mm opening speed: 250 mm/250 ejector: total power requirement: kW weight of the machine ca.: 47 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 650 t passage width: 920 mm stroke: 1750 mm Table area: 2000x1500 mm ram surface: 2000x1500 mm dayligth: 2100 mm light-barrier: hydraulic: 203 bar closing speed: 500 mm/sec pressing speed: 0,5-10,4 mm/sec hole in plunger diameter/depth: mm opening speed: 250 mm/250 ejector: return capacity: 150 t total power requirement: 75 kW weight of the machine ca.: 47 t dimensions of the machine ca.: 4,4x2,5x7,5 m max pressure 250 bar 800 t impact shock dampening dissolution rate from 0.5 to 66.4 mm / sec The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg stroke: 3700 mm fork length: 900 mm : Super elastic battery: Baujahr 2013 construction height: 2630 mm weight of the machine ca.: t Duplex / Free lift The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 13,65 t material: hochfest : length in total: 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 6,0 t max. ram stroke: 1250 mm max. workpiece diameter: mm total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Caprigiani Pastochef Ice Cream Maker Stainless steel with agitator and cooling Unfortunately strong signs of use Net price. Plus VAT ex stock

Construction 1976 Capacity 150 l , all Complete , ready for immediate use

A vibratory grinding bell is sold. This can be moved electrically up and down. Device immediately ready for use, comes from ongoing production and is discarded due to site closure.

working area: Ø 12 - 75 mm : 2 x 10 kW, 380 V : ca. 3,20 x 1,52 x 2,15 m L x B x H : total wight: ca. 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CARIBA CARTONING MACHINE, MODEL C222 Year of construction: 2015 Automatic horizontal cartoner with intermittent motion. It has a completely enclosed structure with safety devices on all the opening parts to ensure overall protection and compliance with all the current safety regulations. The machine is equipped with feeder. TECHNICAL DATA Approx.. net weight: Kg 2000 Length: mm 4400 Width: mm 1700 Height: mm 1820 Feeder dimensions: mm 3900 x 950 x 1300 Frequency: 50 Hz Voltage: 400 volts Production characteristics: Carton width mm: min max 15-150 Carton height mm: min max 15-50 Carton length mm: min max 55-250 Capacity speed: 100 cycles/min Electric consumption: 5 Kw/h Pneumatic supply: 6 bar The carton is picked up from the feeding area through a suction cup system, during translation it is splayed and opened and then placed on the chain equipped with trans ...

Antique Universal Measuring Microscope Fabr. CARL ZEISS JENAbuilt around 1939Craft No. 1191used, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TIG welding machine make UNION CARBIDE type HDA 300 ECMash. -No: 94765Power range: 5 A - 300 ADuty cycle: 50% ED 300 A: 100% ED 230 ADimensions: 1130 x 620 x 980 mmWeight: 182 kgWith- Recooling device- 3 m TIG hose package- mobile version- water cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turntable Fabr. UINION CARBIDE Type TT 300Fabr. -No: 88622 Year 1988Max. Load capacity: 300 kgSize of the three-jaw chuck: 250 mmPower connection: 230 V, 50 HzDrive power: 0.5 kWSwing motor: 0.18 kWDimensions L x W x H: 1000 x 1350 x 1000 mmWith- Footswitch- Rotational speed adjustable via potentiometerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turntable Fabr. UINION CARBIDE Type TTYear of construction 1988Carrying capacity approx. 500 kgSize of faceplate: 600 mmSize of the three-jaw chuck: 250 mmPower connection: 230 V, 50 HzConnected load: 0.5 kWSwing motor: 0.18 kWHeight of horizontal turning center: 1000 mmDimensions L x W x H: 1050 x 1350 x 1350 mmWith- Footswitch- Rotational speed adjustable via potentiometerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket -Number: approx. 110 positions -on Euro pallet -Weight complete: 580 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Interior diameter: 51 mm -Weight: 32 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Used Carrier 30 RB 140R air cooled chiller on R-32 build in 2022. Complete with 4 Danfoss DSF155A4ACA scroll compressors, condenser with 2 fans - 50/60 Hz - 1,3/2,4 kW - 970/1130 RPM with an airflow of 39.254 m³/h, braced heat exchanger as evaporator, water pump, expansion vessel and a control cabinet with 3 Schneider Electric HVAC variable frequency drives and a SmartVu display. This chiller comes with a EC declaration. Specifications Brand: Carrier Type: 30 RB 140R Product type: Air Cooled Chiller Capacity kW: 140,0 Capacity Tons: 39,8 Refrigerant: Freon Refrigerant Type: R-32 Weight in kg: 917 Sizes: 2100x2270x1380 mm (LxWxH) Compressor(s) type & model: 4x Danfoss DSF155A4ACA Display: SmartVu Number of fans: 2 Fan specifications: 50/60 Hz - 1,3/2,4 kW - 970/1130 RPM Remarks |: Y.o.b. 2022

Carrier 30RB0402–0379-PEE chiller – with a cooling capacity of 400 kW | ChillerTech - Used chillers available from stock! Comprehensive services in the selection of cooling technology, allowing us to maintain the highest standards and optimize the system for the individual needs of our customers. Innovative and easy-to-use cooling systems based on chilled water, enabling our customers to save nearly 45% per year. At the same time, the constantly expanding assortment of nearly 68 chillers available immediately allows us to make a professional selection in terms of cooling capacity, dimensions or type of components used in the device. Access to fully new as well as used chillers in the capacity range from 1 kW to 1.2 MW. High-performance, compact and, most importantly, completely safe devices in the field of cooling as well as stabilization of various technological processes. Tak ...

Universal length measuring device Carl Zeiss ULM600 used incl. accessories

Carl Zeiss WEMI x=150 mm / y=50 mm Accessories Lens 1.5x Lens 3.0x Lace Buck

Carestream (Kodak) Full Leg Spine Mount Tripod DirectView CR with 4 Kodak GB cassettes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream Storage Sheet System (CR) DirectView CR 975 with: 2x control panel 24 cassettes: 18x24 - 7pcs./ 24x30 - 8 pcs./ 35x43 - 9pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carruthers Six-Pak 46000 Six station volumetric filler Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Used Carrier 30 RB 0802 air cooled chiller. Complete with 12 Performer scroll compressors SH300A4ACA. Shell & tube evaporator/exchanger 284 ltr. Copper/alu condensor with 12 Axial fans with a total airflow of 54.167 l/s and Pro-dialog plus controling. Specifications Our inventory stock No. 13231 Brand Carrier Type 30 RB 0802 Product type Air Cooled Chiller Capacity kW 774,0 Capacity Tons 220,1 Refrigerant Freon Refrigerant Type R-410A Weight in kg. 6740 Sizes 7300x2250x2240 Compressor(s) type & model 12x Performer SH300A4ACA Display Pro-Dialog plus Number of fans 12 Fan specifications 960 RPM Remarks | Y.O.B. 2006 Amount in stock 2 We have hundreds of different chillers, see our other advertisements or visit our website.

Carefusion IVAC PCAM Syringe Pump Painkiller Pump STK 9/23 used, fully functional, immediately ready for use. You will receive a VAT invoice.

Description Dry ice cleaning unit Power supply: 220V Power : 1300W Air consumption: 6-12 m3/min

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!

Cooling capacity: 200 kW (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R410A Compressors: 3 pcs. Danfoss (scroll) Heat exchanger: Plate Dimensions: 2.40 x 2.25 x 2.30 м. Weight: 1547 кг. Working hours: 1050/5140/3690 h. Condition: Excellent, new condenser

total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m

disc diameter approx. 400 mm.

It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures.

It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible.

SECOND-HAND SUBFILTERING PLANT CARPENTERIA MANZANESE MOD. FST 270 M - CE RULES - Capacity 60.000 mc/h - Bags dimensions 200x2500 mm - N.3 motors 40+25+15 hp - Year 2004

Carle & Montanari 5 Roll Rafiner Model: Hydrostatic B 1300 1300 mm wide rollers

Sweeper station wagon, probably ex Carraro consisting of front mounted sweeper, PTO drives with its own hydraulics, 3 disc brooms, coupling triangle holder, height-adjustable support wheel. Semi-trailer suction container, hydraulically operated, hydraulic tipping emptying, with elbow, without connecting hose and with semi-trailer chassis. The station wagon is from municipal pre-ownership, not tested and is sold as available as defective.

Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC.

Vacuum chamber dimensions: 800x670x550mm, product carrier dimensions: 730x570mm, working container capacity: 60l, storage container capacity: 60l, dynamic mixer, two different materials possible with common hardener, on-site inspection is possible.

Without documentation.

X-travel: 400mm, y-travel: 500mm, z-travel: 300mm, max. workpiece weight: 50kg, resolution: u1=(3.4+L/200)µm, touch probe: PH6/TP2, software: U-Soft 9.04, operational hours: unknown, with documentation, without accessories, has been regularly maintained and calibrated.

An inspection is possible.

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph