127,864 used machines on RESALE, but how to find them? Machine Search
Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph
Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg
range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4 inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8 inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2 inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm ...
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG
We sell a Carrier chiller 30 GH 100 0171 AEE, built in 1997
grinding wheel size: 240x16x45 mm amount: 1 STK Year: unbekannt 0 Grinding disc Max. 2620 .T/M Profil 240x16x45 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Crane block, crane hook, load hook, single hook -Crane hook: load hook with adapter frame -Load capacity: 7.5 t -Dimensions: see photos -Transport dimensions: 860/470 (H460 mm -Own weight: 77 kg
REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.
REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.
Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...
Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible
Key data: 160 liter
Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).
Display, display module, display panel -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 -Dimensions: 440/190/H60 mm -Weight: 0.6 kg
ribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cime Careddu Italy, type DPS 12-12-1, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of manufacture: 2007, with height adjustment, set up for current bottles 330 ml + 500 ml + 750 ml 0.33 + 0.50 + 0.75 Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: DPS 12-12-1, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2007, with hight adjustment, adjusted to bottle 330ml + 500ml + 750ml 0,33 0,50 0,75
Zeiss Prismo VAST Gold with rotary table Year of manufacture 1999 Retrofit Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C98 with control panel BP26_SE Roundtable VAST Gold probe Stylus Changing Magazine 13-Fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories Workstation with monitor Software Calypso Basic other options of your choice
Load beam Manufacturer: Carl Stahl Length: 3 m Load beam in a modular system with curved suspension loop as single-point suspension, suitable for load hooks according to DIN 15401 and with two adjustable, burnt safety load hooks.
Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net
Carrier 30AWH012HD9 & 30AWH015HD9 Heat Pump Heating power: 12kW/15kW Power Cooling: 13.5kW/16kW Refrigerant: R410a Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Offer 24386 Specifications: - Mobile cartridge filter system with articulated extraction arms - Suitable for welding mist extraction when welding - Steel + stainless steel + aluminium + unalloyed or galvanised steels - Welding fumes class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - max. static pressure 2500 pa - Filter area 20 m² -Auto. Cleaning of the filters - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - Fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h
Type: 30AWH016H-9–R Year of Make: 2023 (New) Heating power: 16 kW Power cooling: 14 kW Refrigerant: R32 Original packaging! Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Used machine in good condition. Available for immediate delivery. - Control: SIEMENS 840 D - Axes: 2 - Cutting feed rate (X x Z): 0.1 - 3.000 mm / min - Power of driven tool: 37 kW - Weight: 25 t
Complete with intelligent random in feed system. As new condition
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universal keyway drawing machine of the Cardinal brand suitable for tooling, fixture construction, training and mold making Groove width 3 - 100 mm max. groove length 1250 mm Cgichwnnmv Tensile strength 6000 kg Drawing length 1250mm Motor 5.5 KW Weight 1650 kg Dimensions 1000x1650x1000mm
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...
A medical single-cylinder circular knitting machine Merz for compression stockings is available. Knitting systems: 4, cylinder diameter: 3.75 inch, number of needles: 400, knitting technology: 2-feed system, gauge: E34, needles per inch: 34. An on-site inspection is possible.
Technical Specifications & Performance Data The Used Saturator Rivi 1990, model Carborivi 30, is a robust carbonation unit designed for continuous beverage production. Suited to modern and legacy used bottling line configurations, it provides reliable CO2 dissolution for water and carbonated beverages prior to filling. This second hand industrial packaging asset is appropriate for integration upstream of rinsing, filling, capping, and labeling equipment handling PET, glass, or aluminum containers. Manufacturer: Rivi Model: Carborivi 30 Year of manufacture: 1990 Operational status: In production Nominal throughput: up to approximately 30,000 L/h (product- and temperature-dependent) Processed products: water and carbonated beverages Container compatibility (via downstream filler): PET bottles, glass bottles, aluminum cans Dimensions (W Ã L Ã H): 2500 Ã 1500 Ã 3500 mm Documentat ...
total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m
AIRCOOLED CHILLER CARRIER 30RB090R 93.4 kW Cooling capacity: 93.4 kW / 26.5 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Type of refrigerant: R32 Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Number of fans: 2 pcs. Dimensions: 2,3х2,1х1,3 m. Weight: 700 kg. Working hours: 0/0 h. Condition: New
Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120
pulling force - max.: 6,0 t max. ram stroke: 1250 mm max. workpiece diameter: mm dimensions of the machine ca.: 1,20 x 1,20 x 3,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...
- Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunction finishing for creasing and cutting - Applications: Ideal for business cards, brochures, and other printed materials - Efficiency: Precise cutting and creasing for quick and accurate workflow
faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilli ...
Filleting machine for salmon and trout in good working condition, overhauled in Denmark in 2017 This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably ...
SNA-11 Cooling Systems / Cooling Units Location B - Room E04, Cooler and K17, Ventilation 2 units Type Carrier 09CLU04090AF, functional, Built: 1992, HD Condenser Manufacturer: Carrier Refrigeration Technology GmbH Technical Data: - Refrigerant R 422; 25 bar - Includes 2 motors 65M07/65M08; KÜHNE KPER100L, Built: 1991, - 2.2 kW; 380V; 50Hz - Compressors from COPELAND DMRH 750EWM000 Find more here - / Contact us at -
Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...
Manufacturer: Carmet, Type: TRM 25, Year: 1999, Length mm: 2500, Working widht mm: 500, Total hight mm: 900, Drive power kW: 0,3, Year :1999
Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm
Manufacturer:Mario Carnaghi Model: TGF 10/1850 Year of Manufacture: 2000 Type of Machine : Vertical Lathe Technical Specifications: - Table Diameter: 1450 mm - Max. Swing Diameter with Vertical Slide: 1800 mm - Max. Turning Height on Table: 750 mm - Main Spindle Drive Power (AC Motor): 164 kW (variable 720 U/min) - Table Speed Range: 3.5 - 325 RPM - Max. Table Torque: 42,270 Nm - Vertical Travel - Right Slide (Z2” Axis): 800 mm - Slide Section Size: 250 x 250 mm - Rapid Traverse - Z2 Axis: 15,000 mm/min - Horizontal Travel - Right Slide (X2” Axis): 2907.5+120=3027.5 mm - Vertical Travel - Left Slide (Z1” Axis): 800 mm - Horizontal Travel - Left Slide (X1” Axis): 2990+120=3110 mm - Traverse Above Center (X1”, X2”): 120 mm - Axis Feed Rate (X1/X2): 15,000 mm/min - Axial Thrust: 5800 daN - Tool Clamping Force: 5000 daN - Milling Spindle Drive Power: 30 kW - Spindle Speed Ra ...
maximum number of results exceeded
please refine your search
