car wash used for sale

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

Interface, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-6902 -Type: 2083016902 -Number: 3x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.23 kg

Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-6303 -Type: 2083016303 -Number: 2 control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.27 kg

Control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5202 -Type: 2083015202 -Number: 5 tax cards available Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.33 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5404 -Type: 2083015404 -Number: 6x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.29 kg

Control card, input card, control system, edgebanding machine, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5105 -Type: 2083015105 -Number: 8x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.29 kg

Conversion processor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2083027407 -Type: 2083027407 -Number: 10x control cards available -Price: per piece -Dimensions: 30/195/H265 mm -Weight: 0.37 kg

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2083015407 -Type: 2083015407 -Number: 11x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5201 -Type: 2083015201 -Number: 16x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.36 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5203 -Type: 2083015203 -Number: 19x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.28 kg

21-26- Three-part mechanical press (used) In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania)

Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5101 -Type: 2083015101 -Number: 60x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Filtration plant, Fabr. Seitz Orion, 100 x 100, for 180 hl/h, factory overhauled in 2002, consisting of: - Diatomaceous earth frame filter, with 29 KG frame in stainless steel, external risers, sight glass fittings with pressure gauge, with KG discharge tray with screw in stainless steel, with KG dosing device - Sheet filter, with 150 VA plates, external risers, sight glass fittings with pressure gauge - Control platform between both filters, step at the KG filter - Control cabinet

Dong Sung folder gluer Typ: 1FG-400 Farmacutical Age: 2002 Straightline 1 point gluing Barcode reader Free of damages. Available immediately

SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)

SECOND-HAND CN SELF-LEARNING CARVING MACHINE GIORDANENGO - center distance 20 mm. - 10+10 bit each side - total 40 bits

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

Uhlmann C 130 horizontal cartoning machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement warranty Mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflet and Carton Code - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion -Vacuum pump

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA09 -Shaft: Ø 24 mm -Dimensions: see photos -Number: 4x universal joints available -Price: per piece -Dimensions: 102/46/H50 mm -Weight: 0.6 kg/pc.

Inv. Num. : 6336 Type: YCK-2A Producer: Beijing YC Digittech Created: 2013 Parameters: Compressive force: 1500 kg Material Dimensions: 85.6x54 mm Machine height: 1600 mm Machine length: 700 mm Machine width: 1100 mm Machine weight: 600 kg Productivity: 3500 cards/h

- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA04 -Square: 19 x 19 mm -Measurements: see photos -Quantity: 8x universal joint available -Price per piece -Dimensions: 360/70 / H55 mm -Weight: 3.6 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA05 - Inside: Ø 31 mm -Measurements: see photos -Quantity: 2x holders available -Price per piece -Dimensions: 141/73/32 mm -Weight: 0.4 kg

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

Jacob White TFS Two flap sealer Serial: NS161C Stainless two flap sealer, variable speed, min box width 100mm to max box width 260mm, hot glue pots, mobile, 1Ph

Professional packaging machine from a renowned European manufacturer for tape width up to 50 mm. Maximum carton dimensions approximately: width 650 mm x height 650 mm; length unlimited. Minimum carton dimensions approximately: width 130 mm x height 120 mm x length 160 mm. -No settings required for different carton formats. -Double-sided closure at the top and bottom. -Transport drive on the side. -Contact pressure infinitely adjustable for automatic width and height adjustment. -Adjustable working height of the machine. -Capacity approx. 800 cartons per hour. -Transport speed approx. 20 m/min. -400 V / 50 Hz. The machine can be demonstrated under power.

Control card, controller, PLC controller, optical card, optical control card, optical interface -Manufacturer: Dr. Schenk Industriemesstechnik, Optical Control Card -Type: XVP2, Optical 4160631 -Box dimensions: 280/200/H50 mm -Weight: 0.8 kg

Fully Automatic Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF integrated Flap-Folder & Carton Liner, age Dec. 2011 : OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton top Flap Folder & PE Film Carton Liner from a Roll of Film,. Full Stainless Steel Construction, age Dec-2011. Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll. Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls Max/ Min. Carton sizes: Case-sizes.png

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, Simatic PC 612 F control card -Type: PC 612 F B1100 Simatic 6ES5430-4UA13 -Number: 2x control card available -Price per piece -Dimensions: 265/200/H30 mm -Weight: 0.5 kg/pc.

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 -Dimensions: 275/200/H50 mm -Weight: 0.5 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, memory card, -Manufacturer: Siemens Simatic S7 Memory Card -Type: 6ES7 952-1AHOO-OAAO -Dimensions: 120/70/H30 mm -Weight: 0.1 kg

Romaco-Siebler CV 1/060 vertical cartoner, intermittent motion with Merz infeed/counter (5 lanes) for the packing of sticks, tuck and glue closure of the bottom and top flaps, carton size range: min. 20 x 15 x 60 mm (AxBxC), max. 170 x 140 x 200 mm (AxBxC), Laetus Argus bar code reader for carton capacity up to 60 cartons per minute, floor space cartoner approx. 6100 x 1600 mm (LxW), floor space cartoner including Merz conveyor/counter approx. 7400 x 3400 mm (LxW)

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, memory card, -Manufacturer: Siemens Simatic S7 Memory Card -Type: 6ES7 951-OKGOO-OAAO -Dimensions: 120/70/H30 mm -Weight: 0.1 kg

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, Simatic PC 612 F control card -Type: PC 612 F B1100-F425 C79458-L9001 -Dimensions: 250/200/H20 mm -Weight: 0.5 kg

Chassis, support wheel, tandem cargo wheel, load rollers -Chassis: Tandem cargo wheel for pallet trucks, electric forklifts -Wheel: Ø 80 mm -Image/Dimensions: see photos -Number: 2x cargo bikes available -Price: per piece -Dimensions: 220/125/H80 mm -Weight: 4.2 kg

Carton sealer, packaging machine, carton closing machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, Carton Sealer Type T-10 -Carton width: max. 530 mm -Dimensions: see photos -Overall dimensions: 980/930/H1680 mm -Weight: 135 kg

Automatic high speed cartoner which is currently packing boxes of cereal/protein bars.

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens pilz, FLASH control card PC 612 C/2 -Type: PC 612 F B1300-C480 -Order No.: 304073 -Dimensions cardboard: 90/70/H15 mm -Weight: 0.1 kg

Module converter, electronic module, base unit, module carrier, subrack, basic carrier, basic mounting rail -Manufacturer: pilz, Basic Mounting Rail -Type: P10 BG-S 304006 -Dimension: 650/230/H40 mm -Weight: 2.8 kg

1 box(12pcs) Pall ARD120UH12 Filter cartridges Pore size 1μm Length: 20", 20 inch, 20 inch, 508mm Diameter: 2.6", 2.6inch, 2.6 inch, 66mm Body is made of polypropylene and glue-free End Configuration Code: H21 End Configutation: DOE, Santoprene Gasket Seal Manufacturing date 2022-08 or newer. All filters are new and originally shrink-wrapped

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 182 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

Module converter, electronic module, base unit, module carrier, carrier clamp -Manufacturer: Pilz, module carrier unused in original packaging -Type: C-P2-BA-0 306004 -Dimensions of box: 180/135/H35 mm -Weight: 0.3 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg