car wash used for sale

PLC control, Electronic control board -Manufacturer: Weiss -Type: 6FX1115-0AA02 -Dimensions: 200/140/H40 mm -Weight: 0.2 kg

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Silencer, exhaust system, silencer, silencer, charger carburetor -Type: 210030-05 2 6 Z 03 Z -Price: per piece -Number: 10 pieces -Dimensions: 170/140/H220 mm -Weight: 1.9 kg/piece

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever -Dimensions: 670/530/H1215 mm -Weight: 30 kg

Groove electrodes, stick electrodes, carbon joint rods, carbon electrodes - Gouging carbon rods -1/4 x 12 -Dimensions: 250/170/H350 mm -Weight: 9.6kg

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -with: balancer and compressed air hose -adjustable depths: 5 -for staples: 32 mm wide -Dimensions: 390/100 / H210 mm -Total weight: 3.4 kg

Module converter, electronic module, base unit, module carrier -Base unit: 306022 -Dimensions: 235/175/H30 mm -Weight: 0.6 kg

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Control panel Pacmation made of Uhlmann C130 YOC 1996

PLC control, machine control, module -Manufacturer number: 1125 -Serial number: 109-178-4201 -Dimensions: 190/130/H30 mm -Weight: 0.3 kg

Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

PLC control, machine control, module -Product number: 5638 -Serial number: 109-264-4201b-1 -Dimensions: 190/130/H20 mm -Weight: 200 g

Heating cartridge -Diameter: 10 mm -Length: 140 mm -Volt: 230 V. -Watt: 230 W -Number: 3 pieces -Price: complete -Weight: 0.15 kg

Heating cartridge -Diameter: 10 mm -Length: 226 mm -Volt: 230 V. -Watt: 230 W -Number: 2 pieces -Price: complete -Weight: 0.15kg

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

Output module, control card, output card, controller -Control -Component carrier type: C-SPS-14 -Dimensions: 375/200/H200 mm -Weight: 3.8 kg

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -adjustable depths: 5 -Dimensions: 210/100/H400 mm -Weight: 2.4 kg

Geldmeier packaging system Specifications: • Infeed belt length (mm): 10,000 • Treadmill width (mm): 400 • Carton folding station • Adhesive station • Strapping station • Destacking • Carton length (mm): 950 - 2050 • Carton width (mm): 450 - 690 • Carton height (mm): 60 - 170

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Geldmeier packaging system Specifications: • Infeed belt length (mm): 10,000 • Treadmill width (mm): 400 • Carton folding station • Adhesive station • Strapping station • Destacking • Carton length (mm): 500 -1250 • Carton width (mm): 350 - 650 • Carton height (mm): 50 - 170

Persian carpet from IRAN Bakhtiar Province Size 438 x 634 cm Age: approx. 80 - 100 years Slight traces of use Valuation report in the present case

Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;

Stainless steel Intended for transporting cassettes with dimensions of 600x400 mm Six polyamide wheels, offset in height for control Carrying capacity: 400 kg Dimensions 65 × 42 × 16 cm

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 47 mm -large recess: Ø 50 mm -Quantity: 2 available -Price: per piece -Dimensions: Ø 81/H40 mm -Weight: 0.1 kg

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -large recess: Ø 115 mm -Quantity: 1 available -Price: per piece -Dimensions: Ø 180/H71 mm -Weight: 0.6 kg

KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet

For Sale Commercial Operation trade with cars, trucks, agriculture and building machines in Bosnia-Herzegovina -outside EU- - all other business possible - The company in Bosnia Herzegovina is an independent Doo, established in 1999. The main business is trade with all kind of new and second hand agricultural and building machines as wheelloaders and diggers , spare parts, cars and workshop for service. The statute of the Doo allows much more business and can be changed for all kind of other business. In that area all kind of business is possible and allowed, also production, distribution, and so on - as it is industrial area. Part of this DOO is a real estate with 3000 qm paved area, with strong fence all around. Building is new built in 2005 with German Standard - massive,fully damped against cool and warm, central heating. Ground floor there are 2 offices with tea-kitchen, W ...

Carton sealer, packing machine -Carton width: max. 530 mm -Dimensions: 1250/760/H850 mm -Weight: 33 kg

Tool holder for TR 20 mounts -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price/Sale: complete -Weight: 1 kg

Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Polygraph kama folding glue machine with 3 points format 104

PLC control, carrier module, universal empty housing -Manufacturer: SIEMENS -Type: Simodrive 6SN1162-1AA00-0AA0 -Width: 50 mm -Number: 2x available -Price: per piece -Dimensions: 480/50/H290 mm -Weight: 3.4 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 3500 kg -Number: 1x terminal available -Weight: 30 kg

Jackdal trolley Overwrough sewing machine KL 759

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

PLC control -Manufacturer: SIEMENS -Type: 6FX1115-0AA02 -Number: 1x modules available -Price: per piece -Dimensions: 280/210/H50 mm -Weight: 0.5 kg

PLC control -Manufacturer: SIEMENS -Type: 6FX1190-1AG00 -Number: 1x modules available -Price: per piece -Dimensions: 340/260/H65 mm -Weight: 0.6 kg

PLC control -Manufacturer: SIEMENS -Type: 6FX1111-0AM02 -Number: 1x modules available -Price: per piece -Dimensions: 340/260/H65 mm -Weight: 0.6 kg