car wash used for sale

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

Stock number U2275-2 Used stainless steel vertical pressure filter cartridge type by Begerow (Germany). Model M4923001. Volume of tank 1340 l. Tank is designed for work on pressure up to 6 bar and temperature up to 140 C. Material - stainless steel AISI 316L. Filtr has 4 columns for mounting filtrating cartriges. Includes stainless steel feeding pipe and valve with manometer. Mounted on 4 stainless steel legs.

Tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg Support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc. the roles are used but undamaged and have some light surface rust. the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an Aussparungvon ca. 10 mm on the shaft ends

Electrical consumption: 4.0 kW average consumption: 3.5 kW mechanical Speed max. 100 Cartons/minute product power supply: max. 300 blister/min Size: A x B x H Min. 30x15x70 mm Max. 100 x 85 x 150 mm Folding machine Prospectus Guk sizes. 3000 x 1300 x 1660 mm compressed air consumption 4-6 bar without elevation 1-2 Nm3/h with prospectus 5-8 Nm3/h Leatus for prospectus code, case and prospectus presence

Marchesini BA300 Continuous motion cartoner Automatic Bottle scroll infeed system Guk style leaflet folder Carton size range Width 25-100 Height 13-70 Length 78-150 Maximum mechanical output 250 CPM actual speed dependant upon nature of the product.

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

IWKA Model CP150 Automatic Horizontal bottle Cartoner. Capable of speeds up to 150 cartons per minute. Carton size: (Length) 20mm-90mm, (Width) 15mm-60mm, (Depth) 55mm-180mm. Set up for Reverse tuck style cartons. Has Embosse coding unit , GUK sheetfed leaflet feeder .

The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 610mm Roll length: 600mm Roll diameter: 60mm Wheels with internal thread Material: Steel Stock: 32 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow  ...

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg

Motor control card Bendingroller for TBA / 8 ASU

Output card TPMC PLC for Tetra Pak TBA 8 aseptic filling machine Output module TP OM16

Decorative holding card TMCC

Item number 90025-0017 Input card TPMC PLC for TBA 8 aseptic filling machine

Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.

- Standing glass cylinder - Without pressure reducing station for gas cylinder - Connections: 1 gas

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.

Stock# UG6311 Second hand line for production caramel candies, mono flavour. Line can produce fruit taste candies, mint candies or milk (fat based). Reporting output up to 468 kg/h. Line consist of: - Caramel mass preparation section - includes caramel cooker TC&C Process designers 24" Schlagenkocher, manufactured by Snelders, new 1997. Working output up to 1000 kg/h. - Winkler & Dunnebier forming line type 163.04, new 1997. Reported output up to 486 kg/h. Forming section has dimensions: 920 mm x 280 mm x 40 mm. Forming dies in motion - 118 pcs. Number of candies per one mold: 240 pcs. Machine works with speed up to 6.5 molds per minute. Working dimensions: L 11.85 m x W 1.9 m x H 2.83 m. Final product discharged at height 850-950 mm. Power consumption 40 kW

Adsorption system (absorbing plant, absorption system) used for air purification, activated carbon filter and solvent recovery Air filter, odour filter AMEG Type: DAP 4 exSo "Optima" Dimensions approx.: 3400 x 1400 x 2700 mm Control cabinet: 800 x 600 x 1900 mm The plant cleans air from vapours of organic solvents by adsorption mittles activated carbon filter. A more detailed description of the process can be found in the pictures.

New, reinforced and smooth-running beverage market cart from the manufacturer Katschotec with an additional basket for small parts. The trolley is not only ideal for beverage markets, but is also frequently found in DIY stores and electrical stores. Our B-goods are new goods with small flaws, such as .B small paint defects. Technically/functionally, our record trolleys are absolutely flawless. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Katschotec • Total dimensions (LxWxH): 970 x 525 x 40 mm • Dimensions platform (LxB): 740 x 470 mm • Dimensions basket (HxTxL): 250 x 170 x 485 mm • Stack depth: 230 mm • Stable flat oval tube construction with round tube handle • Ergonomically shaped handle protection caps • 4 steering wheels • Weight: 21 kg These are plate wagons with unbraked rollers.  ...

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.

TO WHOM IT MAY CONCERN ; WE VE RECONDED CARTRIDGE OF CAT 3608 AT OUR STOCK RECONDATION COMPLETED AT ABB SERVICE PART NO 118 2454 - 118 2482 SERIAL NO C 25401 - 429704 MAX RPM 32000 t max 700C THERE IS AVALIABLE NOOZLE RING AND COVER RING WITH CARTRIDGE. READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions  ...

SERAPID 12 T die cart built in Germany is an innovative vehicle of stable design, able to maximise production processes through the precise, safe and efficient lifting of dies or tools. All of this is due to an extremely efficient electric drive, reliable cylinders and rigid chain technology, which is an environmentally friendly alternative to traditional hydraulic systems. The SERAPID 12 tonnes die change cart also guarantees increased reach at maximum working speed, thanks to the capacious Hawker Perfect Plus batteries. The net weight of the machine is 5200 kg. Technical specifications of the SERAPID 12 T die lifting cart - maximum load capacity: 12000 kg - maximum lifting height: 2000 mm - minimum lifting height: 740 mm - lifting speed: 0-57 mm/s - travel speed: 2.7 km/h - chain stroke: 2500 mm - batteries: Hawker Perfect Plus - battery capacity: 48 V – 330 Ah - chain ty ...

Used semi-automatic PackService cartoner model PS300 Functional Description This semi-automatic machine has been designed to fill pre-formed cases that are loaded manually onto the hopper. The hopper is set at a height that can vary between 800 and 920mm and the cartons are moved into the stacking area by means of a conveyor belt. Depending on the size of the cases and cartons that the machine packs, a pre-stacking station can be added to the stacking zone. This permits the automatic feedbacking of cartons yet to be stacked during the transfer phases of the cartons to the hopper or to the cases. The case is held on the hopper by means of the carriage; Once the case has been filled the carriage moves the case down and onto the outfeed idle roller Construction: º Frame in painted steel. º Casings with frame in anodized steel with openable panels in transparent methacrylate wi ...

Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.

Housing Carterfilter

CPU Card

Key data: 4000 mm, 5000 mm

Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the  ...

for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy  ...

ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!

PAGUS

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Car Charging Computer VAS 5908 Charging computer for car starter batteries (lead acid, Ge, AGM, fleece batteries) Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% vehicle power supply suitability, protection of the on-board electronics / airbag - Use as a charger, external power supply and for vehicle supply in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short circuit and reverse polarity protection - Protective function in the event of battery defects - Safe spark suppression - Convenient menu navigation / loading parameters configurable - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production ...

Automatic Vertical Cartoning Machine Type VC Compact rotary machine, built in 1991 The vertically clocked cartoning machine is suitable for erecting, filling and closing pre-glued folding cartons. The VC vertical cartoning machine is a mechanically controlled machine, the main movements of which are generated by crank or cam gears. Output up to 40 folding cartons/min, The machine is equipped with a plug-in closure The machine is partially overhauled, i.e. completely new control cabinet, mechanical components are partially overhauled The following folding box dimensions can be processed: A 20-80mm W 15-60 mm H 60-200 mm Machine is set up to customer format(s) and delivered ready for use. The following additional equipment is possible: brochure feeding device, hot stamping

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic horizontal cartoning machine type CMI-8 (built in 1987) and type CMI-11 (built in 1997) The intermittent cartoning machine is suitable for erecting, filling and closing pre-glued folding cartons. The CMI-8 horizontal cartoning machine is a mechanically controlled machine, the main movements of which are generated by crank or cam gears. Capacity: up to 60 folding cartons/min can be The machine is equipped with a hot melt cap The machines are completely overhauled, i.e. all mechanical components are completely renewed, the electrical equipment is state-of-the-art (retrofit) The following folding box dimensions can be processed: CMI-8: A 20-150mm W 15-80 mm H 55-225 mm CMI-11: A 20-230mm W 15-125 mm H 55-250 mm Machine is set up to customer format(s) and delivered ready for use. The following additional options are possible: brochure feeding device, bl ...

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.