134,945 used machines on RESALE, but how to find them? Machine Search
consisting of three pieces of load capacity each: 250 kg Auction-ID: A7-49089-294
Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990
Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980
Working height: 20.660mm, load capacity: 225kg, weight: 6,1t, the battery should be replaced, the vehicle has been stationary for approx. 3 years. An on-site inspection is possible.
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 16 Kg dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
11x Seco Lifiting Tables 2000kg (2021) Auction-ID: A1-48805-229
table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Erka dough machine Model: HK 30 for approx: max. 30 kg dough 2 courses Machine mobile with locking foot Connection 400V, 16A-CEE plug Machine You can find many more bakery machines with us.
Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
maximum number of results exceeded
please refine your search
100 € 
