129,248 used machines on RESALE, but how to find them? Machine Search
Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts
TECHNICAL DATA: Dimension mm: 3300 x 1100 Payload Kg: 1000
Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers
Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer
Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971
Recording for lifting tippers for Diosna or Kemper lifting tipper models Dimensions: 120x110x125cm W/D/H
Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available
Diosna Dough Machine Model: Laboratory Kneader Stainless steel boiler and kneading arm for max. 6 kg dough Protective grille with protection circuit 2 gears Machine base mobile DGUV V3 tested E-system NEW Connection 400V, 3 Amp, 16A-CEE plug Used machine overhauled with 6 months warranty
-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
-Boiler lift tipper from Kemper model HK 150 -with stage for Kemper President Kessel -Height approx. 198cm -Tipping height approx. 195cm
Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm
Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.
Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.
Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.
-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm
Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg
Lifting kneader lifting kneading machine Kemper F30 SL -Manufacturer: Emil Kemper GmbH -Model: F 30 SL -with stainless steel boiler and lifting arm -with automatic timer -2 speeds -with flour dust cover -mobile on wheels -with new timer
Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible
Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg
Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm
Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009
Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock
Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm
Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm
Lifting mixer Kemper F 125 ASL extendable - with 2 speeds - with 2 automatic timers - with stainless steel lifting arm - max. 125kg flour or 200kg dough per kettle - with flour dust cover - Boiler with handle
Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired
Lifting mixer Diosna S35 2G A used lifting mixer Diosna S35 2G is currently for sale and immediately available in our warehouse in Bielefeld. -Lifting mixer Diosna S 35 -with stainless steel boiler -for max. 35 kg dough -with 2 speeds -with foot switch -with protective cover -Boiler diameter inside: 52cm -Boiler height inside: 35cm -Machine completely repainted
-extendable Diosna lifting kneader -with 2 stainless steel shells -per kettle for max. 200kg dough or for max. 125kg flour -2 speeds slow and fast -Machine completely repainted -with 2 to 4 boilers to buy
Hubkneter, Fabr. Diosna Type D200 A/2 G
maximum number of results exceeded
please refine your search
10 € 
