car lift used for sale

approx. 50 bays of general cargo flow rack / provision rack for crates or cardboard boxes etc., SSI Schaefer – used – : Price per field ex site: only 395.-€ (net) dismantled, packed and loaded! Price per field: only 350.-€ (net) dismantled, packed and loaded! Manufacturer: SSI Schaefer Type: Flow rack DR2 Year of construction: 2002 Storage according to FIFO principle (First In – First Out) Max. shelf load: 240kg at bay width: 1.056mm 480kg at bay width: 1.944mm Max. Field Load: 960kg at bay width: 1.056mm 1.920kg at bay width: 1.944mm 4 levels Shelf dimensions: Depth: approx. 2.90m Height: approx. 2.47m Field width: mainly 1.944mm Field width: 1,056mm – approx. 16 bays of the 50 pieces Dimensions flow level: approx. 2.95m Condition: very good Available: from approx. Mid-January 2024 Location: Biebergemünd

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

1 aseptic SIG Combiblock carton filling machine Type: CB 510 Int. Designation: Combiblock Line 4 Power: 10,000 pcs/hour Standard formats: 500ml, 750ml and 1,000ml Format changeover within 2 min without Replacing parts With 3 packaging paths next to each other With valve nodes With all surrounding machines to Production of aseptic packaging with screw cap Energy consumption: Electricity: Approx. 50 kWh Compressed air: 6 bar, approx. 70 Nm³/h Water Drinking water quality: approx. 400-600 l/h Steam: Saturated steam 4-16 bar, min. 60 kg/h, Temp. min.154°C , consumption production with steam injection, 10-14 kg/h Pack sterilization with H2O2: Consumption at lfd. Production: approx. 3.6 l/h. Installation dimensions for the SIG machine LxWxH: 7,500 x 3,300 x 4,400 mm free Ceiling height. Complete space requirement with carton packer and screw cap application t ...

Carton erector, Bedo – second-hand - : Price from location: 29.500.- € (net)! Manufacturer: Bedo Type: VA 1195 Year of construction: 2006 two cardboard magazines Machine number: 1195.1.6684 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar With Nordson ProBlue 4 Adhesive Melter 4 Litre Hot Melt Glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: Series 11 up to 20 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Carton closure by means of hot melt glue, self-adhesive tape or gummed tape small to very large carton formats one or two cardboard magazines motoric/pneumatic mode of operation no format parts

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

Conventional Vertical Lathe UMARO SC 53 faceplate diam - 4700mm max turning - 5300mm max height of workpiece - 2270mm max. workpiece weight - 25T

Vertical Turning Lathe EMSIL HVTL 60/80. faceplate diam - 6000 mm max turning - 12000 mm max height of workpiece - 6500 mm max. workpiece weight - 100 tons With C-axis

Vertical Lathe EMSIL VTL 60/63. faceplate diam - 6000 mm max turning - 6300 mm max height of workpiece - 3500 mm max. workpiece weight - 150 tons With C-axis

Filter cartridge -1227 6605 -Number: 9x filters available -Price for all 9 pieces: 110 euros

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min  ...

For sale CNC Vertical Turning Lathe. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons Siemens CNC Control

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

For sale REM Vertical Turning Lathe SC 43/44 with DRO. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Bqyuqbw8uq Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons DRO Control

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 I09rgztr Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X  ...

Technical Details: Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41; 51)kW Machine tool tape: ...

Maximum turning diameter: 8000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE dimensions: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,6÷45 RPM Table speed range –milling mode: 0,05÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41)kW Machine tool tape: ISO 50 WEIGHT ...

5.5m CNC VTL w/ Two turning heads The machine is New, available due to a postponed order. Technical Characteristics CNC equipment Siemens 840Di Work piece diameter: 5.500 mm Bludhcom Max. height: 3.200 mm Work piece weight: 60 to Table diameter: 4.500 mm Table speed: 0.2 - 30 rpm Power of main drive: 100 kW Hydrostatic bearing for the table Cross rail vertical travel: 2.600 mm Ram vertical travel: 1.800 mm Ram horizontal travel: 3.150 mm Ram cross section: 300 mm x 300 mm

Vertical Turning Lathe with Double Columns UMARO SC 53 Technical Data: Table diameter: 4500mm Max. turning diameter: 5000mm Max. height of workpiece: 3000mm Conventional Control Max. workpiece weight: 30 tons Working table range of rotation speed: 0.85-25.4 r/min Working table step of rotation speed: stepless Horizontal travel of tool post: 2650mm Crossbeam travel: 2150mm Power of main motor: 75 kW Weight of machine (approx.): 80tons

CNC Vertical Lathe REM SC 27-CNC-2S with 2 heads for sale in our stock. Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

PLC control, electronic control card -Manufacturer: Weiss -Type: 6FX1115-0AA02 -Dimensions: 200/140/H40 mm -Weight: 0.2 kg

Silencer, exhaust system, silencer, silencer, charger carburetor -Type: 210030-05 2 6 Z 03 Z -Price: per piece -Number: 10 pieces -Dimensions: 170/140/H220 mm -Weight: 1.9 kg/piece

Module converter, electronic module, base unit, module carrier -Base unit: 306022 -Dimensions: 235/175/H30 mm -Weight: 0.6 kg

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

PLC control, machine control, module -Product number: 5638 -Serial number: 109-264-4201b-1 -Dimensions: 190/130/H20 mm -Weight: 200 g

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

PLC control, machine control, module -Product number: 1125 -Serial number: 109-178-4201 -Dimensions: 190/130/H30 mm -Weight: 300 g

Heating cartridge -Diameter: 10 mm -Length: 140 mm -Volt: 230 V. -Watt: 230 W -Number: 3 pieces -Price: complete -Weight: 0.15 kg

Output module, control card, output card, controller -Control -Component carrier type: C-SPS-14 -Dimensions: 375/200/H200 mm -Weight: 3.8 kg

Carton sealer, packing machine -Carton width: max. 530 mm -Dimensions: 1250/760/H850 mm -Weight: 33 kg

Bystronic BySprint Pro 4020 6 Kw Carbon Laser Cutting Machine Machine has installed March 2017! All maintenance has been done by Bystronic POWER ON: 16158 CUTTÄ°NG TIME:15483

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Control panel Pacmation made of Uhlmann C130 YOC 1996

Carousel Lathe - Single Stand Schiess 3 DKE 280 Manufacturer: Schiess GmbH overhauled: 2008 Control Siemens ... Sinumerik 840 E workpiece diameter... 3000mm Table diameter ... 2800mm table load ... 18000kg workpiece heights ... 1800mm Axis Z ... 1400mm Tool changer ... 12 Main engine power ... 50kW Machine weight ... 40000kg The machine is in good condition, possible to test under power.

Carton erector Connection values: 400 V / 50 Hz / 3 Ph Rated current: 11 A Power: 3.7 kW Control voltage: 24 V Condition: fully functional Availability: as of now Machine dimensions (LxBxH): approx. 1950 x 1650 x 1960 mm

Sculptor copy milling machine Brand Reichenbacher Type R632 / 40 Machine number: 2068 2 80 Milling of wooden figures e.B. nativity figures etc. with copy pen. Also to be used as a copy car carving machine. Machine is to be operated manually. 6 workpieces can be machined simultaneously. Clamping length maximum 1050 mm Workpiece diameter maximum 300 mm If each spindle is used, maximum workpiece diameter 150 mm Milling motor motor power 0.5 kW each Dimensions 3700 mm x 2200 mm x H approx. 1500 mm The machine is in stock with us, but still needs to be assembled and tested.

Travel: 670mm; Hold-down: Exenterspaner;

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

- Pneumatic C 0-90 rotation - Vacuum circuits: 1 - Clamp circuits:2 - Robot support height 450mm. Including - Compatible machine: 450 - 500 t - Control: CNC 6.2 - Stroke (Y): 1.600 mm - Stroke (X): 500 mm - Stroke (Z): 2.000 mm - Payload: 15 Kg - Driving method: servo

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

workpiece diameter ... 2600mm Table diameter ... 2400mm table load ... 12000kg workpiece height ... 1600mm Axis Z ... 1000mm Main engine power ... 80kW L x W x H ... 10400 x 5050 x 6730mm Machine weight ... 48000kg The machine is in good condition, possible to test under power.