car lift used for sale

Zeiss CNC Coordinate Gauge Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of Make: 2004 Retrofit 2024 Last calibration 01/2025 Measuring range: X= 900 mm, Y= 1500 mm, Z= 700 mm Technically and optically in excellent condition Device features, equipment: Control C99 with control panel BP26_SE Automatic temperature compensation Sensors VAST GOLD Sensors RDS with VAST XXT Stylus Magazine MSR 10x VAST Gold Probe Changing Magazine 3-fold VAST XXT Pushbutton Change Plate 8x VAST Gold Pushbutton Changing Plate 3x VAST XXT Reference probes Temperature sensor Pushbutton Accessories Measuring ball HP Z4 Workstation WIN11 with Monitor Software Calypso Basic 2024 Options Curve and QS-Stat Upgrade Calypso and other options possible Other accessories and options possible Available at short notice

Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of Make: 2001 Retrofit 2024 and 2026 Last calibration 11/2023 Measuring range: X= 900 mm, Y= 1800 mm, Z= 700 mm Technically and optically in excellent condition Device features, equipment: Control C99 with control panel Automatic temperature compensation Sensors VAST GOLD Pushbutton changer magazine 17-fold Pushbutton change plate 20x Pushbutton Accessories Measuring ball Reference probes HP Z4 Workstation WIN11 with Monitor Software Calypso Basic 2024 Option QS-Stat Upgrade Calypso and other options possible Other accessories and options possible Available at short notice

Eclipse 7/7/6 CNC Technical data: Measuring range X=700mm, Y=700mm, Z=700mm Control C99 with control panel BP26_SE Renishaw TP20 probing system Equipment: Calibration ball Pushbutton Accessories Calculator HP with monitor 27" Software: Calypso Basic 2017 CNC Preset Module Freeform surface Upgrade to current version possible The machine is technically and visually in excellent condition and has very few operating hours Immediately available

CARL ZEISS CNC Coordinate Measuring Machine ACCURA II MEASURE 16/42/15 Year of Make: 2013 Refurbished: 2025 Measuring range: X= 1600 mm, Y= 4200 mm, Z= 1500 mm Control: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Stylus Change Magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 Workstation with 27" Minitor Calypso Basic current version Any additional option possible Accessories: Measuring ball Interchangeable plates XT and XXT Interchangeable magazine slots Pushbutton Accessories Documentation Other accessories

ZEISS ACCURA SIZE 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X= 700 mm, Y= 900 mm, Z= 500 mm MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 MPE-P = 1.7 MPE-THP = 2.5/50sec RONt = 1.7 Device features, equipment: Control C99 SR VII Automatic temperature compensation Sensors VAST XT GOLD Selectable stylus changing magazine Pushbutton accessories selectable Measuring ball HP Workstation with Monitor Software: Calypso Basic current version Options: Calypso freely selectable Other accessories

Industrial engine with hydraulic pump ID: 2037/R Manufacturer : Irion-Car The part is technically in good condition, Nevertheless, this is an original used items, which shows signs of wear. Scope of delivery can be found in the photos. Internal number: 618 688 397695580530

General SKU323Y683 LocationBarneveld CEcheck MakeCarnitech Main Features MaterialStainless steel Volume5000 Ltr. Motor22 KW Specified Features - Ribbon blender Ribbon blendercheck Continuous mixercheck Capacity5000 l Trough sizes1350 x 3000 x 1500 mm With covercheck Inletø 214 mm Manholecheck Outletø 330 mm With jacketcheck Motor22 kW (400 V, 1500 rpm) With variable speed drivewith frequency converter Speed mixing shaft±10 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Serial05-0238 TypeCT-3085 Year of construction2005 Year of construction2005 With switchgear( as is) Floor space5,30x1,60 m Total height3,6 m Weight5100 kg Extra information with discharge screw. motor discharge screw: 3kW (400 V, 1440rpm) stainless steel, 5000 liters, jacket, covers, outlet 330 mm, 22 kw Powdered foodsGeneric medicinesTea, herbs & coffeeStarchGreen F ...

rate of flow: 250 l/min accumulator pressure: max. 8 bar range L-W-H: ca. mm Shipping weight: ca. 600 kg Packing: ca. m Osmosis System Complete water treatment system with dual softening, two IBC tanks, and control system, still installed, documentation available, viewing possible The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AIRCOOLED CHILLER CARRIER 30RB0342 0474 PEE 328 KW Cooling capacity: 328 kW / 93.26 tons (12/7 — 35°C) Year of manufacture: 2009 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss SH300A4ACA (scroll) Type of refrigerant: R410A Number of fans: 5 pcs. Hydraulic module: 1 pcs. water pump Salmon LRN206-15/5.5 CARRIER ST, expansion vessel. Dimensions: 3.61x2.26x2.3 m Weight: 3070 kg Working hours: 4790/4310/4350/3520/3630 h. Condition: Good

Used CIME CAREDDU Silver 8-1 crown filling monoblock 1500 BPHTechnical Specifications & Performance DataThe SILVER 8/1 CROWN is a filling monoblock designed for the filling and crown capping of still beer with bottle fermentation. Built in 2015 and subsequently overhauled/revised, this compact bottling unit combines an 8-valve light-vacuum filler with a single-head crown capper. It is configured for cylindrical 0.33L glass bottles and reaches a maximum output of 1,500 bottles per hour on this format.Model: SILVER 8/1 CROWNConstruction year: 2015Maximum speed: 1,500 bph for 0.33L bottlesFilling principle: Light vacuumFilling valves: 8Capper: Single-head crown cap turretStandard closure: Ø 26 mm crown capOptional closure: Ø 29 mm crown capContainer: Cylindrical glass bottlesRotation: Clockwise, left to rightMachine body height: Approximately 2,500 mmAdvanced Automation & Control SystemsT ...

length:12192 mm width:2438 mm height:2896 mm weight:4580 kg Total weight:34000 kg charge:29420 kg Cooling Container Internal dimensions: Length 11585mm Width 2290mm Height 2545mm Pallet spaces 23

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...

Aerial platform self-propelled scissor lift PB Type: S151-12E Year of Make: 2008 Load capacity 400 kg Platform dimensions approx. 2.8 x 1.19 m Platform extension approx. 100 cm Transport dimensions approx. 3.0 x 1.21 x 2.89 m (height railing folded down: 2.07m) Weight approx. 4180 Kg Working height approx. 15.1 m Platform height approx. 13.1 m Movable up to 15.1 m working height (indoor use) Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a g ...

Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 20.0-250-2460-825-6440 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6440 mm Overall width 2850 mm Installation depth 2900 mm Total payload machine up to 2 x 10,000 kg 52 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 900 mm above OKFF, then 800 mm high Engine power Vertical drive 4 kW / 400 Volt Horizontal drive 0.5 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 20.0-250-2070-825-6680 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6680 mm Overall width 2400 mm Installation depth 2885 mm Total payload machine up to 2 x 10,000 kg 37 carriers for up to 250 kg payload each in clear usable dimensions: B = 2070 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening in 900 mm above OKFF, then 825 mm high Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/grey, galvanised beam Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 30.0-250-2460-825-8450 storage systems modernized by us with a completely new StoreControl L control system. currently 13 of 17 identical aircraft are still available Exterior Dimensions: Height 8450 mm Overall width 2805 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 50 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening at 890 mm above OKFF, then 800 mm high; hand-operated lifting door, Engine power Vertical drive 5 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme creamy white/blue, galvanised backing Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently ...

We offer an LTG-TowerMax L 30.0-500-1300-1270-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6000 mm Overall width 1620 mm Overall depth 4150 mm Total payload machine up to 2 x 15,000 kg 20 carriers for up to 500 kg payload each in clear usable dimensions: W = 1300 mm T = 1270 mm (special depth) Usable height up to 50 to 750 mm Start of the operating opening in 300 mm above OKFF, then xxx mm high, with manually operated lifting door, Engine power Vertical drive xx kW / 400 Volt Horizontal drive xx kW / 400 Volt Colour scheme beige/beige, galvanised straps Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 30.0-400-2460-825-4889 storage systems modernized by us with a completely new StoreControl L control system. currently 6 identical machines are available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials

; Gross weight [kg]: 906; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 360; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 2580; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 320

; Gross weight [kg]: 2600; Inspection Date: 2026-09-02; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

Work platform self-propelled articulated work platform with boom PB Type: S171-12ES Year of Make: 2013 Load capacity 400 kg Platform dimensions approx. 2.79 x 1.17 m Platform extension approx. 100 cm Transport dimensions approx. 3.28 x 1.22 x 3.28 m (height railing folded down: 2.32m) Weight approx. 5120 Kg Working height approx. 17.1 m Platform height approx. 15.1 m Movable up to 17.1 m working height (indoor use) Self-leveling support Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging c ...

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Baumann NUP-650 Paper Stack Lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Baumann NUP-650 Paper Stack Lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Baumann NUP-650 Paper Stack Lift Price: 3750 EUR Download PDF Baumann NUP-650 Paper Stack Lift This machine is in very good condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 650 kg. Pallet/sheet dimensions: 785 x 1150 mm. Documentation included. Ask About The Product Name (required) Company name Email (re ...

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg

Polar Mohr LW 1000-4 Paper Stack Lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 Paper Stack Lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 Paper Stack Lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 mm Ask About The Pr ...

Perfecta BSH 5-1200 Paper Stack Lift with Sidewall - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Perfecta BSH 5-1200 Paper Stack Lift with Sidewall Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Perfecta BSH 5-1200 Paper Stack Lift with Sidewall Price: 6250 EUR Download PDF Perfecta BSH 5-1200 Paper Stack Lift with Sidewall This machine is in excellent technical and visual condition. It’s practically unused. It features an adjustable sidewall for easy stacking. Stylish design. 1200 kg lifting capacity Plate size: 990 x 1350 mm 380V power supply Weight: 80 ...

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: i-lift, hydraulic scissor lift table trolley, scissor lift trolley, lift table type QT150 -Load capacity: 150 kg -Platform: 700 x 450 mm -Dimension when retracted: Height 245 mm -Extended dimension: Height 760 mm -Quantity: 1x scissor lift truck available -Transport dimensions: 910/450/H350 mm -Weight: 41 kg

Polar Mohr LW 1000-4 paper stack lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 paper stack lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 paper stack lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 paper stack lift The unit is in excellent technical and visual condition. This is a currently manufactured model. Hydraulic drive. Power supply: 380V. Features an automatic lifting cycle controlled by a photocell, as well as a manual mode; high-speed operation. Load capacity: 1000 kg. Pallet dimensions: 1 ...

Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...

scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Sub ...

Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph

working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm