We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 ...
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
used
Vertical Baler Frihopress CL-46Product DescriptionManufacturer: FrihopressType: CL-46Condition: used, functional, baker conditionPressing force: 8 tonsEngine: 1.5 kWConnected load: 230 Rating: Cardboard, plastic, cans, residual waste, etc. Areas of application: hotels, restaurants, hospitality, bakeries, food markets, pastry shops, etc. Exterior Dimensions: Width 74 cm, Depth 90 cm, Height 174 cmSee pictures for details.
used
We offer you a Maschio Mondiale 120 TopCut from a current recycling. Year of construction: 2023 Condition: Used, but good Original price: n/a Asset Manager: Klaudius Giolbas Phone: 0172 2796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 96172 Mühlhausen The sale is without warranty Subject to prior sale
used
Technical data baler: Manufacturer Lindemann Type BIGRO 1020 Pressing force main press 100 t Specific pressing force 12.12 kg/cm² Pressing force free rammer 24 tonnes Chute dimensions 1,040 x 1,400/2,000 mm Bale dimensions 830 x 1100 mm (h x w), variable length Drive power of baler 2 x 55 kW Wirbulator drive power 11 kW Tying 4-fold vertical, fully automatic Throughput rates with a bulk weight of bulk density of 20 to 30 kg/cbm approx. 10 tonnes/hour Bulk density from 40 to 60 kg/cbm approx. 18 tonnes/hour Bulk weight from 70 to 100 kg/cbm approx. 28 tonnes/hour Throughput volume in single-shift operation in 2021: 15,760 tonnes Filling volume of hydraulic oil tank 2,250 litres Transport weight of press approx. 30 tonnes Additional equipment on the baler: Free rammer in front of the counter blade with 24 t pressing force Hardox base plate, bolted, exchangeable Wirbulator, drive power 11 ...
used
Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...
used
Technical data baler: Manufacturer BOA Type 2040.S.5V.71.37 Year of manufacture 2003 Operating hours approx. 35,598 hours, as of March Pressing force main press 71 t Specific pressing pressure 9.1 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 37 kW Tying system 5-fold vertical, fully automatic Throughput rates for quality: B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h) Machine weight press approx. 24 t Noise level
used
Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...
used
Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replac ...
used
Description: Serial number: 0738992919/90 Internal dimensions: approx. 1100 x 900 x 1600 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 2,200 mm, weight approx.: 750 kg
used
Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK) Year of manufacture 2007 Operating hours 11,970 hours, as of March Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 ...
used
A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil ...
used
Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine docu ...
used
Technical data baler: Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Press force main press 100 tons Specific press force 145 N/m² Max. cutting force 120 tons Press force free stamper 25 tons Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW Rated current 280 A Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 20 to 30 kg/cbm up to 15 tons/hour bulk weight of 35 to 50 kg/cbm up to 23 tons/hour bulk weight of 60 kg/cbm up to 27 tons/hour bulk weight of 100 kg/cbm up to 44 tons/hour Bale weight 600 up to 900 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens SIMATIC Transport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x ...
Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...
new
Material Configuration R186132210 Size 125 Type FNS - Flange,Normal,Standard Preload Class C2 - Medium Preload Accuracy Class P - Precision Gasket SS - Standard Version CS - Carbon steel Lubrication 02 - Preserved Lubrication connection (loose) SL - straight grease nipple Attachment element left (AK front) 000 - without attachment element Endsheet element right. (AK front) 000 - without attachment element Carbon steel Size 125 C2 = preload 8 % C Accuracy class P Conserved Flange Normal Standard Height Standard without basic lubrication
new
Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before
L=440 Pull-out dimension:40 FL ø = 120 Hole 8/8
used
Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...
used
KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization) ...
used
CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg
used
CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg
R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately
R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately
used
Folding carton adhesive machine for CD cases equipped with friction feeder, transport route, press station, suitable for the following products: CD / DVD covers, envelopes, flat slippers, flight ticket bags, presentation folders.
used
Haffmans/Norit inline carbonator, fo inline adding CO2 to beverages. Only used for R&D activity's. CO2 flowmeter is missing, otherwise in good condition.
used
Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm
used
Spurt width: 980 mms edition height: 430 mms impulse: 0.37 kW auxiliary carriages in reinforced execution with Kippschaemel and running around role chain for model, with a hydraulic tiltable and adjustable Muldenschaemel for round timber, including cables and cable balance.
used
Track gauge: 980 mm Support height: 430 mm Drive: 0.37 kW - reinforced design - with tipping stool and circeaching roller chain for model - with a hydr. tilting and movable trough smelter provided with chains
used
Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.
CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW
used
CNC Vertical lathe GORBREX Model: TKV 512 Year of manufacture: 2016 CNC CONTROL: SIEMENS SINUMERIK 828 Brand new machine, modified of SEDIN 1512 Excellent condition! Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828 Machine will be built on order Delivery Time: app. 2 months Technical details: Turning diameter: 1250 mm Faceplate diameter: 1120 mm Max workpiece height: 1000 mm Max.workpiece weight: - 3200 mm (5...80 rpm) - 1000 mm (250 rpm) Max swivel angle(upper carriage): 45 Max vertical feed(side carriage): 5 Number of ranges of table speeds: 18 Table speed: - min.: 5 rpm - max. 250 rpm Number of ranges of carriage feeds: 16 Carriage feed: - min.: 0.07 rpm -ma ...
used
Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.
used
Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent
used
CARTRIDGES FILTER MANUFACTURER: DONALDSON TORIT manufacturer: Original Donaldson Torit filter material: Extremist web original type: 262-5026 (Open available: 20 pieces of price: each 90.-? 262-5002 (lids) Available: 3 pieces of price: each 90.-? 262-5015 (Open available: 5 pieces of price: each 70.-? suitable for ray arrangements Ray cabin Lackieranlage plasma Absaugung etc.
used
CARVING machine type MARIANI PL 8 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.8 spindles distance betwen spindles mm. 420 n.02 rotation speed of spindles rpm 9.000 / 12.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5000 x 2800 H=mm.1500 ( machine assembled ) Volt. 380/50
used
3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...
A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...
used
7 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -8 Stand / 28 bars -Traverse length 2.70 m -Load per level 2.4 tons -Shelf height: 3.70 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU cou ...
used
11 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -Stand 12 / 32 bars -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la car ...
used
CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )
used
Kartonlaengslauf 10 to 25 cycles/min Hot glue manufacturer: servant
used
Cartoning machine MINGOZZI, type: 1010 incl. hot glue system UES filling of bulk in cartons with volumetric dosing system. -Infinitely variable format without tools - so small product batches also suitable - hot glue device manufacturer UES (2009) used for carton sizes: - width: 119-193 mm - depth: 40-88 mm - height: 198-295 mm Power supply 380 V, 50 Hz, 25.5 A Measures 30 PCs. / min. Glue pump 1.2 bar Pumps 1.85 kW
used
used
fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket
used
Cardridge filter single, 1 x with TI Max. Operating pressure: 10 bar Max. Operating temperature:-25 / + 150 ° C Content: 9.3 L Price/piece Negotiable
used
Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)
used
RICE Category Paletizer Type: RP40 Name of Reis Robotics Manufacturer of rice Serial number 36/xxxxx Year of manufacture 2003 Performance 7 pallets / h. Dimensions approx. 3.000 x 6.000 x 4 000mm Electric 400VAC 50 Hz, 35A PLC type S7 Siemens Control panel touch screen Color red Condition very well maintained, like new Load capacity: 40 kg additional load: 20 kg Repeat accuracy + / - 0.3 mm Number of axes 5
used
Carton labeller make: Langguth, own carton conveyor belt drive two-side labeling (left and right) Kartonlängslauf, conveyor height: 620 mm, a Krones glue pump with glue heating incl. glue return line for the second unit, label height and wide adjustable, outer dimensions: 1,600 mm x width 1,500 mm x height length 1,000 mm