car baler used for sale

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

General SKU203U020 LocationBarneveld MakeCarl Canzler Type1640 Ltr. No.15451 Year of construction1974 Pressure Working pressure3 Bar Main Features MaterialMonel Volume1640 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialMonel 2.4360 Capacity1640 Ltr. Vessel sizesdia. 1200x1300 mm Dished topcheck Dished bottomcheck Top connections2x DN50, DN100 OutletDN50 Max. temperature120 °C Information Mounted on legscheck Weight450 kg Floorspace1,5x1,2 m Total height2,6 mPressure vesselsCarl CanzlerTanks > Pressure vesselsBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T507 LocationBarneveld MakeLe Carbone-Lorraine TypeNC210 S No.20146 Year of construction2001 Pressure Vacuum possible jacketcheck Working pressure shell10 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Notified bodyTÜVÖ Heating surface4.3 m² Max. temperature-10/110 °C Shell capacity45,6 Ltr. Shell diameter273 mm Wall thickness shell6,3 mm Max. temperature-10/110 °C Shell connectionsDN40 (2x) Cover connectionsDN80 (2x) Information Total height1,87 m Weight310 kg Floorspace0,5x0,5 mShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

General SKU212T489 LocationBarneveld MakeLe Carbone-Lorraine TypeNK16/42-X-A No.21182 Year of construction2001 Pressure Vacuum possiblecheck Working pressure shell8 Bar Vacuum possible shellcheck Working pressure tubes8 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface14.25 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Notified bodyTÜV Heating surface14,25 m² Tube capacity46 Ltr. Max. temperature-10/200 °C Shell capacity96 Ltr. Max. temperature-10/200 °C Shell connectionsDN50 (2x) Cover connectionsDN50 (2x) Information Total height1,2 m Weight1700 kg Floorspace0,75x0,85 mShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condi ...

General SKUR0893 LocationBarneveld MakeLe Carbone-Lorraine AG (FRA) TypePolybloc NF610G No.17324 Year of construction1989 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface24.5 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface24.5 m2 Max. temperature165 Degr.C. Shell diameter660mm Shell length1900mm Max. temperature165 degr. C Shell connections2x DN150 Cover connections2x DN200 Capacity134.1 Ltr Information Total height2.4 M Weight1500 KG Floorspace1,0x0.9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Re ...

General SKUR0894 LocationBarneveld MakeLe Carbone AG TypePolybloc NF 610 G No.17496 Year of construction1997 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16,3 m2 Max. temperature165 degr.C. Shell capacity80 Ltr Shell diameter660mm Shell length1370mm Shell connections2x DN150 Cover connections2x DN200 Capacity93.8 Ltr Information Total height1,7 M Weight1250 Kg Floorspace0,9x0,9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKUR0892 LocationBarneveld MakeLe Carbone-Lorraine AG (FRA) TypePolyblock NC610G No.22613 Year of construction2008 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface24 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface24 m2 Tube capacity92 Ltr Max. temperature165 degr.C. Shell capacity136 Ltr Shell diameter640mm Shell length1934mm Wall thickness shell10mm Max. temperature165 degr.C. Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS Information Total height2.3 M Weight1800 KG CEcheck Floorspace1.0x1.0 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition - ...

General SKUR0896 LocationBarneveld MakeLe Carbone - Lorraine Polybloc (Fr) TypeNF 610 G No.17367 Year of construction1991 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Heating surface16.3 m2 Tube capacity80 ltr. Max. temperature165 Degr. C Shell capacity94.2 Ltr. Shell diameter660mm Shell length1450mm Wall thickness shell9.52mm Max. temperature165 Degr. C. Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) Information Total height1.7 M Weight1300 Kg Floorspace1.0x1.0 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working conditi ...

General SKU345S781 LocationBarneveld MakeLe Carbone-Lorraine TypeNK22/42-L-F-XBS-1PP/10PS No.10684 Year of construction2000 Pressure Vacuum possiblecheck Working pressure shell3.2 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphilor Tube (Material)Graphilor Surface22.62 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface22,26 m² Tube capacity44 Ltr. Number of tubes:700 Tube diameter9,5 mm Tube length1066 mm Max. temperature-30/200 °C Shell capacity53 Ltr. Shell diameterdia. 9,5x540 mm (x700 st. tubes) Shell length540 mm Max. temperature-30/200 °C Shell connections(2x) DN450 Cover connections(2x)DN80, (2x)DN25 Information Floorspace0,65x0,85 m Total height1,3 m Weight1145 kgS ...

General SKU071F415 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5849 Year of construction1985 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU071F418 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKUR0891 LocationBarneveld MakeLe Carbone-Lorraine AG (FRA) TypePolyblock NF610G No.17474 Year of construction1996 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16.3 m2 Tube capacity80 Ltr Max. temperature165 degr.C. Shell capacity90 Ltr Shell diameter662mm Shell length1370mm Max. temperature165 degr.C. Shell connections2x DN150 Cover connections2x DN200 Capacity93.8 ltr. Information Total height1,8 M Weight1500 KG Floorspace0,9x0,9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition ...

General SKU071F416 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKUR0890 LocationBarneveld MakeLe Carbone AG (F) TypePolybloc NF610G No.130261 Year of construction1990 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16.3 m2 Max. temperature165 degr. C Shell capacity80 ltr. Shell diameter660mm Shell length1380mm Max. temperature165 degr. C Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) Capacity94,2 ltr. Information Total height1,8 M Weight1300 Kg Floorspace0,9x0,9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price comp ...

Two-vessel stainless steel brewhouse with 120 hl knock-out volume. With additional whirlpool and wort treament (wort cooler, wort aeration), Additional title: 120 hl knockout capacity, with whirlpool, wort treatment and CIP-plant, Knockout capacity: 120 hl, Grist: 1800 kg, Voltage: 480 V, Frequency: 50 Hz, Material: stainless steel AISI 304, Base construction: on feet, Features: premasher; agitator; internal boiler; raking arm with spent grain bar, spent grain pump; vessel partial insulated

BAG in BOX filler. Simple and easy-to-use manual filler. Uncapping and capping is carried out mechanically using an auxiliary arm. Stainless steel structure with adjustable table, support for box and wheels. Equipped with a centrifugal pump, electromagnetic flowmeter and touch screen. 220V single phase

Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Under the sealer, it is suitable for packaging products with trays With print point sensor, suitable for transparent, unprinted film and printed film Machine controlled by PLC Machine speed up to 100 cpm, single jaw Product dimensions: length 50/550 mm, width 20/230 mm, height up to 90 mm Film cutting up to 630 mm Suitable heat sealable films such as plain or co-extruded polypropylene (PP), laminated films (e.g. OPP + PE) as well as cold sealable films of appropriate quality; Film roll dimensions: core 76 mm, external 350 mm, width 650 mm The maximum weight of a foil roll is 40 kg Compressed air 6 bar, 1 l/min with air wedges; Power supply 400 V, 50 Hz, Power 5.0 kW Weight 850 kg

We offer you Carnehl semi-trailers (3-axle / tipper CHKSL/AL. Year of construction 2021 (initial registration date 19.08.2021) Condition: Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 06636 Laucha The sale is without warranty Subject to prior sale

Ice cream maker Capacity: approx. 15kg of ice per batch with digital control Cooling system 4-15 liters of water 2 agitator speeds 400 V - 50 Hz - 3 Ph, Power 6KW Height 140cm x Width 60cm

carrying capacity: 3,0 t number of suction cups: 8 suction cup dia.: -- Year of construction 2017 - NEW - exhibition machine In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Suction cups are accommodated and this is independent of the balance Way of working much faster and safer than with conventional manual ones Vacuum systems. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article number: 27-01-190 Manufacturer: Carl Stahl Very good general condition Fully functional Shipping time: All rights reserved. Year of construction: ca.2011 L x W x H: approx. 7000x500x500 Weight: approx. 900kg Length: approx. 6000mm Weight: approx. 900kg Max.load capacity: approx. 32000kg Accessories  Documentation Other accessories on request Price and other technical data on request

Article number: 27-06-188 Manufacturer: Carl Stahl Good general condition Shipping time: All rights reserved. Year of manufacture: unknown L x W x H: approx. 6000x250x900mm Weight: approx. 600kg Load capacity: approx. 10 tons Other accessories on request Price and other technical data on request

Description: Dielectric container ,630 x 1100 x 750 mm Filling height approx. 400 mm table surface area l x w : 500x400 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 2,300 mm

Description: Working surface: approx. 200 x 200 mm With hand lever: approx. 500 mm length weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 660 x 400 x 400 mm

Description: Composed of: - Machine body dimensions 2015x1700x2843 mm - Desk with pc, monitor, HP printer , - External unit ZEISS ACCURA MASS/B, 1600 VA - ZEISS control console - ZEISS calibration sphere - Exchange magazine with Contact Probing System heads and 1 Optical Probing System head - Complete with user and installation manuals , - Complete with instruction manual for CALYPSO software - Various boxes and packaging for component storage  , NOT INCLUDED, EXCLUDED FROM SALE, VISUAL MICROSCOPE z-motion: 700 mm, x-motion: 900 mm, y-motion: 1,200 mm, control: PC, software: CALYPSO, table surface area l x w : 1500x1150 mm, daylight: 1,100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 2,015 x 2,843 mm

Description: Without battery charger The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. loading capacity: 1.5 to, lifting height: 3,300 mm, length of forks: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 2,300 mm, weight approx.: 3,000 kg

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

Technical data: model: RMH DK 50 x 70 machines dimensions without preloading box / side case box L x B x H / in metres: 4.46 x 1.34 x 2.43 loading box dimensions L x B x T / in mm: 1.575 x 840 x 700 parcel dimension in cm: 50 x 70 x material amount engine kW / volt: 22 / 400 ground rams pressure in T: 100 working pressure in BAR: 240 Presszyklus/seconds: 75 weight in kg: 7300 control: By hand / Automatk all machines are delivered in the state kind equipment with hand lever control and oil cooler. Optionally with lateral preloading box and radio control available.

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Waster Baler BTS-MF75 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 75 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2335 x 1040 x 720 mm Transportation height: 1800 mm Machine weigh ...

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Waster Baler BTS-MF60 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 60 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1996 x 1040 x 720 mm Transportation height: 1630 mm Machine weigh ...

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 650 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Waste Baler BTS-MF450 The BTS-MF450 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials users receive a volume reduction of up to 90% and this saves disposal costs. The baling press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 450 kg - Suitable for baling of cardboard, film, clothes, cans, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power supply: 380-400 V (3 Phase) Machine size (H x W x D): 3000 x 1781 x 1196 mm Transportation height: 2300 mm Machine we ...

Multi Chamber Waste Baler Baler BTS-MF75MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90%. - Solid bales with bale weight up to 75 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1969 x 2050 x 872 mm Transportation  ...

Multi Chamber Waste Baler BTS-MF200MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90% - Solid bales with bale weight up to 200 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:16 Ton Motor: 2.2 kW 16 Amp Power suppl: 220-240 V (1 Phase) Machine siz ...

Waste Baler BTS-MF300LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 340 kg - Compact and low design with only 1986 mm height - Suitable for baling of cardboard, film, clothes and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 20 Ton Motor: 2.2 kW 16 Amp Power supply: 220-230 V (1 Phase) Machine size: (H x W x D) 1986 x 1800 x 1100 mm Transportation height: 198 ...

Waste Baler BTS-MF100 The BTS-MF100 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials user receives a high volume reduction up to 90% and also waste disposal cost savings. The baler impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Solid bales with bale weight up to 100 kg - Suitable for baling of cardboard, film, clothes and many materials more - Powerful cylinder for optimal material compaction - Retaining Claws to reduce material spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 6 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2371 x 1388 x 1046 mm Transportation ...

Waste Baler BTS-MF500LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 500 kg - Compact and low design with only 2249 mm height - Suitable for baling of cardboard, film, clothes, cans, PET, Canister, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:50 Ton Motor: 11 kW 32 Amp Power suppl: 380-400 V (3 Phase) Machine size (H x W x D): 2249 x 2041 x 1350 mm Tr ...

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

W863 1 horizontal hydraulic bale press LTG, 1988 pressure about 20 t., feeding by 2 shutfeeders, bale dimension approx. 700 x 700 x 1200 mm, bale weight 80 - 120 kg

PET/Can Baler, Special Baler BTS-MF60hd The BTS-MF60hd Dosen_PET special baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and much more. The press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Compact bales weighing up to 70 kg - Crimps a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross-tying ensures a secure hold of the material in the bale - Fully automatic bale ejection - Maximum safety standards - CE certified - Quality product Made in Europe Press force: 13 t Motor: 2.2 kW 16 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2144 x 1267 x 1328 mm Transport height: 2144 mm Machine weight: 706 kg Cycle time: 24 seconds Noise: 68 dB Bal ...

Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was  ...

Balers, Bramidan B20 – second-hand - : Price from location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical Raw Material Presses B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Press force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Engine (kW) 4.0 Cycle duration avg. (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of lacings 4 Type of Lacing Tape Finished bale light Yes Bale ejection automatic The classic among raw material presses The B20 is versatile and used everywhere. "Dry & Soft" must be the recyclable materials. Particularly suitable for raw materials such as cardboard, paper, cardboard (PPK) and films. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 times on one; enormous ...

Technical data stationary waste compactor with weatherproof operator cabin Manufacturer Geesink Kiggen B.V. Type PD 26/20 Year of construction 2003 Pressing force normal 320 kN Pressing force during post-pressing 405 kN Theoretical capacity 350 m³/hour Cycle time approx. 27 seconds Volume bale chamber 2,6 m³ Volume per pressing cycle 2.2 m³ Press plunger flow in the container 320 mm Dimensions press plunger 740 x 1950 mm Filling opening 1,630 x 1,850 mm (L x W) Standard press opening for container 1250 mm Max. working pressure 330 bar Volume hydraulic tank 225 L Drive cable 11 kW Connection cable 5 x 4mm² Installation dimensions 4,300 x 2,495 mm Weight 3.500 kg Comments: We will not assume liability for the given technical data and possible errors.

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level