car baler used for sale

Load: 3t, length: 7005mm, height: 330mm, weight: 490kg, including documentation.

There are a 500kg-column-mounted slewing crane and a 250kg crane traverse Carl Stahl available.

Carsoe Cleanline Denester with Buffer  The systems decouples the trays fast and with precision in order for them to proceed further into the packaging line. Tray dimensions 130 x 145 mm Cleanline buffer is capable of loading up to 150+ trays a minute automatically.

Refer to code 1008 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

This Bench Top Press from Craver is in machine storage at Plastima Used Machinery. The machine is from 1994 and is in good condition – Brand: Carver – Model: 3393-682 – Year built: 1994

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

Carstens bench grinder for grinding and polishing wood and other materials with two spindles. · Dimensions LxWxH approx.: 1,750 x 700 x 1,100 mm · Further technical data on request, engine: 2,2 kW, Spindle length per side: 175 mm, · Spindle diameter max.: 35 mm, spindle diameter: 35 mm

Additional title: 2-vessel-plant, with pneumatic valves, Volume each tank approx.: 12 hl, Length: 0,8 m, Width: 0,8 m, Height: 2,5 m, Variety / Product: acid, hot caustic , Material: Stainless steel, Features: complete internal piping with pneumatic valves; CIP-prerun pump; steam heating with heating coil at caustic tank

Container Cooling Units (Reefer) (container refrigeration systems) available in good condition. They have the following specifications: - Temp. Range: -20 C° to +20 C° - Mass: 600kg (due to aluminium, steel and copper) - Refrigerant: R-134a - LxWxH: 203x44x224 cm The cooling units are excluding a container. A total of 28 Cooling units available. All 28 cooling units are able to fit in a 40hc container for transport.

Filleting machine for salmon and trout This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably easier. At the back of the machine you will find two access doors  ...

Cooling capacity: 452 kW (12/7 — 35°C) Year of manufacture: 2008 Refrigerant circuit: 2 pcs. Number of fans: 8 psc. Options: With economizer Type of refrigerant: R134A Compressors: 2 pcs. Carlyle (screw) Heat exchanger: shell-and-tube Dimensions: 4,8 x 2,25 x 2,3 m. Weight: 4 776 kg. Condition: Excellent

Cooling capacity: 452 kW (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Number of fans: 8 psc. Options: With economizer Type of refrigerant: R134A Compressors: 2 pcs. Carlyle (screw) Heat exchanger: shell-and-tube Dimensions: 4,8 x 2,25 x 2,3 m. Weight: 4 776 kg. Condition: Excellent

Cooling capacity: 331 kW (12/7 — 35°C) Heating capacity: 364 kW (40/45 — 7°C) Year of manufacture: 2008 Options: Heat pump, Hydraulic module Refrigerant circuit: 2 pcs. Number of fans: 6 pcs. Type of refrigerant: R410A Compressors: 6 pcs. Danfoss (scroll) Heat exchanger: Shell and tube Hydraulic module: Dual pump, Expansion vessel Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 639 kg. Condition: Excellent

Cooling capacity: 275 kW (12/7 — 35°C) Heating capacity: 307 kW (40/45 — 7°C) Year of manufacture: 2007 Options: Heat pump, Hydraulic module Refrigerant circuit: 2 pcs. Number of fans: 5 pcs. Type of refrigerant: R410A Compressors: 5 pcs. Danfoss (scroll) Heat exchanger: Shell and tube Hydraulic module: Dual pump, Expansion vessel Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 147 kg. Condition: Excellent

Cooling capacity: 452 kW (12/7 — 35°C) Year of manufacture: 2008 Refrigerant circuit: 2 pcs. Number of fans: 8 psc. Options: With economizer Type of refrigerant: R134A Compressors: 2 pcs. Carlyle (screw) Heat exchanger: shell-and-tube Dimensions: 4,8 x 2,25 x 2,3 m. Weight: 4 776 kg. Condition: Excellent

Cooling capacity: 180 kW (12/7 — 35°C) Year of manufacture: 2016 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Number of fans: 4 psc. Type of refrigerant: R410A Compressors: 4 pcs. Danfoss (scroll) Dimensions: 2,5 x 2,26 x 2,3 m. Weight: 1 272 kg. Working hours: 184, 925, 913 h. Condition: Excellent

faceplate diameter: 1250 mm swing diameter: 1600 mm turning height: 1000 mm faceplate diameter: 1250 mm grinding diameter: 00 mm grinding height: 1000 mm control: Siemens 840 C total power requirement: 60 kW weight of the machine ca.: 47 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tribloc (rinser-filler-capper), with vacuum pump pre-evacuation, manufacturer: Cime Careddu Italy, type Gold DPS 6-6-1, 6 rinsing nozzles, 6 filling valves, 1 head crown corker, year of construction: 2019, capacity 350-1,200 bph with height adjustment, with 3 bottle formats, with labeler self-adhesive labels, with bottle transport, turntable. Isobaric. Total hours: approx. 200 hours. Tribloc (Rinser-Filler-Crowner), with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: Gold DPS 6-6-1, 6 head rinser nozzles , 6 filling valves, 1 head crown corker, Year: 2019, Capacity 350-1.200 bph, with hight adjustment, with 3 bottle formats, with labeller self adhesive labels, with bottle conveyors, rotating tables. Isobaric, About 200 operating hours.

Ref. -No.: 10157 Manufacturer: CARL ZEISS Year of construction: 1997 Type of control: HP 9000 Serie 700 Control: Betriebsystem HP-UX.9.05 Storage location: Halberstadt Country of origin: Deutschland Turntable: 1000x2100 mm Machine weight: 4.800 kg Machine Height: 3050 mm Table height above the floor: 850 mm X-Axis: 850 mm Y-Axis: 1800 mm Z-Axis: 600 mm Further information: Three coordinate measuring machine Microcomputer control X-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mm Passage in height approx. 750 mm

Cooling capacity: 988 kW (12/7 — 35°C) Year of manufacture: 2007 Refrigerant circuit: 2 pcs. Number of fans: 16 psc. Options: With economizer Type of refrigerant: R134A Compressors: 2 pcs. Carlyle (screw) Heat exchanger: shell-and-tube Dimensions: 9.6 х 2.26 х 2.3 m. Weight: 8 620 kg. Working hours: 38628/42099 h. Condition: Excellent

Vertical lathe CARNAGHI for sale Technical data: Maximum turning diameter without side carriage: 5000 mm Platform diameter: 4000 mm Maximum turning height above the platform: 4200 mm Maximum RAM stroke: 1740 mm Maximum crossmember stroke: 4200 mm Maximum workable weight: 60.000 kg Spindle motor: 60 Kw Voltage: 380 Volt Approximate weight: 85,000 kg 12-position tool magazine Motorized milling and drilling head Clamp guides: n° 12 Clamps: n° 4 Rotation speed: 1 ÷ 44 rpm/1' CNC: Siemens 840D

CARRIER 30 HXC 375 Brand:CARRIER Type:30 HXC 375 Stock number:M23-4646 Cooling capacity:1,286 kW Application:Cooling Refrigerant:R134a Refrigerant Content:119 + 137 kg Voltage:400 Volts Power consumption:296 kW Dimensions:4533 x 1015 x 2112 mm Weight:5,300 kg Year:2002 Number in stock:1 piece(s) Price:On request Description: Water-cooled Carrier chiller with 4 screw compressors distributed over 2 circuits. This machine has a Carrier ‘Pro Dialog Plus’ controller. Mentioned capacity at a water temperature of +12/7°C and a condenser water temperature of +30/35°C. Visit our website: used-refrigeration

CARRIER 30 HXC 375 Brand:CARRIER Type:30 HXC 375 Stock number:M23-4647 Cooling capacity:1,286 kW Application:Cooling Refrigerant:R134a Refrigerant Content:119 + 137 kg Voltage:400 Volts Power consumption:296 kW Dimensions:4533 x 1015 x 2112 mm Weight:5,300 kg Year:2003 Number in stock:2 piece(s) Price:On request Description: Water-cooled Carrier chiller with 4 screw compressors distributed over 2 circuits. This machine has a Carrier ‘Pro Dialog Plus’ controller. Mentioned capacity at a water temperature of +12/7°C and a condenser water temperature of +30/35°C. Visit our website: used-refrigeration

Manufacturer: Carmet, Type: TRM 25, Year: 1999, Length mm: 2500, Working widht mm: 500, Total hight mm: 900, Drive power kW: 0,3, Year :1999

CARRIER 30 HXC 090 Brand:CARRIER Type:30 HXC 090 Stock number:M23-4643 Cooling capacity:315 kW Application:Cooling Refrigerant:R134a Refrigerant Content:33 + 34 kg Voltage:400 Volts Power consumption:122 kW Dimensions:2558 x 980 x 1800 mm Weight:2,180 kg Year:2014 Number in stock:1 piece(s) Price: On request Description: Water-cooled Carrier chiller with 2 screw compressors distributed over 2 circuits. This machine has a Carrier ‘Pro Dialog Plus’ controller. Mentioned capacity at a water temperature of +12/7°C and a condenser water temperature of +30/35°C. Visit also our website: used-refrigeration

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!

Sell a completely overhauled Pastomaster 120. It has been equipped with a robust new Siemens PLC control system and is therefore completely free and easy to adjust by the user. No more expensive electronic components from Carpigiani that can break. All times and temperatures can be adjusted individually. The most reliable robust industrial technology! Just fresh A/C service with current refrigerant R422D, new wheels, new seals. The lid is also a bit broken, but can also be replaced if desired. Of course, an invoice can also be issued.

Oven Make: Carbolite Model AX60 395mm high x 400mm wide x 420mm deep 220/240 volts Single phase

Filter centrifuge used. for filtering, washing, separating, drying, rinsing in chemistry, biotechnology or pharmaceuticals Manufacturer: CEPA Carl Padberg Zentrifugenbau GmbH Type: TZ 5 Year: 2013 Drum diameter: Ø 500 mm Filling volume: max 35 l Filling weight: max 50 kg Drive: 5.5 kW 230/400 V Size approx. 1400 x 1000 x 1200 mm + control cabinet 1200 x 500 x 1450 mm Subject to changes and errors in the technical data, information and prices as well as prior sale.

Plasma cutter, plasma cutter -Max. Cutting current: 120 A -Mains voltage: 3x400 V -up to a material thickness: of 30 mm -Incl. Gas mixing console -Industrial execution -Weight: 600 kg

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket, slot clamp -Clamping height: 60 - 370 mm -Clamping depth: 65 mm -Price: per piece -Number: 2 Stück -Dimensions: 290/80/H450 mm -Weight: 9.6 kg/piece

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

TIG welding machine, welding machine, TIG welding machine -WIG welding machine direct current -Max. Welding power: 400 A. -Water-cooled -Incl. Ground cable -Gas valve -Dimensions: 610/1140/H930 mm -Weight: 310 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Chuck size: Ø 250 mm -Rezess diameter: 205 mm -Pitch circle: 226 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Speed: 3.7 rpm -Power: 0.55 kW -Diameter shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 760/220/H250 mm -Weight: 42 kg

Cooling capacity: 331 kW (12/7 — 35°C) Year of manufacture: 2009 Refrigerant circuit: 2 pcs. Heat exchanger: shell-and-tube Compressors: 5 pcs. Danfoss (scroll) Number of fans: 6 psc. Type of refrigerant: R410A Dimensions: 3.50 x 2.30 x 2.40 m. Weight: 2 850 kg. Condition: Good

Cooling capacity: 619 kW (12/7 — 35°C) Year of manufacture: 2007 Heat exchanger: shell-and-tube Refrigerant circuit: 3 pcs. Number of fans: 10 psc. Type of refrigerant: R410A Compressors: 9 psc. Danfoss (scroll) Dimensions: 6.00 x 2.30 x 2.40 m. Weight: 5 587 kg. Working hours: 3120/1429/1419/3389/712/709/823/8553/814 h. Condition: Good

Cooling capacity: 263 kW (12/7 — 35°C) Year of manufacture: 2008 Refrigerant circuit: 2 pcs. Number of fans: 4 psc. Hydraulic module: 2 pcs. Pump, expansion vessel Type of refrigerant: R410A Compressors: 4 pcs. Danfoss (scroll) Heat exchanger: shell-and-tube Dimensions: 2.40 x 2.25 x 2.30 m. Weight: 2731 kg. Working hours: 13320/11010/19420/15590 h. Condition: Excellent, New condenser

Sheet straightening machine The maximum thickness of the sheet is 40 mm; The minimum thickness of the sheet is 8 mm; The maximum sheet width is 3200 mm; The number of working rollers is 9; Number of support rollers 2; Number of pressure rollers 2; The engine power is 300 kW Length – 12300 mm; Width – 3200 mm; Height – 10840 mm; Total weight – 420,000 kg;

Carbolite Gero AX120 Heating Oven Original price 4561 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 128 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 26 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 495 x 500 x 520 External dimensions H x W x D (mm) 640 x 790 x 665 Load per grid/total 10/40(kg) Air change per h 14 Max. power (W) 2000 Holding pow ...

Carbolite Gero AX60 Heating Oven Original price 3844 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 66 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 25 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 395 x 400 x 420 External dimensions H x W x D (mm) 540 x 690 x 565 Load per grid/total 10/30 (kg) Air change per h 28 Max. power (W) 1500 Holding powe ...

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Sell Carat wall saw type W3011. Blade diameter: 300mm The machine is in good condition, functional and tested.

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

Used Isobaric Monoblock CIME CAREDDU for Cans 1200 cph Introduction The Used CIME CAREDDU isobaric filling monoblock for cans 1200 cph is a specialized filling equipment It is in fact designed for the efficient processing of cans This model called DIAMOND 6 1 was thus introduced in 2015 and offers a production capacity of 1200 cans per hour Technical Details and Functionality in the Isobaric filling monoblock for cans Built by CIME CAREDDU SRL the DIAMOND 6 1 isobaric monobloc was designed to handle standard 33 cl cans The machine indeed operates in a clockwise direction and incorporates safety guards to ensure safety during the bottling process A fundamental aspect of this machinery is definately its operational status It is currently in operation demonstrating that it is extremelly reliable and has a great durability over time The main product for which it has been used is beer a secto ...

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test