car baler used for sale

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

Slotted Weight Support Bar, Commercial Weights, Test Weights PAGUS 500 g Beam Bar + 10 pcs Slotted Weights Brass a 500 g Accuracy: M3 Diameter Ø 90 mm Dimensions: 90 x 90 x 410 mm

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Slot Weight Carrier Bar, Commercial Weights, Test Weights PAGUS 250 g Beam Bar + 14 pcs Brass Slot Weights a 250 g Accuracy: M3 Diameter Ø 50 mm Dimension: 50 x 50 x 810 mm

Tape: PVC or PP; width max. 50 mm; core 76mm; 40-55 mm overlap. Transport speed: 20 m/min. Operating temperature: 5 to 45 °C. Connection: 230 V/1~N/50 Hz, 0.6kW Degree of protection: IP54. Watts: 240 watts

Slot Weight Beam Bar, Commercial Weights, Test Weights PAGUS 100 g Beam Bar + 20 pcs Brass Slot Weights a 100 g Accuracy: presumably M3 diameter 33 mm Bore of weights: Ø 8 mm Slot of weights: 6 mm Carrier rod: Ø top 6 bottom 7 mm Dimensions: 33 x 33 x 710 mm

Pneumatic cylinder, standard cylinder with locking cartridge FESTO DNC-40-35-PPV-A-KP 16334 KP-16-1000 stroke: 35 mm rod diameter Ø 16 mm with locking cartridge ! Dimensions: 400 x 110 x 60 mm

Cardan shaft, drive shaft ELBE Length: approx. 940 - 1040 mm 150/8-S=935/X=110 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.033.0.033.2018.033/8-S=935/8-S=935/8-S=935/8-S=935/8-S=935/8 -S=935/8-S=117.110.0 shaft Ø 64 mm shaft outside Ø 100 mm flange Ø 150 mm New !' Dimensions: 950 x 150 x 150 mm

A lid/tray packer from the manufacturer Somic is sold. The SOMIC Lid/Tray Packer is suitable for open cartons and lid/tray packaging. The facility has been used very little and is in absolute top condition.

faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1250 mm slide adjustment: 800 mm Control: Siemens type: 840 c power capacity: 56 kW : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

A cardboard stand for pre-glued cardboard tubes and an associated carton sealer are sold. The system was only serviced and some things were renewed by the manufacturer because the purchase of the new line was questionable. Conveyor belts are also supplied in addition to the carton erector and carton sealer. Photos to follow

For sale is a used SOMIC packaging system with 2 fan conveyors (=2 formats). Tubular bags were packed, but other products that arrive horizontally from an infeed conveyor can also be packed. The Somic has a height-adjustable levelling belt where the contents of the tubular bags can be distributed before packaging. Somic had worked with Elau technology in the control area and Elau discontinued these servos and controllers. The Somic can be equipped with new Siemens control technology 1500 and undergo a general overhaul.

The Moravek BC15 is a single column carbonator designed for inline pre carbonation of beer or Cider (as well as mineral water) prior to counterpressure filling. Carbonation range 2g/litre to 8g/litre. This carbonator can be used for automatic saturation or re-saturation of water, mineral water, wine, juices, pre-mixed drinks and beer.

Continuous body press press press 2400/1500/650mm Automatically adjusts to the respective body size Works perfectly

• For packing blisters in folding box cartons Output max. 500 cartons/min, the max. speed depends on the format/product Folding carton format range max. W 80, H 90, L 155 mm For double-sided offset or same-sided tuck-in flaps Blister stacking device Max. 10 blisters per stack / max. height 85 mm Blister refill chute, manual 3 suction arms for folding box pick-up and counter-suction for pre-breaking MB-Bäuerle CAS 21/4 net leaflet folding and inserting machine from the magazine Color embossing printing unit on both sides Faulthy package ejection with counter-check HMI B+R Automation, IPC Beckhoff Servo controller Elau MC-4 with control unit Elau C600 Drive 400V/50Hz, rated current 6A / back-up fuse 25A Various accessories such as format parts / spare parts Infeed blisters via Flexlink conveyor

• overhauled • suitable for installation in a folding box cartoner type C 2205 • 2-fold arm

description: Type of transport chains (pitch): roller, pitch 190mm/140mm roller carriage without motor Nominal width and installation dimensions can be changed propulsion: 0,55 KW motor with brake Usable width: 1170 mm transport size: 2960 x 1888 x 1300 mm Installation dimension: 10400 x 1580 x 650 mm weight (m) [kg]: 1500 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger ...

propulsion: 0,55 KW motor with brake, 1360/47 r/min description: Nominal width and installation dimensions can be changed availability: immediatelly Usable width: 1250 mm transport size: 2500 x 1700 x 1330 mm Installation dimension: 9060 x 1580 x 660 mm weight (m) [kg]: ca. 1500 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in ...

Offset printing press Job card for Manroland offset presses, used. Can ship worldwide.

Marchesini 3G20100610 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 130 kg

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999

Marchesini RIBATINO RIB. 730 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 120 kg

Key data: 2000 mm, 2400 mm, 1500 mm

Stock number: 3988 CNC CAROUSEL LATHE Manufacturer: ALEX TECH VIPER, Type: VTL 20/24 M Machines NO.: 7640901011, Year of manufacture: 2008 Specifications: Face plate diameter 2000 mm Large turning diameter 2400 mm Face plate speeds ( ) 1-73 / 1-200 2 step rpm Large workpiece height 1500 mm Gr. face plate load 20000 kg X- Movement 1800 mm Y- Movement ( Cross Beam ) 800 mm - 5 Sep each 200 mm Z- Movement 1000 mm C-Axis 0.001 degree Ram size 230 x 230 Power 11/15 Driven tool revolutions 30-2000 rpm Tool Changer 18 (9 Turning 9 Milling ) ISO 50 Stations Main motor 45 Voltage 400 volts Einständer. CNC Control: Fanuc Oi-TD Spindle Hours 10453 Accessories: Chip conveyance. New 2025 Cooling water system. Various accessories. Cooling in the Spindle Delivery time August 2025  ...

faceplate diameter: 1600 mm swing diameter: 1800 mm turning height: 1500 mm control: Siemens chip conveyor: Tool changer: type: 840 D mm workpiece weight: 10000 kg slide adjustment: 1000 mm ram head dimension: 240x240 mm turning speeds: 250 U/min main drive: 45 kW Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data fo ...

Inv. Num. : 8297 Type: F146 Producer: SIAT Created: 2004 Parameters: Box size: 580 x 380 x 416 mm

Max. workpiece diameter 400 mm Max. workpiece length 800 mm Max. bar capacity diameter 80 mm Max. X-axis stroke276 mm Max. Z-axis stroke 755 mm Controller Siemens Spindle speed 4000 rpm With C axis

Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,

Key data: 3000 mm, 7000 mm, 3000 mm

Stock number 1020041 Machine Type: CNC Carousel Lathe Make HANKOOK Type VLC 30/70 Year of construction 2004/2016 retrofit Control type FANUC 18i-TB Face plate diameter 3,000 mm Max. turning diameter 7,000 mm Max. turning height 3,000 mm Max. workpiece weight 40 ton Max. speed of face plates (rpm) 1-80 Feed rate (mm/rev) max. 2,000mm/min Rapid traverse max. 8,000 mm/min. Total power (KW) 60/75 Kw Information With C-axis and driven tools Me WzW for 16 tools With chip conveyor

1 A+F butter carton packaging machine for 10 to 30 g parcels Capacity: 30,000 parcels/h packed in outer cartons Masch. Item No. 98097-A but without butter molding machine, is defective

Fully automatic horizontal cartoning machine type Vario 7.5" (built in 1997) The continuously operating cartoning machine is suitable for erecting, filling and sealing pre-glued folding cartons. The machine has been completely overhauled, i.e. all mechanical components have been completely renewed, the electrical equipment is state-of-the-art (retrofit). It is equipped with a hot glue seal. Capacity: up to 150 folding cartons/min The following folding box dimensions can be processed: A 25-150mm W 15-100 mm H 55-230 mm Machine is set up to customer format(s) and delivered ready for use. The following additional options are possible: Various feeding devices for products such as bags, blisters, bottles, etc. on request Good opportunity for startup companies Machine can also be rented

The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid-sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the box are first closed, only then is the box glued. Carton formats: Length 150 – 600 mm Width 115 – 490 mm Height: 110 – 510 mm Specifications: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.

Our VOGEL MH-FJ-1A carton sealing machine is a reliable machine for relieving the burden on employees and getting started with efficient packaging. It has a side drive belt system as well as an additional drive belt in the upper area of the machine. The advantage lies in the stability – high cartons cannot tilt to the side. Carton formats: Length 150 – ∞ mm Width 120 – 480 mm Height: 120 – 480 mm Specifications: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.

Horizontal cartoner 60-ECO – compact, powerful and flexible Lack of space is a common issue in the food industry – with the 60-ECO horizontal cartoner, we offer a compact and powerful solution! The machine has been specially developed to efficiently process a wide variety of folding carton sizes in a minimum of space. With a basic length of only 2,284 mm (expandable depending on the desired conveyor belt length), it achieves an output of up to 60 folding cartons per minute. Technical highlights: Product feed adaptable: The feed belt can be individually adapted if desired. Automatic product clocking: We can design and fully integrate automatic metering of the products. Packaging area: Processing of folding cartons up to 220 mm long (A), 120 mm wide (W) and 400 mm high (H). Proven technology for maximum reliability: Lasbmmxgqsmftm Nonsb Control: Siemens PLC syste ...

Our new Model 90-HCI cartoning machine – powerful, flexible and efficient The new 90-HCI cartoning machine impresses with its high performance, precise product guidance and maximum efficiency – even for complex packaging tasks. It has been specially developed for applications in which several products or bags are grouped together and then automatically inserted into a folding box. This makes the 90-HCI particularly suitable for packaging lines with high throughput and variable product diversity. The machine achieves a maximum output of up to 90 cycles per minute. The carton sizes that can be processed vary depending on the grouping and arrangement of the products on the feed belt: Box width (A): 40–310 mm Box height (W): 15–100 mm Box depth (H): 80–350 mm The 90-HCI is the ideal solution for demanding packaging processes where efficiency, flexibility and ...

Vertical continuous cartoning machine – fast, efficient and precise Our vertical cartoning machine is specially designed for continuous high-speed applications. It is ideal for the automatic packaging of bulk materials, especially in combination with a multihead weigher system. Thanks to its continuous operation, the machine achieves a maximum output of up to 100 packs per minute – reliable, gentle on the product and efficient. Specifications: Capacity: up to 100 packs/minute Carton size range: Width: 60–180 mm Height: 30–85 mm Depth: 130–260 mm Dosing system: Multihead-Weigher (multihead weigher) The vertical design enables particularly space-saving integration into existing lines, while the continuous carton handling ensures uniform product feeding and very smooth running. This machine is the perfect solution for companies that demand high pac ...

turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm total power requirement: 97 kW weight of the machine ca.: 25000 t dimensions of the machine ca.: m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V -  ...

faceplate diameter: 2800 mm swing diameter: 3200 mm turning height: 1500 mm slide adjustment: 1200 mm turning speeds: 50 U/min Control: Sienens 840 D side head - cross travel: 900 mm power capacity: 55 kW : workpiece weight: 16 t total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital Display The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling  ...

Intermittent Carton Packaging Machine ZHJ-150 Exhibition Machine/ Exhibition Machine Multifunctional Cartoning Machine ZHJ-150 ZHJ-150 automatic cartoning machine is suitable for packaging aluminum PVC blisters, round bottles and special bottles, Shaped bottles and similar products. Package inserts can be folded automatically, cartons can be erected, products can be fed and the cartons can be resealed (offset plug-in closure). Embossing can be made on the cartons. This machine has PLC control, with each station monitored by photoelectric sensors. If there is a problem detected during operation, the machine will automatically stop and display the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be viewed at any time in 73084 Salach/Germany and tried out with your products. Dependin ...

Packaging capacity: 60 cycles/h, max. lifting load: 5kg, carton type: single-wall carton boards, carton dimensions X/Y/Z: 1200mm/800mm/2mm, max. stacking height: 890mm, operating pressure: 6bar, air consumption: 7l at 6bar per cycle. Documentation available. On-site inspection is possible.

Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

A carpet tile cutting machine is available. Working width: 2000mm, machine dimensions X/Y/Z: approx. 2100mm/4500mm/2500mm, weight: approx. 3000kg. The machine cuts carpeting into 4 square tiles using automatic recognition by cameras (year of manufacture: 2005). The machine was part of a larger system and is therefore no longer able to run independently. In order to be able to run independently, the system must be completely rebuilt/reprogrammed in terms of PLC technology. Documentation available. On-site inspection is possible.

Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible.

Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approximately: width 500 mm x height 500 mm; length unlimited. -Double-sided closure of the packages at the top and bottom. -Different cardboard formats are adjusted in height and width via cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. -Working height of the machine is infinitely adjustable. The machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.

Technical data and features: -Made in Germany -Type Standard Shepherd Series 14/6-2 -Made of high-quality stainless steel sheet -Dimensions length 425 x width 275 mm -Material thickness: 1.5mm -Weight: approx. 1.5 kg -315 shape punches for bayonet closure with the plastic clips -The currently available used workpiece carriers are partly electropolished and partly marked. We offer used and new workpiece carrier systems with different plastic clips, also as custom-made products and in different sizes. In addition, the appropriate basket systems and automation technology are also available if required.

A Somatech carton and tray erecting machine is available. Cycle output: 60 cycles/min. The machine has been fitted with new tools and a new linear unit. Documentation available. On-site inspection is possible.

A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025.