capsule filling used for sale

Vacuum filler Manufacturer: Handtmann Model: VF 628 Efficiency: up to 6000kg/h Electric power: 18kW Voltage: 400V 50Hz 3N Filling pressure: up to 72bar Portion range: 5-100.000 g Hopper capacity: 200 liters Dimensions: 2200x1350x2100mm

Hydraulic Piston Filler Manufacturer: Talsa Model: F25s Robust stainless steel construction Lid and piston in solid s/s sheet of great thickness and resistance Easily removable piston Automatic piston decompression Easily accessible speed control Independent hydraulic oil reservoir Volume: 25 liters Capacity: 20kg Electric power: 1.1kW Dimensions: 53x57x124cm

Height 1700 mm Width 650 mm Length 900 mm Capacity 50 l Power supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

We are selling here a vacuum filler from the manufacturer Frey, type E120 in a very good used and functional condition. The machine runs on 400 volts, 120 litre hopper, LCD control, clipper connection, for filling and portioning, workshop tested, immediately ready for use, dimensions W/D/H 85/60/170 cm, others on request.

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

The Verbufa skewer machine is the best solution for the production of (meat) skewers. A skewer is automatically inserted into the dosed meat. Products such as kofte, kebab, cevapcici and meat rolls can be produced easily, cleanly and quickly with this skewer machine. The Verbufa skewer machine is connected directly to the outlet of a Handtmann vacuum filling machine, so that the weight accuracy of the portions is very high. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration/Demo Machine

Height 1950 mm Width 1800 mm Length 1500 mm Weight 1400 kg Power supply: 400V 50Hz 3N Total power 18 kW Loading Loading integrated into the machine Description Vacuum filler Handtmann VF 622 in a set with a grinder GD 93-3

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

Cyclone for Gutting Machines This cyclone is designed for collecting intestines from Baader 142 Fish Gutting Machine (from several machines simultaneously) or similar machines where waste collection is required using a vacuum. Diameter: 1500 mm, Cylinder height: 1880 mm, Cone height: 530 mm, Total height (with legs): 3440 mm +/- 100 mm (legs are adjustable). Bottom flange: 275 mm outer diameter, 150 mm inner diameter. Connection flanges: 340 mm outer diameter, 215 mm inner diameter.

Manufacturer: Handtmann Intestinal Holding Device Type 60-6 ( for long filling tube ) for filling machine HANDTMANN VF 50, 80, 100, 200, 300 i all VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Features: Straight filling, dispensing, pooling Hydraulic trolley lifter integrated in the machine body Fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 18 blade rotor 200 storable programs Clip machine connector Hungarian menu Optional ballast with reservoir Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 45 bar Vacuum pump: 16 m³/h Hopper size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 11 kW Weight: 1400 kg

Straight filling, dosing, pooling trolley extractor 14 blade rotor fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 200 storable programs clipping machine connector Hungarian menu Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 40 bar Hopper size: 250 L 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity: 5-9 999,9 g programmable in 0,1 g increments Speed (max): 500 doses/minute Voltage: 400 V, 3F/50-60Hz Power: 8 kW Weight: 700 kg

Used-refurbished equipment 6100 kg/hour capacity 70 bar filling pressure filling/dispensing/storage Features: Straight filling, dosing, pumping Hydraulic trolley lifter integrated in the machine body Reservoir feed Fully stainless self-supporting frame structure 12" touchscreen with foldable protective cover 14 blade rotor 200 storable programs Clip machine connector Hungarian menu Technical data: Filling capacity: 6 100 kg/hour Filling pressure: 70 bar Vacuum pump: 16 m³/h Funnel size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 25 kW Weight: 1400 kg

- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freque ...

Performance data: - Filling capacity: max. 3.000 kg/hour - built-in computer for control and regulation, - 99 program positions, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display Technical data: Power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, frequency: 400V, 50Hz, 3 phase Max. filling pressure: 35 bar Reservoir head, complete - Maximum output 400 ppm - 1-10 turns infinitely variable - synchronous drive for the bowel support - with standard accessories and 3 filling tubes.

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF200B CODE: N80/35 Technical description: Throughput rate: Up to 5.000 Kg/ h Power supply: 380/440 V - 50/60Hz Power: 6,5 Kw Dimensions: 2000 x 1350 x 2200 mm

STUFFER HANDTMANN, TYPE: VF80 AND SAUCE DOSING MACHINE HANDTMANN 6 HEADS Technical description: Stuffer (x2): Handtmann VF 80 (1) ID-1638 TYPE: VF80 10-5N Serial number: 637 Power supply: 380 V, 50 Hz, 9,55 A, 3,55 kW Dimensions: 940 x 900 x 1600 mm (2) ID-1640 TYPE: VF80 N50/35 Serial number: 221 Power supply: 380 V, 50 Hz, 10.85 A, 4 kW Dimensions: 1050 x 700 x 1600 mm Sauce dosing machine, Handtmann ID-1639 Heads number: 6 Dimensions: 2300 x 1050 x 1650 mm

STUFFER + PORTIONER WITH SAUSAGE HANGER, HANDTMANN Technical description: Stuffer type: Handtmann VF100B Portioner type: Handtmann AL 242-01 Hanger type: Handtmann 242-16 Power supply: 380-440 V / 50-60Hz https://youtu.be/ZxAf2uRbDf4

HAMBURGER LINE – HANDTMANN VF-612 + VERBUFA TYPE MBF-1 MACHINE AFTER GENERAL OVERHAUL YEAR OF PRODUCTION 12-2012 – START 2013 CURRENTLY UNDER TECHNICAL INSPECTION CONDITION OF NEW MACHINES WARRANTY FOR COMPONENTS AND MECHANICAL PARTS 3 - MONTHS

Vemag vacuum filler -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Weight: 1300 kg -Condition: Used in very good condition, ready to work

Vemag servo crimper in very good condition incl. accessories

HANDTMANN VF 620 Filling, Portioning. Year 2002

Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional

Type: Robby Serial number: 1390303 Year of construction: 2022 Pump capacity: max 2300 kg/hr Hopper: 105 litre Vacuum pump: Busch 16 m³/h Power: 3 x 400V, 50Hz, 5kW Dimensions: 900 x 1200 x 1950 mm Weight: 425 kg Filling, portioning and linking Including 859 linker and DHV937 casing holder Only 52 running hours!

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

Filling machine Frey Heinrich 20, Piston filler with a capacity of 20 litres, machine mounted on a mobile base, Connection 400V, dimensions LxWxH approx. 60x55x120cm, very good used condition, fully functional

Handtmann VF 50 incl. turning device and complete accessories

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...

Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...

Vemag HP30E Vacuum Filler  Complete with loader

Used Handtmann twisting and unscrewing line type PVLH 228 Plus. Line for sausages in natural intestines, collagen and artificial casings. • PLUS NEWS AND OPTIONS: Natural bowel pusher, minimal setup time, easy operation and much more... • STEP-BY-STEP PROCESS: portioning – twisting – twisting with butterflies – Equal portion length – hanging • TOP QUALITY PRODUCT thanks to gentle twisting with butterflies and a twisting unit • LARGE VARIETY OF PRODUCTS thanks to a wide range of applications and calibers and different stations butterflies spinning • FLEXIBILITY due to a variety of suspension module options: grouping, number of loops and distances between hooks, empty or full portions • HIGH PERFORMANCE thanks to rotating twin-funnel head • COST-EFFECTIVE by changing the cover in less than 2 seconds • SIGNIFICANT COST REDUCTION due to the highest w ...

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

Model VM400-30 Jaar 1998 Conditie Gebruikt Serienummer: 1990 Voorraad nummer: 3062B Belt width: 400 mm Capacity: max 30 strokes/min Hopper; 100 litres Belt speed: 1.5 - 15 m/min Compressed air: 6 Bar, 300 l/min Power: 3 x 380V, 50Hz, 5kW Dimensions: 2150 x 750 x 1750 mm Weight: 640 kg

Used Conveyors as needed and at your Layout with Motors, Curves, etc.

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

for 200, 250 and 330 ml

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.