capping machine used for sale

grinding diameter: 100 mm grinding length: 400 mm centre height: 100 mm z-axis: 425 mm table speed -stepless-: 0,05 - 5,00 m/min workpiece spindle head rotation speed: 90 - 1.000 U / min. grinding head swivelling: -2 - +30 Grad tailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/min grinding motor: 3,70 kW dimensions of grinding wheel: 350 x 50 x 127 mm total power requirement: 7,00 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

spindle diameter: 135 mm x-travel: 950 mm distance between columns: 1100 mm y-travel: 700 mm cross rail adjustment - vertical: 780 mm quill travel: 300 mm max. distance between table and spindle-nose: 1000 mm table surface area: 1100x842 mm table load: 1500 kg speeds: 40-2000 U/min adjustment speed: 5-1500 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rex vacuum Filler -Type: RVF 736 -Power: 15 kW -Capacity: 3600 kg/h -Serving speed: up to 800 portions/min -Portion range: 5-9999.9 grams -Operated hours: 29337 -Linking and holding device included -Additional funnels included -With loading -Dimensions: 2100 x 1230 x 1950 mm -Power supply: 400V 50Hz 3Ph -Condition: Used in very good condition, ready to work

Key data: 350 mm, 650 mm, 3500 1/min

CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

POLYBAG PRINTING MACHINE VJ1530 STD 70m, IP55, Positive Air Pump,3m PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

Drycooler Cabero -Type: S-GC/DED 095 KA/2X4E -Cooling capacity: 350-400 kW -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 6 -Condition: Used in very good condition, ready to work

Robopac Pallet Wrapper – HELIX HS40 Machine Type: Robopac HELIX HS40 – Automatic Rotary Arm Stretch Winder Technical data: • Installed power: 4.5 kW • Voltage: 400 V / 50 Hz + N • Air consumption: 150 Nl/min • Operating pressure: 6 bar Product data: • Pallet size: 1,200 × 800 mm • Load size (variant 1): 1,000 × 700 mm • Load size (variant 2): 1,280 × 1,000 mm • Winding height: min. 250 mm – max. 1,600 mm • Loading weight: min. 50 kg – max. 1,500 kg ______________________________________________________________________ _ Robopac Pallet Stretch Wrapper – HELIX HS40 Machine type: Robopac HELIX HS40 – Automatic rotary arm stretch wrapper Technical specifications: • Installed power: 4.5 kW • Voltage: 400 V / 50 Hz + N • Air consumption: 150 Nl/min • Working pressure: 6 bar Product specifications: • Pallet size: 1200 × 800 mm  ...

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines

PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm

380 V 16 A Speeds 100 - 1250 rpm Length 1 m Width 0.8 m Height 1.40 m Table converted to pneumatic control.

Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Working hours : 8000h Simple station Double head with 100 mm center distance. (2 x 500ml)

PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Working hours : 24,000h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.

GR2A 7 (7 kw) - 2024 - 9 months warranty GR2A 20 (20 kw) - 2016 - 6 months warranty GR1AC 30 (30 kw) - 2022 - 9 months warranty GRAV 45 (45 kw) - 2015 - 6 months warranty GRAC 55 (55 kw) - 2010 6 months warranty GR1A 60/X (60 kw) - 2022 - 9 months warranty GR1AC 120 (120kw) - 2013 - 6 months warranty GRAC 125 (120kw) - 2012 - 6 months warranty IFGAV 200 (200kw) - 2024 - 12 months warranty GR1AV 480 (480kw) - 2013 - 6 months warranty

External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Rotary grindstone holder support Supplied without internal grinding spindle Equipped with 1 lubricant tank Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Weight: approx 2 T

THIMON Shrink Wrapping Machine Brand: THIMON Model: HOTPAL 2000 Year of commissioning: 2011 Cycle counter: 114,250 Gas type: Propane Heating power: 370 kW Installed power: 13 kVA Voltage: 400V TNS Frame dimensions: 1450 x 1650 mm Maximum pallet dimensions: 1000 x 1200 x 2650 mm Maximum gross pallet weight: 1500 kg Machine weight: 2200 kg Comment: Equipment supplied includes shrink frame, lifting table, and safety enclosure with light curtains. Very good condition. Maintained by the manufacturer.

Type : S300 Rotating table diameter : 1500 mm, 1650 mm, 1800 mm, 2200 mm Capacity : 2000 kg Distance between column and rotating table : 500 mm Wrapping height : 2100 mm x 2600 mm x 3100 mm detected by photocell Table rotation regulated by inverter Table rotation stop position controlled by sensor Customisable film carrier speed Film carrier anti-fall device Work cycles controlled by PLC and electronic cardboard

Key data: 500 mm, 200 mm

Surface grinding machine Jung (built in 1949) for sale For sale is a Jung surface grinder, built in 1949, in age-appropriate condition. The machine is functional and can be viewed and tested on site. Technical data: Magnetic table: approx. 500 x 200 mm Year of Make: 1949 Condition: used, age-appropriate, functional The machine is ideal for use in the commercial sector or for lovers of classic machine tools. Sale only to tradespeople. Viewing possible by arrangement.

Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

380 V 16 A 63- 800 rpm Length 1 m Width 0.8 m Height 1.40 m Color: Green Machine is overhauled.

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories

Speed 32 - 1500 rpm Digital display 3 axes Mitutoyo Length 2.60 m Width 2 m Height 2.05 m Weight 3.5 t Color: Green Milling cutters Milling cutter mounts

Spiral mixer KEMPER, type: ST 30 -in bakery condition- - for 30 kg flour or 48 kg dough - Technical condition: good - Everything checked and cleaned - El. Connection: 380 V, 50 Hz, 3Ph, 16 A Visits and test runs are possible by arrangement.

380V 16 A Length 0.67 m Width 0.96 m Height 1.50 m Table

This 4-axis NORDEST HYDRA MP 110 boring machine was manufactured in 2005. Ideal for precision boring tasks, it offers robust construction and reliable performance. If you are looking to get high-quality boring capabilities, consider the NORDEST HYDRA MP 110 machine we have for sale. Contact us for more information.

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

Manufacturer: AgieCharmilles Model: EDM DRILL20 Year of Manufacture: 2013 Type of Machine : Start hole EDM machine Technical Specifications - Drill Diameters: 0.5 mm, 1 mm, 1.5 mm, 2 mm - Travel Distances: X 300 mm / Y 200 mm / Z 300 mm - Phase: 3 - Voltage: 380 V - Power: 4 KVA - Frequency: 50 Hz - Current: 4.5 A - Short-circuit Current: 10K A - Weight: 875 KG Condition and Accessories The machine is in used condition with normal signs of wear. Extensive accessories are included. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Gernep self-adhesive labeling machine is available. Nominal capacity: 2500bottles/h, running direction: RM, throughput capacity control range: 800-3000bottles/h, container format 1 diameter/height: 66mm/280mm, container format 2 diameter/height: 85mm/316mm, container volume 1/2: 500ml/1000ml, label dimensions X/Y: 160mm/17mm, label application: U-seal, conveyor height: 1000mm. Including self-adhesive dispenser unit and swing-top closure alignment. Documentation vorhanden. An on-site inspection is possible.

Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible.

A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible.

turning diameter: 550 mm turning length: 1500 mm control: Fagor 8055 x-axis: 108 mm z-axis: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire EDM machine Sodick AQ 537L with few operating hours

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 140 mm taper MK: 3 MK table-size: 380 x 360 mm feeds: über Handrad turning speeds: 85 - 1100 U/min total power requirement: 1,3 KW weight of the machine ca.: 0,27 t dimensions: 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TESA Visio 300 was manufactured in 2008, but is like new, has never been in use. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 150 mm. The machine includes a precision vice and a glass stage plate, enhancing its measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA Visio 300 machine we have for sale. Contact us for further details.

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details.

Used roller blind 2000 2 pieces Price is for 1 piece