capping machine used for sale

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

Key data: 6020 mm, 1 mm

used hydraulic Jorns long bending machine, with 5 wide stand units, with SN 1.25 motor scissors, bending beam width 16mm, with emergency/stop rail, foot switch, Control on the swivel bracket OP, with resettable sheet metal supports in the lower beam Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Projection 1000 mm Total power requirement 16 A Dimensions approx. 6800 x 1650 mm Weight 3200 kg Upper beam stroke (opening width) 200 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Color: Blue Machine number 9453-07

Key data: 3200 kN, 75 mm

BILLION HERCULE H2000 Series - 320 T Clamping Force : 320 T - 3200 kN Injection Unit : H 2000 Screw Diameter: 75 mm Year: 1998 Maximum Theoretical Volume : 1259 cm³ Maximum Material Pressure : 1587 bar Maximum Injection Flow Rate : 970 cm³/s Platen Dimensions : 1045 × 1045 mm Distance Between tie bar : 735 × 735 mm Dimensions : 7.6 x 2.1 x 2.6 m Weight : 15,500 kg

Key data: 11000 kN, 150 mm

Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

Year of Make: 2015 Machine type: BC 1001 HS Total production hours: 1608h Total standby time: 5070h

Key data: 430 mm, 1400 mm

Guide and pull spindle 32 A 380V 12.5 KW Speeds 18 - 1400 rpm Spindle passage 90 mm Lamp 4-way quick coupler with 14 pick-ups 3 interchangeable jaw sets Röhm Jaw Chuck with 33 cm Bezel Length 1.10 m Width 3 m Height 1.40 m Weight 2.5 T

Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible.

Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details.

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

Stock number: F1131, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Labelling machine, Standing: On wheels, Dimensions: L 1350 x W 1200 x H 1200 mm, Label size: Max H 120 mm, Label placement: On the side, Packaging form: Cylindrical, Roller: 3-roller system, Conveyor: Plastic lamella between 2 pcs. circular table, Ø 600 mm

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle turning speed range: 80-2200 U/min table-size: 600 x 200 mm dimensions of the machine ca.: 1400 x 1150 x 1600 mmxmmxmm weight of the machine ca.: 0.6 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm table-size: 950 x 450 mm table load: 300 - 350 kg tool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/min quill stroke: 95-100 mm vertical head swivelling: 90 Grad rapid traverse: 1400 mm/min total power requirement: 2,8 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 85 mm x-travel: 400 mm y-travel: 250 mm z-travel: 140 mm w-axis: 450 mm table surface area: 600 x 380 mm table load: 300 kg speeds: 30 - 2500 U/min adjustment speed: 0,02 - 0,08 mm/min tool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2750 x 1700 x 2700 mm - CNC Control Elesta 211 - with misc. tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U rapid traverse: 1200 mm/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1,265 x 1,08 x 1,62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OTT MEGAtronic 11 Paint Wide-belt calibration fine grinding machine 1. Grinding unit calibration roller DM 150 mm 90° Shore 2. Grinding unit with electronically controlled, segmented membrane sanding shoe Working width 1100 mm MEGA - Lacquer sanding package Feed speed infinitely variable 3-15 m/min Motor power 1. Grinding unit 11 kW Motor power 2nd grinding unit 11 kW with 2nd belt speed 4.5 m/sec Other optional accessories VACUUM TABLE VACUUM GENERATOR 3 kW Tape radiation Rigid sanding shoe for solid and frame grinding Machine is WORKSHOP overhauled in TOP - CONDITION from craft business from stock Lieboch

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.

PROCREA INJECTION BLOW MACHINE TYPE : Rev 100 This PROCREA REV 100 injection blow molding machine can produce fully finished, waste-free hollow containers, similar to injection molding, using various plastics. It features fully automatic cycles, with capacities ranging from 5 cc to 750 cc and weights from 5 g to 100 g. This machine is designed to work with molds of 1 to 4 cavities, and its high production rate is achieved thanks to the turret system, which performs all injection, blow molding, and finished part ejection operations in a single step. Mold construction for the Rev 100 is very simple thanks to the automatic extraction system applied to the turret.

Two-station machine for containers up to 5 ltr. With double head 180 mm center to center. 2 extruders - one for each side. With integrated leak tester, mill with feed belts, bottle belt. Material feeder and mixer.

PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

Peter Wolters AC 1000 F Double Sides Fine Grinding Machine The Peter Wolters AC 1000 F is a highly flexible double-sided batch processing machine with pneumatic loading system. Alternatively, the machine can be supplemented with a manual and fully automatic loading system. The swivel functionality enables optimal ergonomic access for the machine operator. Designed for high-precision series production of workpieces Optimum surface quality, flatness, thickness tolerance and plane parallelism with the tightest tolerances on the workpiece Broad portfolio of options to enable complex processes. Phone +49176 21 834 834

This 2-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details.

A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible.

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 193.231 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details.

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 132.756 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details.

bore capacity in steel (diameter): 30 mm throat: 275 mm bore stroke: 100 mm taper MK: 4 MK table-size: 420 x 340 mm feeds: nein mm/U turning speeds: 80 - 2000 U/min total power requirement: 0,9 / 1,45 KW weight of the machine ca.: 0,22 t dimensions: 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800 x 400 mm spindle taper ISO: Sk 40 spindle turning speed range: 10 - 3150 U/min quill stroke: mm total power requirement: 12,0 kVA weight of the machine ca.: 2,2 t dimensions: 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...

WMW MODUL ZFWZ 160/3 gear hobbing machine was built in 1971 in the GDR by VEB Werkzeugmaschinenkombinat 7. Oktober” Berlin. The machine is used in plants manufacturing extremely precise drive components for, among others, the automotive, aerospace and machinery industries. It enables the efficient machining of spur and worm gears with a maximum external diameter of 160 mm. The machining process is performed by means of a spindle with a cutter with a maximum diameter of 110 mm. The spindle of the MODUL ZFWZ 160X3 machine moves along the contour of the workpiece, cutting the material along its entire circumference. Using this method, it is possible to achieve the desired shapes and teeth finish with the highest accuracy. The WMW MODUL ZFWZ gear hobbing machine weighs 3000 kg. Technical specifications of the WMW MODUL ZFWZ 160/3 gear hobbing machine General data - maximum external di ...

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa  ...

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V  ...

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Availability: 11/2026 Find more here - .ucymachines/ Contact us at - sales@ucymachines

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.