capping machine used for sale

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.

MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes. Machine is without dosing unit / filler., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot  ...

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

sheet width: 1020 mm plate thickness: 2.5 mm : 45.0 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 285 kg range L-W-H: 1175 x 850 x 1175 mm Description: Swivel bending machine with patented hydraulic auxiliary cylinder and Remote control. The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. The motorized function is over a remote control operated with an emergency stop. Version S - with segmented upper beam for boxes and special profiles - Max. Bending angle 135 ° - Max. Opening upper beam 45 mm - The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported - The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. - the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software so ...

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

APV Gaulin G132T-3.6P high-pressure homogenizer – 15,000 l/h – 250 bar – very good condition Kebn Heytv Iisg Hd Nedk For sale is a high-performance high-pressure homogenizer from the manufacturer APV Gaulin, model G132T-3.6P, designed for industrial use in milk and beverage processing. The machine has been continuously serviced and is in good, fully functional condition. Ideally suited for applications such as milk, yoghurt drinks and similar products. Technical data: Manufacturer: APV Gaulin Type: G132T-3.6P Year of construction: 2000 Capacity: approx. 15,000 l/h Operating pressure: up to 250 bar Version: 2-stage Pistons: 3 Engine power: 137 kW Application: Milk / Yoghurt Drinks / Liquid Products Electric cabinet: available Condition: Machine is fully functional Regularly serviced during operation No known defects Ready to use immediate ...

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

Belshaw HI18F Icer unused, 2023, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph

This 3-axis HOFLER HF 600 was manufactured in 2010. It is designed for precision machining and offers advanced capabilities for various applications. If you are looking to get high-quality machining capabilities, consider the HOFLER HF 600 machine we have for sale. Contact us for further details.

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit.

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

Edge banding machine Type: EDGETEQ S-300 Manufacturer: Homag Year: 2020 Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible.

Die Sinking Machine AGIE AGIETRON IMPACT 3 - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 500 mm, Cross travel y axis: 350 mm, Vertical travel z axis: 500 mm, C axis travel: 360 °, Working table size: 800x600 mm, Work tank dimension: 1100x730x400 mm, Automatic electrode change nr.: 28, Power supply: AGIEVISION 2, Max working current: 72 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details.

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.

planing width: 30-260 mm planing height: 10-200 mm number of spindles: 6 Weight: 6650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details.

Dimensions (L/W/H): 660x460x1200 mm Weight: 49 kg Total power requirement: 0,85 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 2018. This Mazak QUICK TURN 200MA L features a maximum workpiece diameter of Ø 360 mm and a maximum workpiece length of 535 mm. It is equipped with a spindle speed of 5,000 rpm and a turret with 12 VDI positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN 200MA L machine we have for sale. Contact us for further details.

Pitch: 32 mm Working width: 896 mm Boring depth max.: 65 mm Motor output: 2x1,5 kW Overall size: 1122x1040x1250 mm Weight: 380 kg Number of boring spindles: 29 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.

Wheel diameter: 600 mm Cutting height: 480 mm Dimensions (L/W/H): 5200x1600x1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details.

Pitch: 32 mm Working width: 1088 mm Boring depth max.: 85 mm Motor output: 2x1,5 kW Overall size: 1320x1040x1250 mm Weight: kg Number of boring spindles: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details.

Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

Pitch: 32 mm Working width: 704 mm Boring depth max.: 70 mm Motor output: 1,5 kW Weight: 310 kg Number of boring spindles: 23 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details.

Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.