capping machine used for sale

: workpiece length - max.: mm max. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 6 st. Sanding height max.: 120 mm output: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

Hommel Rotormat 1000 Leftover Bread Chopper Univeral Chopper - Universal shredder - Suitable for chopping fresh or dry leftover bread - Suitable for grinding breadcrumbs, fruits, nuts - Clad in stainless steel Technical data: - 380V / 50Hz - Motor 3kW - Dimensions: 65x90x145cm (W x D x H) The Hommel Rotormat 1000 universal shredder is characterised by its efficiency and reliability. It is primarily suitable for chopping vegetables, but is also used for chopping light and dark leftover bread (leftover bread chopper). In addition, it can be used to make breadcrumbs, crush nuts (before roasting) and vegetables, grate frozen cheese and spices, and grind grains and grains. More information and pictures on request.

Used, fully functional ice cream maker Maximum capacity: 2.2 liters Ice cream ready in approximately 15 minutes 230 volts Air-cooled

Key data: 990 mm, 390 mm, 590 mm

For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels:  • X = 990 mm  • Y = 390 mm  • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

-A fully overhauled HUNDEGGER Speedcut SC2i – BJ. 2008 : - Feed cross conveyor 5 strands. - 5 axle saw. - Vertical combi : 1 x 4 axis turret cutter, 1 x drill rig 2.2KW, 1 x finger tiller 5.5KW. - Combi Horizontal : 1 x Drill 2.2KW - 1 x marking device from below. - Conveyor belt under the machine for disposal to the rear. - Preparation for airborne dust extraction (tube in the machine cabin. Immediately ready for loading. We recommend the construction and commissioning only by Hundegger.

Laminator LAM-120 - automatic thermo laminating machine year 2015 sheet size 120 x 160 cm paper weight 110-600 g/m2 Weight 2.500 kg lift for film rolls in production good condition

For sale is a used keyway slotting machine of the brand RUWO HAHNDORF, type SEF 32, built in 1977. Technical data : Weight: approx. 103 kg Connection: 380 V, Power: 0.8 kW Stroke: 330 mm Dimensions: length approx. 1200 mm, width approx. 400 mm, height approx. 1200 mm Highlights: Solid machine from 1977 – robust industrial quality. Ideal for machining keyways – suitable for industrial production or special tools, for example. Condition & Notes: The machine is used and fully functional.

Milling machine Manufacturer: Reckermann TYPE: Delta 1300 Year of Make: 1990 Working distances: 1000x400x450 Spindle speed 4500 rpm Feed speed 1000/min. Power 27kW Weight 5,000KG Automation No Accessories Paper Filters Works flawlessly

Sharpening range: up to 500 N/mm² 22 - 7.0 mm up to 1,000 N/mm² 21 - 8.0 mm over 1,000 N/mm² 20 - 8.0 mm Number of calibers: 10

Rotary Front- Back or 9/10'^ Wraparound Self Adhesive Labeller Machine Manufacturer: BRB Model: MEGA ADE 622 YOM: 2017 Label Stations: 2 Allen Bradley PLC/HMI Output: 3,200 containers per hour Rotary machine with carousel diameter of 480mm and 6 bottle platforms. Complete with; One set of bottle change parts One set of label parts 2 self adhesive stations CE safety guards 1 Extra set of can handling parts 1 Empty can pressurization system Labeller to run at 4,000 cph This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Qty. 1 Second-hand bottom seal bag making machine Brand & Model: ARVOR Built: 2009 Type of production: Bottom seal bags: Garbage bags Bags for fruit and vegetable Different type of bags Material that can be processed: LDPE, HDPE, MDPE Sealing width (bag width): Up to 1200 mm Draw length (bag length): 150 to 3400 mm No. of lanes: 1 Linear speed: Up to 150 m/min Bags per min.: 50 pcs/min Driving system: PLC controlled Operator interface terminal Print registration control Servo motor driven Sealing bar Attachments and accessories: Un-wind Photocell Anti-static bars

Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.

Folding machine Eurofold 235 ST Art.Nr. L1130 The folding machine has been serviced and is located in a excellent technical condition. A 3-month warranty applies to mechanical assemblies and parts.

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Small Table Folder

Key data: 400 mm, 150 mm

Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition

Paper folder

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

Suction Feeder, 2 pockets, Delivery

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

Pallet Feeder with Tremat Head, 1st Sation: 4 Pockets, 2nd Station: 4 Pockets, Mobile Knife, Delivery

Serial No. FH. FANB-000076, Flatpile Feeder With Tremathead And DCT Control, 4 Pockets, Delivery, Equipped With Heidelberg Gluing Unit, Format: Max. 40x84cm, Min. 10x15cm

Serial No. FH. FAPF-001439, Flatpile Feeder, 4 Pockets, Delivery

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories

2 Pockets, Delivery, serial: 5105

Suction Feeder, 2 Pockets, Compressor, Table Folding Machine

Suction Feeder, 2 Pockets, Delivery

Flatpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 2 Knives, Delivery

Roundpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, Delivery

Serial No. 041274DKAK

Folding Machine

Flatpile Feeder with Tremat Head, 4 Pockets, SAK 56 S2 Delivery

High Speed Paper Folding Machine, Counting and Batching, Digital Plate Adjustment For Accurate Reading, Sound Hoods, 6 Fold Types, Double Sheets and Jam Detector, Suctuion Feeding, Complete with Perforation Unit and Perforation Blades, Up To 240gsm, Speed: 27000 Sheets/Hours

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

max. format 74 x 104 cm Year of construction 2008 Pallet feeder with suction head Counting device L4 Upstream knife shaft 1st station: 8 fold pockets 74 cm Downstream knife shaft Transfer table for small format 2nd station: 6 fold pockets 74 cm Height adjustable Downstream knife shaft Roller diameter 42 mm / min. seam spacing 45 mm Window rebate bag Shed display Delivery date: short-term Price on request. Worldwide delivery & installation.

Material width 150 mm, material thickness 0.5 -3.0 mm Colour: green Total power requirement: 380 V Weight: 350 kg Dimensions: 800 x 1200 x 1350 mm Roller diameter: 24 mm Machine number 700257

Paper drill Nagel Citoborma 290 AB Year of manufacture 2015 Art.Nr. L1131

Key data: 510 mm, 250 mm, 5 kW

PANHANS 425 YOC 1993 Motor power: 5.5 kW  Rated current: 14.7 A Max. planing width: 510 mm Max. planing height: 250 mm 4-Knife Shaft Strip Planer Knife 2 feed speeds: 7 + 14 m/min. Height adjustment electrically (fine adjustment by handwheel) Altitude display via mech. Counter Link feed roller Articulated pressure beams Rubber pull-out roller (in good condition) 2 table sliding rollers Extraction connection: 160 mm incl. 2nd set of br. Planer Knife  incl. adjustment gauge Transport dimensions: WxDxH: 114 x 110.5 x 111 cm Weight: approx. 650 kg

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

Key data: 3000 mm, 8 mm

3-roll bending machine / round roller Schäfer SRMVHY – fully functional For sale is a used 3-roll bending machine (round roller / sheet metal bending machine) from the manufacturer Schäfer, model SRMVHY, built in 1992. The machine is in fully functional condition and is ready for immediate use. The rollers are hydraulically adjustable, which allows for precise and comfortable adjustment. The round bending machine is ideal for bending sheet metal in workshops and production plants. Technical data: Manufacturer: Schäfer Model No.: SRMVHY Year of Make: 1992 Max. sheet width: 3,000 mm Max. sheet thickness (mild steel): 8 mm Roller diameter: approx. 200 mm Voltage: 380 V Dimensions (L x W x H): approx. 5,300 x 1,800 x 1,300 mm Condition: used, fully functional Equipment: hydraulically adjustable rollers Changes and errors in the technical data, ...

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Technical data: 400 Volt / 50 Hz Year of Make: 2006 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring  ...