capping machine used for sale

bore capacity in steel (diameter): 22 mm throat: 270 mm spindle turning speed - stepless: U/min weight of the machine ca.: 1.1 t dimensions of the machine ca.: 1.2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm

Inv. Num. : 8856 Type: SL-10 THE Producer: HAAS Created: 2006 Parameters: Switch-on hours: 23550 h Hours: 13463 h Maximum turning length: 355 mm Maximum turning diameter: 279 mm Maximum turning diameter over bed: 252 mm Maximum turning diameter over support: 203 mm Maximum length of travel in the X-axis: 159 mm Max. travel length of the Z-axis: 356 mm Maximum spindle speed: 6000 1/min Weight: 2500 kg Equipment: Collet chuck Universal chuck

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Key data: 1100 mm, 2 , 180 mm

Broadband KÜNDIG Made in SUISSE - 1100 mm grinding width, 180 mm height - 2nd strip with: three-roller units / 2nd grinding roller with shoe for fine sanding - Grinding table Fix Sodas can be sanded in a continuous flow ( KUNDIG patent) - Electronic control The machine is immediately available from stock The price is: 4.900,-€ net from stock. That's a great price! A demonstration is possible

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...

Stock number: F1118, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Dimensions: L 500 x W 400 x H 400 mm, Total height: H 700 mm, Piston stroke per min.: Max 28 SPM, Variable speed: Yes, Filling heads: 1 pc., Dosage: 0-300 ml, Motor: 220 Volt, Manufacturer: Lindeløv & Striegler, Type: Packmaster, Model: D. C. 300, Other: For creme etc.

sheet width: 1070 mm plate thickness: 4 mm distance between columns: 1100 mm diameter of upper rolls: 110 mm total power requirement: 5,0 KW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 0,9 x 1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.

sheet width: 1270 mm plate thickness: 2,0 mm distance between columns: 1295 mm daylight opening: 46 mm : 135 ° total power requirement: Handbetrieben weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,8 x 1,2 m Segment bending machine, new. Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm. Including material stop, max 660mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 9.0 / 10,0 mm distance between columns: 1070 mm diameter of upper rolls: 190 mm pre-bending capacity: 9,0 mm connected load: 5,3 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning lenght 450 mm Turning diameter 210 mm With C axis Spindle bore 52 mm Number of tools 12 Spindle speed 5000 rpm Controller Heidenhain Plus it

Max. size= 46 x 32 cm, Availability= 122025, Input Paper standard Size: max 320 x 460 mm, min 140 × 150 mm. For longer sheets an optional feed tray is required Input Paper Weight: 110 - 350 gsm Paper Type: Uncoated paper, coated paper, laminated paper Feeder Capacity: 100mm Feeder Type: Belt suction Number of Creases: Up to 15 creases per document across the paper direction Crease Depth Adjustment: 3 steps (from control panel) Tolerance of creaser: / - 0,3 mm Memories: 30 Minimum Repeat Distance: 0,1 mm Dimensions: (LxWxH) 1262 × 618 × 1090 mm Weight: 114 kg Power suppy: 230V AC, 50Hz, power consumption 160W, 0.6A LOT Loaded in truck or container

for twist drills: 3 - 50 mm Ø Acute angle: 90 - 140° Adjustable clearance angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swivel movement: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20/90 x 20 mm Space requirement: 800 x 550 x 1140 mm

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.

IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available

Manufacturer: WMS Model: W10 Year of Manufacture: 2014 Weight: 2800 kg Connected Load: 23 kW Rated Current: 33 A Operating Voltage: 400 V / 50 Hz Control Voltage 1: 24 V Control Voltage 2: not specified in plate Air Consumption: 9 m³/h System Pressure: 6 bar Certification: CE Find more here - .ucymachines/ Contact us at - sales@ucymachines

Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

arm length: 1600 mm taper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment.

- flat pile feeder - 1. Station 4 buckles - 2. Station 4 buckles - standard delivery

Holz Her Sprint 1312 FÜ + PU heavy version - edge thickness 0.4 - 12 mm PLC Screen Control Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for roll and strip goods up to 12 mm edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling 12 mm, radius milling - chamfer milling - 15° MOT - 4 axis Scraper unit for chamfers and radii with 2 pneum scraper carriers. Pneumatic engagement and disengagement Surface Scraper Unit - Finish Spraying Device - PU Machine in TOP CONDITION from stock Lieboch

- Programm - air table - side table left and right - spare knife

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

used spiral mixer Kemper ST 125 AE extendable, overhauled, for 125 kg flour per boiler, with 2 clocks, with 1 stainless steel kettle, if necessary with 1 more kettle, stainless steel spiral, new electrics, repainted, new bearings, new V-belts, clocks overhauled, No. 6726112/608003, 25 A, 400 V, 50 Hz

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

Key data: 3 mm, 1050 mm

Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Intermittent-motion blister machine with plate sealing and manual product feeding, incl. filling station for liquids. The machine can process ALU/PVC. Output: 15–50 cycles/min at 12 mm forming depth 15–40 cycles/min at 28 mm forming depth

Originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Working Description: Automatic Push-O / Press-On 3-head capper suitable for plug caps (please see photos) with an output up to 90 caps per minute (depending on cap type and bottle being processed). Stainless steel fully guarded construction, lastly used with jars of 29.5mm DIA and with caps at 19mm DIA (12.5mm neck) + 16mm cap height + 11.6mm cap height. Stainless steel construction 720mm DIA rotary cap sorter with Perspex cover and lid. Comes with two additional sets of format parts including star wheel and guides. Suitable for Pharmaceutical, Cosmetics, Nutrition, Contract Manufacturing, Food, Medical Devices, Chemical and others. Technical Information: Size (machine): L: 3000m ...

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

swing diameter: 560 mm turning length: 800 mm control: C200-4D Siemens 840 D Main spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1 bar capacity: 90 mm spindle diameter in front bearing: 140 mm turning speed range - spindle: ~ 3.500 U/min drive capacity - spindle motor: 100% / 40%: 43 / 57 kW Torque: 275 / 363 Nm Indexing: 2,5 ° C-Axis: 0,001 ° turret:: Number of Turrets: 1 number of toolpositions: 12 pos. Spindle speed - driven tool stations: ~ 6.000 min -1 power capacity - driven tool-stations: 11 kW tool taper: 40 x 63 mm DIN 69880 Torque: 21,5 Nm travel -x axis: 300 mm travel -z axis: 800 mm rapid traverse: X/Z: 30 / 22,5 m/min feed power: X: 7.200 N feed power: Z: 9.000 N Tailstock:: dia. of quill: 65 mm Cone: SK 30 longitudinal travel: 800 mm rapid traverse: 10 m/min total power requirement: 51 kVA weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 7,3 x 4,0 ...

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 179 kg,

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

Height=1.95 m, Overall length= 1.55 m, Overall width= 1.32 m, Net weight= 577 kg,

Height=1.21 m, Overall length= 1.17 m, Overall width= 0.98 m, Net weight= 118 kg,

Height=1.85 m, Overall length= 1.18 m, Overall width= 0.9 m, Net weight= 122 kg,

Height=1.65 m, Overall length= 0.94 m, Overall width= 0.89 m, Net weight= 186 kg,

Height=2.31 m, Overall length= 3.62 m, Overall width= 0.82 m, Net weight= 504 kg,

Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x850x1300 mm Weight: 420 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.