capping machine used for sale

Stock number: DT083, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: 260 - 520 pcs/min, Stations: 16 pcs., Variable speed: Yes, Tablet size: Max 25 mm, Dimensions: L 950 x W 950 x H 1850 mm, Documentation: Yes

max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,

Height=0.5 m, Overall length= 0.3 m, Overall width= 0.55 m, Net weight= 38 kg,

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

De-warping machine, strip descaler Maja Skinny, with new feed belt, table for open use, Connection 400V, dimensions LxWxH approx. 95x85x120cm, weight approx. 192kg, year of construction 1999, The machine is in very good condition, runs smoothly.

Technical data shown on picture. Parts shown by hand not come.

Key data: 6300 mm, 11200 mm, 4800 mm

Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...

Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear Stages: 3 Mount: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (man./program.) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg Various tools (without cabinet)

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Key data: 220 kN, 22 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

Size: 500 mm Equipments: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Size: 540 x 760 mm Equipments: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg (without conveyor)

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400/500 mm CNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mm crown gear diamter max.: 500 mm x-axis: +/- 70 mm y-axis: 200 mm z-axis: 200 mm axis angle: 90 Grad speeds:: R 0 - 3000 / T 0 - 5000 1/min rated current: 30 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,2 x 2,5 x 2,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mm gear width: 630 mm max. module: 16 min. module: 1 wheel diameter with counterstay: 800 mm max. number of teeth: 999 clamping length: 1060 mm workpiece weight: 1500 kg max.helical angle: 45 ° grinding spindle drive: ca. 20 kW Control: Opal / Siemens total power requirement: 70 kW weight of the machine ca.: 17,5 t - CNC control Opal / Indramat with Siemens S5 PLC - paperbandfilter - oil mist exhauster - complete covering The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.87 m, Overall length= 1.16 m, Overall width= 0.64 m, Net weight= 115 kg,

Krones Sleevematic – Multireel – Shrinkmat Sleeve Labeling System Complete shrink sleeve labeling solution combining three advanced Krones technologies into a fully integrated system for the decoration and labeling of PET and glass containers. The system ensures high precision, continuous operation, and maximum production efficiency in modern beverage bottling lines. General Information - Manufacturer: Krones - System Type: Shrink sleeve application and shrinking system - Maximum Capacity: up to 39,000 bottles per hour - Bottle Sizes: 250 ml – 1,500 ml - Container Types: PET and glass bottles Delivery Scope - The system includes the following equipment: - 1 × Krones Sleevematic TS - 1 × Krones Multireel S - 1 × Krones Shrinkmat System Components Krones Sleevematic TS - High-performance sleeve applicator designed for precise application of shrink sleeves on ...

1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump

Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg

ABL PDS 50 is apple peeler machine. Good working condition.

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Heidelberg Stahlfolder Ti 52/6/4 K with gluing year 2008 Feeder 1 unit 6 buckles 2 unit 4 buckles 1 knife Gluing Device good condition

x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Machine weight approx. 0.8 t Various engraving sets

Table dimensions X/Y: 750mm/750mm, table height adjustment: 100mm, throat depth: 600mm, milling spindle stroke: 140mm, spindle swivel: +/-90°, machine dimensions X/Y/Z: approx. 750mm/1050mm/1600mm, weight: approx. 450kg. An on-site inspection is possible.

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2.2 kW motor: 400 Volt 50 Hz oil volume: 12.0 ltr. weight: 530 kg range L-W-H: 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 35.0 TS mm cutting range for steel to: 25.0 QS mm ampere: 20 - 65 Ampere cutting medium: Druckluft voltage: 400 V output: Eingang 7.8 KW weight: 51.5 kg range L-W-H: 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage su ...

x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 300 mm feed:: 30-830 / 23-625 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 60 - 460 mm rapid traverse: Z Achse 750 mm/min throat: 95 - 575 mm total power requirement: 3.0 kW weight of the machine ca.: 1505 kg range L-W-H: 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included  ...

x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1120 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45.0 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2.2 kW weight of the machine ca.: 1380 kg range L-W-H: 1570 x 1470 x 1660 mm Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes includ ...

bore capacity in steel (diameter): 13,0 mm x-travel: 300 mm y-travel: 130 mm turning speeds: 100 - 2500 U/min throat: 165 mm spindle taper MT: 3 MK table-size: 490 x 120 mm diameter of hob: 30,0 mm motor: 230 Volt total power requirement: 0,75 kW weight of the machine ca.: 50 kg. dimensions of the machine ca.: 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60,0 mm arm length: 350 - 1.600 mm workpiece height max.: 665 x 1.250 mm turning speeds: 38 - 2.000 U/min spindle taper MT: 5 MK base plate: 960 x 1.760 mm threading: 42 M quill stroke: 325 mm total power requirement: 4,0 kW weight of the machine ca.: 3.800 kg. range L-W-H: 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6,5 mm ST 40 : 3,5 mm VA : 90° Grad blade length: 250 x 250 mm table:: 810 x 750 mm work height max.: 950 mm engine output: 4,0 weight: 630 kg range L-W-H: 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6.0 mm ST 40 : 3.0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35.0 in 6.0 mm ST 40 Throat / punching unit: 135 mm engine output: 4.0 kW weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad  ...

: 3.0 mm ST 40 : 2.0 mm VA : 90.0 Grad blade length: 130 x 130 mm table:: 640 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 200 kg range L-W-H: 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm throat: 260 mm distance between roll centers: 132 mm stroke: 55.0 OW mm tool adaptor: Ø 35 mm, 12 mm Nut mm total power requirement: 3.0 kW weight of the machine ca.: 450 kg. range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data fo ...

plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm throat: 270 (140) mm distance between roll centers: 60.0 mm total power requirement: manuell kW weight of the machine ca.: 46.0 kg dimensions of the machine ca.: 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar 0: 184 Liter 0: Luft .. 3/8 Zoll weight: 125 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll weight: 160 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.